Re: PCMCIA modem not found... resume/suspend helps some times... magic is not found

[Yaroslav Halchenko <kernel@onerussian.com>]

Dear Kernel People,

Since nobody followed up I've decided to provide additional information
which might help to pin point the problem.
I've loaded pcmcia_core with pc_debug=255

Troublesome lines for me are:

Jul  5 15:52:25 vaio kernel: pcmcia: registering new device pcmcia0.0
Jul  5 15:52:25 vaio kernel: cs: pcmcia_socket0: cs: overrun in pcmcia_get_next_tuple
Jul  5 15:52:26 vaio kernel: cs: pcmcia_socket0: cs: overrun in pcmcia_get_next_tuple

Full kern.log is available from
http://www.onerussian.com/Linux/bugs/pcmcia.modem/kern.log.debug

Please advise what else could I do to revive this modem to life

Thank you in advance

On Sat, 24 Jun 2006, Yaroslav Halchenko wrote:

> Dear Kernel People,

> Before my long trip abroad I decided to make my pcmcia modem work under
> fresh 2.6.17-rc6-mm2.

> It wasn't found at all... after some dancing around it started to
> to appear after pccardctl suspend, pccardctl resume calls.
> After reboot it stopped to do that... now max I could make it is to find
> it partially without binding to loaded serial_cs:

> > sudo pccardctl status
> Socket 0:
> 5.0V 16-bit PC Card
> Subdevice 0 (function 0) [unbound]

> Some information from magic successful initialization is available
> in my bug failed on Debian:
> http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=374742

> and modem was found to be
>     SUBSYSTEM=="pcmcia"
>     SYSFS{modalias}=="pcmcia:m016Cc0001f02fn00pfn00paF5F025C2pb200E6E61pc26477DB8pdC5F4D6FD"
>     SYSFS{prod_id4}=="V8.041"
>     SYSFS{prod_id3}=="56K+Fax"
>     SYSFS{prod_id2}=="Gold Card Global 56K+Fax"
>     SYSFS{prod_id1}=="Psion Dacom"
>     SYSFS{card_id}=="0x0001"
>     SYSFS{manf_id}=="0x016c"
>     SYSFS{func_id}=="0x02"
>     SYSFS{pm_state}=="on"
>     SYSFS{function}=="0x00"

> information on current system where I can't make it work any more
> http://www.onerussian.com/Linux/bugs/pcmcia.modem/

> Here are the results of suspend/resume sequence:

> *> sudo pccardctl eject
> *> sudo pccardctl insert
> > sudo pccardctl status
> Socket 0:
> 5.0V 16-bit PC Card
> > sudo pccardctl suspend
> > sudo pccardctl status
> Socket 0:
> X.XV 16-bit PC Card [suspended]
> > sudo pccardctl resume
> > sudo pccardctl status
> Socket 0:
> 5.0V 16-bit PC Card
> Subdevice 0 (function 0) [unbound]

> Please advise!
-- 
Yaroslav Halchenko
Research Assistant, Psychology Department, Rutgers-Newark
Office: (973) 353-5440x263 | FWD: 82823 | Fax: (973) 353-1171
        101 Warren Str, Smith Hall, Rm 4-105, Newark NJ 07102
Student  Ph.D. @ CS Dept. NJIT