mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Andrew Morton <akpm@osdl.org>
To: Alan Stern <stern@rowland.harvard.edu>
Cc: jesse.brandeburg@gmail.com, linux-kernel@vger.kernel.org,
	torvalds@osdl.org, cpufreq@www.linux.org.uk
Subject: Re: Linux v2.6.18-rc3
Date: Mon, 31 Jul 2006 08:11:12 -0700	[thread overview]
Message-ID: <20060731081112.05427677.akpm@osdl.org> (raw)
In-Reply-To: <Pine.LNX.4.44L0.0607311033310.7225-100000@iolanthe.rowland.org>

On Mon, 31 Jul 2006 10:54:55 -0400 (EDT)
Alan Stern <stern@rowland.harvard.edu> wrote:

> On Sun, 30 Jul 2006, Andrew Morton wrote:
> 
> > On Sun, 30 Jul 2006 21:13:48 -0700
> > "Jesse Brandeburg" <jesse.brandeburg@gmail.com> wrote:
> > 
> > > On 7/29/06, Linus Torvalds <torvalds@osdl.org> wrote:
> > > >
> > > > Ok, this missed a week (it should really have been -rc4, and we should
> > > > have had a -rc3 a week ago), but the fact is, with a lot of people at the
> > > > kernel summit and at OLS, it was so quiet for a week that there simply was
> > > > no point.
> > > 
> > > not sure if this is a regression or not, get this on my IBM thinkpad
> > > T43 when resuming from S3 or from hibernate to disk.
> > > 
> > > acpi acpi: suspend
> > > PM: Entering mem sleep
> > > Intel machine check architecture supported.
> > > Intel machine check reporting enabled on CPU#0.
> > > Back to C!
> > > BUG: sleeping function called from invalid context at kernel/rwsem.c:20
> > > in_atomic():0, irqs_disabled():1
> > >  [<c012d638>] down_read+0x12/0x1f
> > >  [<c012605b>] blocking_notifier_call_chain+0xe/0x29
> > >  [<c029199a>] cpufreq_resume+0x118/0x13f
> > >  [<c0231b68>] __sysdev_resume+0x20/0x53
> > >  [<c0231ca9>] sysdev_resume+0x16/0x47
> > >  [<c0235f93>] device_power_up+0x5/0xa
> > >  [<c013358d>] suspend_enter+0x3b/0x44
> > >  [<c011b644>] printk+0x1b/0x1f
> > >  [<c01336fe>] enter_state+0x168/0x198
> > >  [<c01337b3>] state_store+0x85/0x99
> > >  [<c013372e>] state_store+0x0/0x99
> > >  [<c019047a>] subsys_attr_store+0x1e/0x22
> > >  [<c01906ca>] sysfs_write_file+0xa6/0xcc
> > >  [<c0190624>] sysfs_write_file+0x0/0xcc
> > >  [<c015ae52>] vfs_write+0xa8/0x159
> > >  [<c015b398>] sys_write+0x41/0x67
> > >  [<c0102bc9>] sysenter_past_esp+0x56/0x79
> > > PM: Finishing wakeup.
> > > acpi acpi: resuming
> > > 
> > > full dmesg and .config attached, I can test patches.
> > 
> > I think this is the cpufreq problem wherein it sometimes requires that the
> > notifier chain be traversed from atomic context and at other times it
> > requires that sleeping functions be callable from within the traversal. 
> > IOW: we're screwed whatever type of locking we use on that chain.
> 
> I have looked at that problem more closely, and my earlier understanding
> wasn't quite right.  It's not that the context needs to be atomic at some
> times but not others -- it should always be a process context.  The
> problem is that the suspend and resume traversals are done at a time when
> interrupts need to remain disabled, since cpufreq registers its drivers as
> sysdevs.  (Kind of like SYSTEM_BOOTING, except that system_state isn't set
> to anything special.)  Because the down_read() call that protects the
> notifier chain isn't allowed when interrupts are disabled, the BUG occurs.

