From: Nerijus Baliunas <nerijus@users.sourceforge.net>
To: Adam Helms <helms.adam@gmail.com>,
jgarzik@pobox.com, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] SATA: Add PCI-ID
Date: Wed, 19 Jul 2006 15:45:27 +0300 [thread overview]
Message-ID: <20060719125001.24ED7BB06@mx.dtiltas.lt> (raw)
In-Reply-To: <c6e8b8d90607071019o22433ffch9ccc986c27c11ffa@mail.gmail.com>
On Fri, 7 Jul 2006 19:19:23 +0200 Adam Helms <helms.adam@gmail.com> wrote:
> Makes the AHCI driver detect the PCI ID 8086:27c0 (IDE interface:
> Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage
> Controller IDE (rev 01)) as an AHCI chipset.
>
> 8086:27c0 also works with ata_piix but it's much slower. 8086:27c0 is
> shipped with - among others - new HP Proliant servers.
I have Intel d945psn motherboard with this controller. I patched
Fedora 2.6.17-1.2145 kernel with this patch, but I get when booting:
ahci 0000:00:1f.2: version 1.2
ACPI: PCI Interrupt 0000:00:1f:2[B] -> GSI 19 (level, low) -> IRQ 193
ahci: probe of 0000:00:1f.2 failed with error -12
Is it because it has IDE controller too?
dmesg:
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185
ICH7: chipset revision 1
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x40b0-0x40b7, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: ST3120026A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: max request size: 512KiB
Regards,
Nerijus
> Signed-off-by: Adam Helms <helms.adam@gmail.com>
> ---------
>
> --- /usr/src/linux-source-2.6.15/drivers/scsi/ahci.c.orig
> 2006-07-07 19:07:14.000000000 +0200
> +++ /usr/src/linux-source-2.6.15/drivers/scsi/ahci.c 2006-07-07
> 19:07:31.000000000 +0200
> @@ -261,6 +261,8 @@ static const struct pci_device_id ahci_p
> board_ahci }, /* ICH6 */
> { PCI_VENDOR_ID_INTEL, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
> board_ahci }, /* ICH6M */
> + { PCI_VENDOR_ID_INTEL, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
> + board_ahci }, /* ICH7 */
> { PCI_VENDOR_ID_INTEL, 0x27c1, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
> board_ahci }, /* ICH7 */
> { PCI_VENDOR_ID_INTEL, 0x27c5, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
prev parent reply other threads:[~2006-07-19 12:50 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-07-07 17:19 Adam Helms
2006-07-19 12:45 ` Nerijus Baliunas [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060719125001.24ED7BB06@mx.dtiltas.lt \
--to=nerijus@users.sourceforge.net \
--cc=helms.adam@gmail.com \
--cc=jgarzik@pobox.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®