From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1161096AbWGIGJp (ORCPT ); Sun, 9 Jul 2006 02:09:45 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1161097AbWGIGJp (ORCPT ); Sun, 9 Jul 2006 02:09:45 -0400 Received: from mx2.mail.ru ([194.67.23.122]:64356 "EHLO mx2.mail.ru") by vger.kernel.org with ESMTP id S1161096AbWGIGJo (ORCPT ); Sun, 9 Jul 2006 02:09:44 -0400 From: Andrey Borzenkov To: linux-input@atrey.karlin.mff.cuni.cz Subject: pnp: Failed to activate device 00:05. on resume from STR Date: Sun, 9 Jul 2006 10:09:34 +0400 User-Agent: KMail/1.9.3 Cc: linux-kernel@vger.kernel.org Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200607091009.39746.arvidjaar@mail.ru> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I noticed that after resuming from suspend to RAM I consistently get pnp: Failed to activate device 00:05. pnp: Failed to activate device 00:06. pnp: Device 00:09 activated. according to lpsnp: 00:05 PNP0303 IBM enhanced keyboard (101/102-key, PS/2 mouse support) 00:06 PNP0f13 PS/2 port for PS/2-style mice lspnp -vv and dmesg since boot follow. This is almost vanilla 2.6.17.4 + recent libtata from tj. - -andrey {pts/1}% lspnp -vv 00:00 PNP0c01 System board state = active allocated resources: mem 0x0-0x9ffff mem 0xe0000-0xeffff mem 0xf0000-0xfffff mem 0x100000-0x1ef5ffff 00:01 PNP0a03 PCI bus state = active allocated resources: io 0xcf8-0xcff mem 0x0-0xff mem 0x0-0xcf7 mem 0xd00-0xffff mem 0xa0000-0xbffff 00:02 PNP0200 AT DMA controller state = active allocated resources: io 0x0-0xf io 0x81-0x83 io 0x87-0x87 io 0x89-0x8b io 0x8f-0x8f io 0xc0-0xdf dma 4 00:03 PNP0800 AT speaker state = active allocated resources: io 0x61-0x61 00:04 PNP0c04 Math coprocessor state = active allocated resources: io 0xf0-0xff irq 13 00:05 PNP0303 IBM enhanced keyboard (101/102-key, PS/2 mouse support) state = active allocated resources: io 0x60-0x60 io 0x64-0x64 irq 1 00:06 PNP0f13 PS/2 port for PS/2-style mice state = active allocated resources: irq 12 00:07 PNP0b00 AT real-time clock state = active allocated resources: io 0x70-0x71 irq 8 00:08 PNP0c02 Motherboard resources state = active allocated resources: io 0x2e-0x2f io 0x62-0x62 io 0x66-0x66 io 0x80-0x80 io 0x84-0x86 io 0x88-0x88 io 0x8c-0x8e io 0x92-0x92 00:09 PNP0501 16550A-compatible serial port state = active allocated resources: io 0x3f8-0x3ff irq 4 possible resources: irq 3,4,5,6,7,10,11 High-Edge Dependent: 01 - Priority acceptable port 0x3f8-0x3f8, align 0x0, size 0x8, 16-bit address decoding Dependent: 02 - Priority acceptable port 0x2f8-0x2f8, align 0x0, size 0x8, 16-bit address decoding Dependent: 03 - Priority acceptable port 0x2e8-0x2e8, align 0x0, size 0x8, 16-bit address decoding Dependent: 04 - Priority acceptable port 0x3e8-0x3e8, align 0x0, size 0x8, 16-bit address decoding 00:0a SMCf010 SMC Fast Infrared Port state = disabled possible resources: port 0x100-0x130, align 0xf, size 0x8, 16-bit address decoding irq 3,4,5,6,7,10,11 High-Edge dma 1,2,3 16-bit compatible Dependent: 01 - Priority acceptable port 0x3f8-0x3f8, align 0x0, size 0x8, 16-bit address decoding Dependent: 02 - Priority acceptable port 0x2e8-0x2e8, align 0x0, size 0x8, 16-bit address decoding Dependent: 03 - Priority acceptable port 0x2f8-0x2f8, align 0x0, size 0x8, 16-bit address decoding Dependent: 04 - Priority acceptable port 0x3e8-0x3e8, align 0x0, size 0x8, 16-bit address decoding 00:0b PNP0401 ECP printer port state = active allocated resources: io 0x378-0x37a io 0x778-0x77a irq 7 dma 3 possible resources: dma 1,2,3 8-bit compatible Dependent: 01 - Priority acceptable port 0x378-0x378, align 0x0, size 0x3, 16-bit address decoding port 0x778-0x778, align 0x0, size 0x3, 16-bit address decoding irq 7 High-Edge Dependent: 02 - Priority acceptable port 0x278-0x278, align 0x0, size 0x3, 16-bit address decoding port 0x678-0x678, align 