So why wouldn't an atomic notifier be suitable?

> > I think Alan is cooking up a scheme wherein we fix this with an srcu-locked
> > notifier chain.  If so, it'd be nice to get that moving along a bit?
> 
> Yes; protecting the notifier chain by SRCU instead of an rwsem will 
> prevent the problem.  It's a trivial change, except for one thing: SRCU 
> structures require initialization at runtime before they can be used.  
> This initialization must be done before any driver tries to register on 
> the cpufreq transition notifier chain.
> 
> If someone could give me a hint where a good place would be to carry out
> the initialization, I'd appreciate it.  Would an initcall be appropriate?  
> And if so, which sort of initcall?  core_initcall?  The only requirement 
> is that alloc_percpu() must be available.
> 

core_initcall() would suit.  That's actually a bit late for this sort of
thing, but we can always add a new section later if it becomes a problem. 
I'd suggest that we ensure that srcu_notifier_chain_register() performs a
reliable BUG() if it gets called too early.



  reply	other threads:[~2006-07-31 15:11 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-07-30  6:27 Linus Torvalds
2006-07-30  8:30 ` Russell King
2006-07-31  8:02   ` Junio C Hamano
2006-07-31  4:13 ` Jesse Brandeburg
2006-07-31  4:27   ` Andrew Morton
2006-07-31 14:54     ` Alan Stern
2006-07-31 15:11       ` Andrew Morton [this message]
2006-07-31 15:59         ` Alan Stern
2006-07-31 20:34         ` Alan Stern
2006-08-02  4:31           ` Jesse Brandeburg
2006-08-02  4:59             ` Andrew Morton
2006-08-02 19:57               ` Jesse Brandeburg
2006-08-02 20:16                 ` Rafael J. Wysocki
2006-08-02 20:23                   ` Russell King
2006-08-02 20:26                     ` Rafael J. Wysocki
2006-08-02 20:32                     ` Dave Jones
2006-08-02 20:58                       ` Russell King
2006-08-02 21:01                         ` Dave Jones
2006-08-02 21:18                         ` Linus Torvalds
2006-08-02 21:38                           ` Russell King
2006-08-02 22:04                             ` Linus Torvalds
2006-08-02 22:05                             ` Russell King
2006-08-02 20:38                 ` [PATCH 1/2] SRCU: report out-of-memory errors Alan Stern
2006-08-02 20:57                   ` Paul E. McKenney
2006-08-02 20:38                 ` [PATCH 2/2] cpufreq: make the transition_notifier chain use SRCU Alan Stern
2006-08-03 15:58 ` Linux v2.6.18-rc3 Avuton Olrich
2006-08-03 16:40   ` Adrian Bunk
2006-07-30 12:21 Hubert Tonneau
2006-07-30  8:43 ` Arjan van de Ven
2006-07-30  8:51 ` Greg KH
2006-07-30 11:10 ` Alistair John Strachan
2006-07-30 12:56 Hubert Tonneau
2006-07-30 13:03 Hubert Tonneau
2006-07-30  9:32 ` Jiri Slaby
2006-07-30  9:42 ` Greg KH
2006-07-30 16:05 Hubert Tonneau
2006-07-30 16:49 Hubert Tonneau
2006-07-30 17:42 Hubert Tonneau
2006-08-02 10:41 ` Takashi Iwai
2006-08-02 18:35 Hubert Tonneau
2006-08-02 14:58 ` Takashi Iwai
2006-08-04 16:37 Hubert Tonneau
2006-08-04 17:52 ` Greg KH
2006-08-04 17:55   ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20060731081112.05427677.akpm@osdl.org \
    --to=akpm@osdl.org \
    --cc=cpufreq@www.linux.org.uk \
    --cc=jesse.brandeburg@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stern@rowland.harvard.edu \
    --cc=torvalds@osdl.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®