mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Randy.Dunlap" <rdunlap@xenotime.net>
To: Matt LaPlante <kernel1@cyberdogtech.com>
Cc: linux-kernel@vger.kernel.org, trivial@kernel.org
Subject: Re: [PATCH 18-rc2] Fix typos in /Documentation : 'H'-'M'
Date: Mon, 24 Jul 2006 20:46:05 -0700	[thread overview]
Message-ID: <20060724204605.f239956b.rdunlap@xenotime.net> (raw)
In-Reply-To: <20060724192747.da3a9235.kernel1@cyberdogtech.com>

On Mon, 24 Jul 2006 19:27:47 -0400 Matt LaPlante wrote:

> This patch fixes typos in various Documentation txts. The patch addresses some words starting with the letters 'H'-'M'.  
> 
> diff -ru a/Documentation/input/gameport-programming.txt b/Documentation/input/gameport-programming.txt
> --- a/Documentation/input/gameport-programming.txt	2006-06-17 21:49:35.000000000 -0400
> +++ b/Documentation/input/gameport-programming.txt	2006-07-24 19:05:48.000000000 -0400
> @@ -19,7 +19,7 @@
>  
>  If your hardware supports more than one io address, and your driver can
>  choose which one program the hardware to, starting from the more exotic
                   ^insert: to

> -addresses is preferred, because the likelyhood of clashing with the standard
> +addresses is preferred, because the likelihood of clashing with the standard
>  0x201 address is smaller.
>  
>  Eg. if your driver supports addresses 0x200, 0x208, 0x210 and 0x218, then

> diff -ru a/Documentation/sched-design.txt b/Documentation/sched-design.txt
> --- a/Documentation/sched-design.txt	2006-06-17 21:49:35.000000000 -0400
> +++ b/Documentation/sched-design.txt	2006-07-24 19:05:48.000000000 -0400
> @@ -93,7 +93,7 @@
>  Design
>  ======
>  
> -the core of the new scheduler are the following mechanizms:
> +The core of the new scheduler are the following mechanisms:

s/are/contains/

>   - *two*, priority-ordered 'priority arrays' per CPU. There is an 'active'

drop comma

>     array and an 'expired' array. The active array contains all tasks that

> diff -ru a/Documentation/scsi/ibmmca.txt b/Documentation/scsi/ibmmca.txt
> --- a/Documentation/scsi/ibmmca.txt	2006-06-17 21:49:35.000000000 -0400
> +++ b/Documentation/scsi/ibmmca.txt	2006-07-24 19:05:48.000000000 -0400
> @@ -229,7 +229,7 @@
>  
>     In a second step of the driver development, the following improvement has
>     been applied: The first approach limited the number of devices to 7, far
> -   fewer than the 15 that it could usem then it just maped ldn -> 
> +   fewer than the 15 that it could use, then it just mapped ldn -> 
>     (ldn/8,ldn%8) for pun,lun.  We ended up with a real mishmash of puns
>     and luns, but it all seemed to work.
>  
> @@ -254,12 +254,12 @@
>     device to be existant, but it has no ldn assigned, it gets a ldn out of 7 
>     to 14. The numbers are assigned in cyclic order. Therefore it takes 8 
>     dynamical reassignments on the SCSI-devices, until a certain device 
> -   loses its ldn again. This assures, that dynamical remapping is avoided 
> +   loses its ldn again. This assures that dynamical remapping is avoided 
>     during intense I/O between up to 15 SCSI-devices (means pun,lun 
> -   combinations). A further advantage of this method is, that people who
> +   combinations). A further advantage of this method is that people who
>     build their kernel without probing on all luns will get what they expect,
>     because the driver just won't assign everything with lun>0 when 
> -   multpile lun probing is inactive.
> +   multiple lun probing is inactive.
>   
>     2.4 SCSI-Device Order
>     ---------------------
> @@ -1104,7 +1104,7 @@
>  	The parameter 'normal' sets the new industry standard, starting
>  	from pun 0, scanning up to pun 6. This allows you to change your 
>  	opinion still after having already compiled the kernel.
> -     Q: Why I cannot find the IBM MCA SCSI support in the config menue?
> +     Q: Why I cannot find the IBM MCA SCSI support in the config menu?

        Q: Why can I not find ...?
or
        Q: Why can't I find ...?

>       A: You have to activate MCA bus support, first.
>       Q: Where can I find the latest info about this driver?
>       A: See the file MAINTAINERS for the current WWW-address, which offers

Rest look good to me.

Thanks,
---
~Randy

  reply	other threads:[~2006-07-25  3:43 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-07-24 23:27 Matt LaPlante
2006-07-25  3:46 ` Randy.Dunlap [this message]
2006-07-25  5:03   ` Matt LaPlante
2006-07-25  5:15     ` Randy.Dunlap

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20060724204605.f239956b.rdunlap@xenotime.net \
    --to=rdunlap@xenotime.net \
    --cc=kernel1@cyberdogtech.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=trivial@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®