0x0, size 0x3, 16-bit address decoding irq 5 High-Edge Dependent: 03 - Priority acceptable port 0x3bc-0x3bc, align 0x0, size 0x3, 16-bit address decoding port 0x7bc-0x7bc, align 0x0, size 0x3, 16-bit address decoding irq 7 High-Edge Linux version 2.6.17.4-1avb (bor@cooker) (gcc version 4.1.1 20060518 (prerelease)) #30 Sat Jul 8 23:15:13 MSD 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved) BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS) BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ef60000 (usable) BIOS-e820: 000000001ef60000 - 000000001ef70000 (ACPI data) BIOS-e820: 000000001ef70000 - 0000000020000000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 495MB LOWMEM available. On node 0 totalpages: 126816 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 122720 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v000 TOSHIB ) @ 0x000f0090 ACPI: RSDT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x1ef60000 ACPI: FADT (v002 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x1ef60054 ACPI: DSDT (v001 TOSHIB 4000 0x20020417 MSFT 0x0100000a) @ 0x00000000 ACPI: PM-Timer IO Port: 0xee08 Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000) Built 1 zonelists Kernel command line: root=/dev/sda2 resume=/dev/sda1 elevator=cfq vga=791 Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (013e4000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 747.722 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 499068k/507264k available (1660k kernel code, 7640k reserved, 794k data, 180k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1496.83 BogoMIPS (lpj=748415) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel Pentium III (Coppermine) stepping 0a Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 0k freed ACPI: setting ELCR to 0200 (from 0a00) checking if image is initramfs... it is Freeing initrd memory: 302k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfe5ae, last bus=5 Setting up standard PCI resources ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI quirk: region ee00-ee3f claimed by ali7101 ACPI PCI quirk: region ef00-ef1f claimed by ali7101 SMB Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: Power Resource [PFAN] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca) PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: f7f00000-fdffffff PREFETCH window: 3c000000-3c0fffff PCI: Bus 2, cardbus bridge: 0000:00:10.0 IO window: 00001000-000010ff IO window: 00001400-000014ff PREFETCH window: 30000000-31ffffff MEM window: 32000000-33ffffff PCI: Bus 6, cardbus bridge: 0000:00:11.0 IO window: 00001800-000018ff IO window: 00001c00-00001cff PREFETCH window: 34000000-35ffffff MEM window: 36000000-37ffffff PCI: Bus 10, cardbus bridge: 0000:00:11.1 IO window: 00002000-000020ff IO window: 00002400-000024ff PREFETCH window: 38000000-39ffffff MEM window: 3a000000-3bffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Enabling device 0000:00:10.0 (0000 -> 0003) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Enabling device 0000:00:11.0 (0000 -> 0003) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Enabling device 0000:00:11.1 (0000 -> 0003) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:11.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 6, 262144 bytes) TCP bind hash table entries: 8192 (order: 5, 163840 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered audit: initializing netlink socket (disabled) audit(1152386664.315:1): initialized Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Activating ISA DMA hang workarounds. vesafb: framebuffer at 0xfc000000, mapped to 0xdf880000, using 3072k, total 16384k vesafb: mode is 1024x768x16, linelength=2048, pages=9 vesafb: protected mode interface info at c000:775e vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice NET: Registered protocol family 1 Using IPI Shortcut mode ACPI wakeup devices: COM USB1 ASND VIY0 VIY1 LAN MPC0 MPC1 NOV0 LID ACPI: (supports S0 S3 S4 S5) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 180k freed Write protecting the kernel read-only data: 516k SCSI subsystem initialized input: AT Translated Set 2 keyboard as /class/input/input0 libata version 2.00 loaded. ACPI: PCI Interrupt 0000:00:04.0[A]: no GSI ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xEFF0 irq 14 scsi0 : pata_ali ata1.00: ATA-5, max UDMA/100, 39070080 sectors: LBA ata1.00: ata1: dev 0 multi count 0 ata1.00: configured for UDMA/33 Vendor: ATA Model: IC25N020ATDA04-0 Rev: DA3O Type: Direct-Access ANSI SCSI revision: 05 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xEFF8 irq 15 scsi1 : pata_ali input: ImPS/2 Generic Wheel Mouse as /class/input/input1 ata2.00: ATAPI, max UDMA/33 ata2.00: configured for PIO4 Vendor: TOSHIBA Model: DVD-ROM SD-C2502 Rev: 1313 Type: CD-ROM ANSI SCSI revision: 05 SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back spurious 8259A interrupt: IRQ7. SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sd 0:0:0:0: Attached scsi disk sda ReiserFS: sda2: found reiserfs format "3.6" with standard journal ReiserFS: sda2: using ordered data mode ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda2: checking transaction log (sda2) ReiserFS: sda2: Using r5 hash to sort names usbcore: registered new driver usbfs usbcore: registered new driver hub ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 11, io mem 0xf7eff000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected ALi M1644 chipset agpgart: AGP aperture is 64M @ 0xf0000000 ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:00:10.0 [12a3:ab01] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:10.0, mfunc 0x01000002, devctl 0x60 Yenta: ISA IRQ mask 0x0000, PCI irq 11 Socket status: 30000059 ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:00:11.0 [1179:0001] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 Socket status: 30000007 pccard: PCMCIA card inserted into slot 0 cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcbfff 0xe0000-0xfffff cs: memory probe 0x60000000-0x60ffffff: clean. cs: memory probe 0xa0000000-0xa0ffffff: clean. pcmcia: registering new device pcmcia0.0 ACPI: PCI Interrupt 0000:00:11.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:00:11.1 [1179:0001] wlags49_h1_cs v7.18 for PCMCIA, 03/31/2004 14:31:00 by Agere Systems, http://www.agere.com *** Modified for kernel 2.6 by Andrey Borzenkov $Revision: 25 $ *** Station Mode (STA) Support: YES *** Access Point Mode (AP) Support: YES eth0: PRI 31 variant 2 version 9.48 eth0: NIC 5 variant 2 version 1.02 eth0: Wireless, io_addr 0x100, irq 11, mac_address 00:02:2D:26:95:6C Yenta: ISA IRQ mask 0x04b8, PCI irq 11 Socket status: 30000007 ACPI: AC Adapter [ADP1] (on-line) ACPI: Battery Slot [BAT1] (battery present) ACPI: Battery Slot [BAT2] (battery absent) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Fan [FAN] (off) ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Thermal Zone [THRM] (54 C) toshiba_acpi: Toshiba Laptop ACPI Extras version 0.18 toshiba_acpi: HCI method: \_SB_.VALD.GHCI ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no) Adding 500432k swap on /dev/sda1. Priority:-1 extents:1 across:500432k loop: loaded (max 8 devices) NET: Registered protocol family 23 IrCOMM protocol (Dag Brattli) CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 process `syslogd' is using obsolete setsockopt SO_BSDCOMPAT ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 NET: Registered protocol family 17 e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 e100: eth0: e100_probe: addr 0xf7efd000, irq 11, MAC addr 00:00:39:D7:14:A1 eth1: PRI 31 variant 2 version 9.48 eth1: NIC 5 variant 2 version 1.02 eth1: PRI 31 variant 2 version 9.48 eth1: NIC 5 variant 2 version 1.02 eth1: PRI 31 variant 2 version 9.48 eth1: NIC 5 variant 2 version 1.02 squashfs: version 3.0 (2006/03/15) Phillip Lougher, LZMA support by Andrey Borzenkov based on work of McMCC pccard: card ejected from slot 0 Stopping tasks: ==============================================================================| pnp: Device 00:09 disabled. Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. BUG: sleeping function called from invalid context at include2/asm/semaphore.h:99 in_atomic():0, irqs_disabled():1 show_trace+0xd/0x10 dump_stack+0x17/0x20 __might_sleep+0xa8/0xc0 acpi_os_wait_semaphore+0x65/0xbb acpi_ut_acquire_mutex+0x35/0x73 acpi_set_register+0x5a/0x16e acpi_clear_event+0x25/0x2b acpi_pm_enter+0x93/0xb8 suspend_enter+0x4c/0x60 enter_state+0xc0/0x170 state_store+0xa6/0xb0 subsys_attr_store+0x2b/0x40 sysfs_write_file+0xa3/0x100 vfs_write+0x99/0x160 sys_write+0x3d/0x70 sysenter_past_esp+0x54/0x75 Back to C! BUG: sleeping function called from invalid context at /home/bor/src/linux-git/mm/slab.c:2793 in_atomic():0, irqs_disabled():1 show_trace+0xd/0x10 dump_stack+0x17/0x20 __might_sleep+0xa8/0xc0 kmem_cache_alloc+0x59/0x70 acpi_os_acquire_object+0xe/0x3c acpi_ut_allocate_object_desc_dbg+0x13/0x45 acpi_ut_create_internal_object_dbg+0x18/0x6a acpi_rs_set_srs_method_data+0x3a/0xaa acpi_set_current_resources+0x1b/0x24 acpi_pci_link_set+0xfb/0x174 irqrouter_resume+0x37/0x56 __sysdev_resume+0x14/0x80 sysdev_resume+0x57/0x90 device_power_up+0x8/0x10 suspend_enter+0x53/0x60 enter_state+0xc0/0x170 state_store+0xa6/0xb0 subsys_attr_store+0x2b/0x40 sysfs_write_file+0xa3/0x100 vfs_write+0x99/0x160 sys_write+0x3d/0x70 sysenter_past_esp+0x54/0x75 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11 PM: Writing back config space on device 0000:00:02.0 at offset f (was 500001ff, writing 5000010b) ACPI: PCI Interrupt 0000:00:04.0[A]: no GSI PM: Writing back config space on device 0000:00:06.0 at offset f (was 180201ff, writing 1802010b) PM: Writing back config space on device 0000:00:0a.0 at offset f (was 380801ff, writing 3808010b) PM: Writing back config space on device 0000:00:10.0 at offset 6 (was 50200, writing b0050200) PM: Writing back config space on device 0000:00:10.0 at offset 1 (was 2100003, writing 2100007) ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 pccard: PCMCIA card inserted into slot 0 pcmcia: registering new device pcmcia0.0 eth0: PRI 31 variant 2 version 9.48 eth0: NIC 5 variant 2 version 1.02 eth0: Wireless, io_addr 0x100, irq 11, mac_address 00:02:2D:26:95:6C PM: Writing back config space on device 0000:00:11.0 at offset 1 (was 4900003, writing 4900007) ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PM: Writing back config space on device 0000:00:11.1 at offset 1 (was 4900003, writing 4900007) ACPI: PCI Interrupt 0000:00:11.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 PM: Writing back config space on device 0000:00:12.0 at offset f (was 1ff, writing 10b) PM: Writing back config space on device 0000:01:00.0 at offset f (was 1ff, writing 10b) pnp: Failed to activate device 00:05. pnp: Failed to activate device 00:06. pnp: Device 00:09 activated. usb usb1: root hub lost power or was reset Restarting tasks... done e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 e100: eth0: e100_probe: addr 0xf7efd000, irq 11, MAC addr 00:00:39:D7:14:A1 eth1: PRI 31 variant 2 version 9.48 eth1: NIC 5 variant 2 version 1.02 eth1: PRI 31 variant 2 version 9.48 eth1: NIC 5 variant 2 version 1.02 eth1: PRI 31 variant 2 version 9.48 eth1: NIC 5 variant 2 version 1.02 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 nfsd: last server has exited nfsd: unexporting all filesystems pccard: card ejected from slot 0 Stopping tasks: ===========================================================================| pnp: Device 00:09 disabled. Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. BUG: sleeping function called from invalid context at include2/asm/semaphore.h:99 in_atomic():0, irqs_disabled():1 show_trace+0xd/0x10 dump_stack+0x17/0x20 __might_sleep+0xa8/0xc0 acpi_os_wait_semaphore+0x65/0xbb acpi_ut_acquire_mutex+0x35/0x73 acpi_set_register+0x5a/0x16e acpi_clear_event+0x25/0x2b acpi_pm_enter+0x93/0xb8 suspend_enter+0x4c/0x60 enter_state+0xc0/0x170 state_store+0xa6/0xb0 subsys_attr_store+0x2b/0x40 sysfs_write_file+0xa3/0x100 vfs_write+0x99/0x160 sys_write+0x3d/0x70 sysenter_past_esp+0x54/0x75 Back to C! BUG: sleeping function called from invalid context at /home/bor/src/linux-git/mm/slab.c:2793 in_atomic():0, irqs_disabled():1 show_trace+0xd/0x10 dump_stack+0x17/0x20 __might_sleep+0xa8/0xc0 kmem_cache_alloc+0x59/0x70 acpi_os_acquire_object+0xe/0x3c acpi_ut_allocate_object_desc_dbg+0x13/0x45 acpi_ut_create_internal_object_dbg+0x18/0x6a acpi_rs_set_srs_method_data+0x3a/0xaa acpi_set_current_resources+0x1b/0x24 acpi_pci_link_set+0xfb/0x174 irqrouter_resume+0x37/0x56 __sysdev_resume+0x14/0x80 sysdev_resume+0x57/0x90 device_power_up+0x8/0x10 suspend_enter+0x53/0x60 enter_state+0xc0/0x170 state_store+0xa6/0xb0 subsys_attr_store+0x2b/0x40 sysfs_write_file+0xa3/0x100 vfs_write+0x99/0x160 sys_write+0x3d/0x70 sysenter_past_esp+0x54/0x75 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11 PM: Writing back config space on device 0000:00:02.0 at offset f (was 500001ff, writing 5000010b) ACPI: PCI Interrupt 0000:00:04.0[A]: no GSI PM: Writing back config space on device 0000:00:06.0 at offset f (was 180201ff, writing 1802010b) PM: Writing back config space on device 0000:00:06.0 at offset 1 (was 2900003, writing c2900003) PM: Writing back config space on device 0000:00:0a.0 at offset f (was 380801ff, writing 3808010b) PM: Writing back config space on device 0000:00:10.0 at offset 6 (was 50200, writing b0050200) PM: Writing back config space on device 0000:00:10.0 at offset 1 (was 2100003, writing 2100007) ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 pccard: PCMCIA card inserted into slot 0 pcmcia: registering new device pcmcia0.0 eth0: PRI 31 variant 2 version 9.48 eth0: NIC 5 variant 2 version 1.02 eth0: Wireless, io_addr 0x100, irq 11, mac_address 00:02:2D:26:95:6C PM: Writing back config space on device 0000:00:11.0 at offset 1 (was 4900003, writing 4900007) ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PM: Writing back config space on device 0000:00:11.1 at offset 1 (was 4900003, writing 4900007) ACPI: PCI Interrupt 0000:00:11.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 PM: Writing back config space on device 0000:00:12.0 at offset f (was 1ff, writing 10b) PM: Writing back config space on device 0000:01:00.0 at offset f (was 1ff, writing 10b) pnp: Failed to activate device 00:05. pnp: Failed to activate device 00:06. pnp: Device 00:09 activated. usb usb1: root hub lost power or was reset Restarting tasks...<4>ATA: abnormal status 0x80 on port 0x1F7 ATA: abnormal status 0x80 on port 0x1F7 ATA: abnormal status 0x80 on port 0x1F7 done ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata1.00: (BMDMA stat 0x80) ata1.00: tag 0 cmd 0xca Emask 0x2 stat 0x58 err 0x0 (HSM violation) ata1: soft resetting port ata1.00: configured for UDMA/33 ata1: EH complete SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 e100: eth0: e100_probe: addr 0xf7efd000, irq 11, MAC addr 00:00:39:D7:14:A1 eth1: PRI 31 variant 2 version 9.48 eth1: NIC 5 variant 2 version 1.02 eth1: PRI 31 variant 2 version 9.48 eth1: NIC 5 variant 2 version 1.02 eth1: PRI 31 variant 2 version 9.48 eth1: NIC 5 variant 2 version 1.02 NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (GNU/Linux) iD8DBQFEsJ2jR6LMutpd94wRApJOAKCpyrz4QahyPhsuGx8vz3+FCCXQBACdEuEw Ez9vnlzMjYDBgGDHsstrSeI= =AhoN -----END PGP SIGNATURE-----