From: Srihari Vijayaraghavan <sriharivijayaraghavan@yahoo.com.au>
To: lkml <linux-kernel@vger.kernel.org>
Subject: 2.6.18-rc1 Freezes on CDROM Access
Date: Fri, 7 Jul 2006 13:54:48 +1000 (EST) [thread overview]
Message-ID: <20060707035448.31952.qmail@web52605.mail.yahoo.com> (raw)
When I insert a CD in the CDROM or CD-RW drive, it
freezes solid. No serial console output (OOPS, BUGs or
panics) or sysrq response.
I narrowed it down to 2.6.17-git21-git22 (using the
daily git snapshots), which is rather a huge patch.
Any particular candidate?
Here's the lspci:
00:00.0 Host bridge: Intel Corporation
82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub
Interface (rev 01)
00:02.0 VGA compatible controller: Intel Corporation
82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics
Device (rev 01)
00:1d.0 USB Controller: Intel Corporation
82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI
Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation
82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI
Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation
82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI
Controller #3 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM
(ICH4/ICH4-M) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge
(rev 81)
00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL
(ICH4/ICH4-L) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801DB
(ICH4) IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
00:1f.5 Multimedia audio controller: Intel Corporation
82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio
Controller (rev 01)
02:08.0 Ethernet controller: Intel Corporation 82801DB
PRO/100 VE (LOM) Ethernet Controller (rev 81)
Here's the CD drives info:
...
Uniform Multi-Platform E-IDE driver Revision:
7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] ->
GSI 5 (level, low) -> IRQ 5
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1860-0x1867, BIOS settings:
hda:DMA, hdb:pio
ide1: BM-DMA at 0x1868-0x186f, BIOS settings:
hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: IC35L060AVV207-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 512KiB
hda: 78156288 sectors (40016 MB) w/1821KiB Cache,
CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9
hda10 hda11 >
Probing IDE interface ide1...
hdc: LITE-ON LTR-48246S, ATAPI CD/DVD-ROM drive
hdd: HL-DT-ST CD-ROM GCR-8482B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
...
hdc: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache,
UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33)
...
More info on request.
Thanks
____________________________________________________
Do you Yahoo!?
Check out gigs in your area on the comprehensive Yahoo! Music Gig Guide
http://au.music.yahoo.com/gig-guide
reply other threads:[~2006-07-07 3:54 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060707035448.31952.qmail@web52605.mail.yahoo.com \
--to=sriharivijayaraghavan@yahoo.com.au \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®