From: Andrew Morton <akpm@osdl.org>
To: Pavel Machek <pavel@ucw.cz>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.6.18-rc1: breaks boot on thinkpad x32
Date: Fri, 7 Jul 2006 04:01:56 -0700 [thread overview]
Message-ID: <20060707040156.e385670e.akpm@osdl.org> (raw)
In-Reply-To: <20060707105041.GA1656@elf.ucw.cz>
On Fri, 7 Jul 2006 12:50:41 +0200
Pavel Machek <pavel@ucw.cz> wrote:
> Hi!
>
> I tried to update to 2.6.18-rc1-git, but got hang after
>
> acpiphp: Slot [1] registered
>
> ...but acpi=off failed to workaround the problem, it merely hung at
> another place. I went back to 2.6.18-rc1, and it hung at same
> place.
There have been no post-2.6.18-rc1 commits yet.
> 2.6.17 works. Any ideas?
Nope. Is the hang during initial bootup or during modprobing?
If during initial bootup, try adding initcall_debug to the boot command line.
If modular, work out which module is being bad?
It might be the cm_sbs driver. (initcall_debug will point at
acpi_cm_sbs_init()). If so, this'll help.
diff -puN drivers/acpi/cm_sbs.c~acpi-initialise-cm_sbs_sem drivers/acpi/cm_sbs.c
--- a/drivers/acpi/cm_sbs.c~acpi-initialise-cm_sbs_sem
+++ a/drivers/acpi/cm_sbs.c
@@ -39,50 +39,43 @@ ACPI_MODULE_NAME("cm_sbs")
static struct proc_dir_entry *acpi_ac_dir;
static struct proc_dir_entry *acpi_battery_dir;
-static struct semaphore cm_sbs_sem;
+static DEFINE_MUTEX(cm_sbs_mutex);
-static int lock_ac_dir_cnt = 0;
-static int lock_battery_dir_cnt = 0;
+static int lock_ac_dir_cnt;
+static int lock_battery_dir_cnt;
struct proc_dir_entry *acpi_lock_ac_dir(void)
{
-
- down(&cm_sbs_sem);
- if (!acpi_ac_dir) {
+ mutex_lock(&cm_sbs_mutex);
+ if (!acpi_ac_dir)
acpi_ac_dir = proc_mkdir(ACPI_AC_CLASS, acpi_root_dir);
- }
if (acpi_ac_dir) {
lock_ac_dir_cnt++;
} else {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"Cannot create %s\n", ACPI_AC_CLASS));
}
- up(&cm_sbs_sem);
+ mutex_unlock(&cm_sbs_mutex);
return acpi_ac_dir;
}
-
EXPORT_SYMBOL(acpi_lock_ac_dir);
void acpi_unlock_ac_dir(struct proc_dir_entry *acpi_ac_dir_param)
{
-
- down(&cm_sbs_sem);
- if (acpi_ac_dir_param) {
+ mutex_lock(&cm_sbs_mutex);
+ if (acpi_ac_dir_param)
lock_ac_dir_cnt--;
- }
if (lock_ac_dir_cnt == 0 && acpi_ac_dir_param && acpi_ac_dir) {
remove_proc_entry(ACPI_AC_CLASS, acpi_root_dir);
acpi_ac_dir = 0;
}
- up(&cm_sbs_sem);
+ mutex_unlock(&cm_sbs_mutex);
}
-
EXPORT_SYMBOL(acpi_unlock_ac_dir);
struct proc_dir_entry *acpi_lock_battery_dir(void)
{
-
- down(&cm_sbs_sem);
+ mutex_lock(&cm_sbs_mutex);
if (!acpi_battery_dir) {
acpi_battery_dir =
proc_mkdir(ACPI_BATTERY_CLASS, acpi_root_dir);
@@ -93,39 +86,28 @@ struct proc_dir_entry *acpi_lock_battery
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"Cannot create %s\n", ACPI_BATTERY_CLASS));
}
- up(&cm_sbs_sem);
+ mutex_unlock(&cm_sbs_mutex);
return acpi_battery_dir;
}
-
EXPORT_SYMBOL(acpi_lock_battery_dir);
void acpi_unlock_battery_dir(struct proc_dir_entry *acpi_battery_dir_param)
{
-
- down(&cm_sbs_sem);
- if (acpi_battery_dir_param) {
+ mutex_lock(&cm_sbs_mutex);
+ if (acpi_battery_dir_param)
lock_battery_dir_cnt--;
- }
if (lock_battery_dir_cnt == 0 && acpi_battery_dir_param
&& acpi_battery_dir) {
remove_proc_entry(ACPI_BATTERY_CLASS, acpi_root_dir);
acpi_battery_dir = 0;
}
- up(&cm_sbs_sem);
+ mutex_unlock(&cm_sbs_mutex);
return;
}
-
EXPORT_SYMBOL(acpi_unlock_battery_dir);
static int __init acpi_cm_sbs_init(void)
{
-
- if (acpi_disabled)
- return 0;
-
- init_MUTEX(&cm_sbs_sem);
-
return 0;
}
-
subsys_initcall(acpi_cm_sbs_init);
_
next prev parent reply other threads:[~2006-07-07 11:02 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-07-07 10:50 Pavel Machek
2006-07-07 11:01 ` Andrew Morton [this message]
2006-07-08 12:06 ` 2.6.18-rc1: breaks boot on thinkpad x32 -- acpiphp problems? Pavel Machek
2006-07-08 12:24 ` Pavel Machek
2006-07-08 16:33 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060707040156.e385670e.akpm@osdl.org \
--to=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pavel@ucw.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome