mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Julien Cristau <julien.cristau@ens-lyon.org>
To: Grant Grundler <grundler@parisc-linux.org>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	linux-pci@atrey.karlin.mff.cuni.cz
Subject: Re: Linux v2.6.17 - PCI Bus hidden behind transparent bridge
Date: Mon, 17 Jul 2006 18:13:34 +0200	[thread overview]
Message-ID: <20060717161333.GA5204@bryan.is-a-geek.org> (raw)
In-Reply-To: <20060717153128.GA16679@colo.lackof.org>

[-- Attachment #1: Type: text/plain, Size: 2523 bytes --]

On Mon, Jul 17, 2006 at 09:31:28 -0600, Grant Grundler wrote:

> On Mon, Jul 17, 2006 at 04:29:17PM +0200, Julien Cristau wrote:
> > Loading the driver with modprobe doesn't change anything (it just
> > outputs the 'Loaded prism54 driver' line), the device still doesn't
> > appear in lspci or ifconfig -a.
> 
> Uhm, that's a different symptom than "doesn't work" :)
> thanks for clarifying.
> 
Sorry for being unclear in my first mail :/

> Sounds more like a problem with the Cardbus controller not providing
> access to PCI config space, not telling PCI generic code there is a
> PCI bus below it, or something like that.
> 
> Can you post "lspci -vvv -s 02:09" output for 2.6.17 as well?
> I'd like to compare the CardBus bridge config info for both (2:09.0
> and 02:09.1) controllers on both kernel releases.
> 
Here it is:

02:09.0 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus Controller (rev 01)
	Subsystem: Acer Incorporated [ALI] Unknown device 1027
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 168, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at 80101000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
	Memory window 0: 20000000-21fff000 (prefetchable)
	Memory window 1: 26000000-27fff000
	I/O window 0: 00007400-000074ff
	I/O window 1: 00007800-000078ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
	16-bit legacy interface ports at 0001

02:09.1 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus Controller (rev 01)
	Subsystem: Acer Incorporated [ALI] Unknown device 1027
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 168, Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 11
	Region 0: Memory at 80102000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
	Memory window 0: 22000000-23fff000 (prefetchable)
	Memory window 1: 28000000-29fff000
	I/O window 0: 00007c00-00007cff
	I/O window 1: 00001000-000010ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001

Thanks for your help!
Julien

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

      reply	other threads:[~2006-07-17 16:13 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-06-18  1:59 Linux v2.6.17 Linus Torvalds
2006-06-18  2:06 ` Linus Torvalds
2006-06-18  3:30   ` Brice Goglin
2006-06-18  3:47     ` Linus Torvalds
2006-06-19  1:39       ` Petr Baudis
2006-06-18 13:49   ` Adrian Bunk
2006-06-18 16:44     ` Linus Torvalds
2006-06-19 21:25       ` Adrian Bunk
2006-06-19 14:23   ` Mark Lord
2006-06-18 10:54 ` Michael Buesch
2006-06-18 16:47   ` Andre Tomt
2006-06-18 17:05     ` Michael Buesch
2006-07-16 19:34 ` Linux v2.6.17 - PCI Bus hidden behind transparent bridge Julien Cristau
2006-07-17 14:13   ` Grant Grundler
2006-07-17 14:29     ` Julien Cristau
2006-07-17 15:31       ` Grant Grundler
2006-07-17 16:13         ` Julien Cristau [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20060717161333.GA5204@bryan.is-a-geek.org \
    --to=julien.cristau@ens-lyon.org \
    --cc=grundler@parisc-linux.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@atrey.karlin.mff.cuni.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®