From: Heiko Carstens <heiko.carstens@de.ibm.com>
To: Neil Horman <nhorman@tuxdriver.com>
Cc: Andrew Morton <akpm@osdl.org>,
kernel-janitors@lists.osdl.org, linux-kernel@vger.kernel.org,
torvalds@osdl.org, marcel@holtman.org, fpavlic@de.ibm.com,
paulus@au1.ibm.com, bcollins@debian.org, tony.luck@intel.com,
Martin Schwidefsky <schwidefsky@de.ibm.com>
Subject: Re: [KJ] (re) audit return code handling for kernel_thread [1/3]
Date: Mon, 31 Jul 2006 11:17:57 +0200 [thread overview]
Message-ID: <20060731091757.GB9551@osiris.boeblingen.de.ibm.com> (raw)
In-Reply-To: <20060730213936.GA10632@osiris.ibm.com>
On Sun, Jul 30, 2006 at 11:39:36PM +0200, Heiko Carstens wrote:
> > > > --- a/arch/s390/mm/cmm.c
> > > > +++ b/arch/s390/mm/cmm.c
> > > > @@ -161,7 +161,11 @@ cmm_thread(void *dummy)
> > > > static void
> > > > cmm_start_thread(void)
> > > > {
> > > > - kernel_thread(cmm_thread, NULL, 0);
> > > > + if (kernel_thread(cmm_thread, NULL, 0) < 0) {
> > > > + printk(KERN_WARNING "Could not start kernel thread at %s:%d\n",
> > > > + __FUNCTION__,__LINE__);
> > > > + clear_bit(0,&cmm_thread_active);
> > > > + }
> > > > }
> > >
> > > This is OK as far as it goes. But really we should propagate any failure
> > > back up to cmm_init() and fail the whole thing, rather than leaving the
> > > driver hanging around in a loaded-but-useless state.
Updated patch. This time against -mm. And actually it also works unlike
my first patch...
From: Heiko Carstens <heiko.carstens@de.ibm.com>
[patch] s390: fix cmm kernel thread handling.
Convert cmm's usage of kernel_thread to kthread_run. Also create the
cmmthread at module load time, so it is possible to check if creation of
the thread fails.
In addition the cmmthread now gets terminated when the module gets unloaded
instead of leaving a stale kernel thread.
Also check the return values of other registration functions at module load
and handle their return values appropriately.
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
Index: linux-2.6.18-rc2-mm1/arch/s390/mm/cmm.c
===================================================================
--- linux-2.6.18-rc2-mm1.orig/arch/s390/mm/cmm.c 2006-07-31 10:27:31.000000000 +0200
+++ linux-2.6.18-rc2-mm1/arch/s390/mm/cmm.c 2006-07-31 11:09:19.000000000 +0200
@@ -16,6 +16,7 @@
#include <linux/sysctl.h>
#include <linux/ctype.h>
#include <linux/swap.h>
+#include <linux/kthread.h>
#include <asm/pgalloc.h>
#include <asm/uaccess.h>
@@ -46,8 +47,7 @@
static struct cmm_page_array *cmm_timed_page_list;
static DEFINE_SPINLOCK(cmm_lock);
-static unsigned long cmm_thread_active;
-static struct work_struct cmm_thread_starter;
+static struct task_struct *cmm_thread_ptr;
static wait_queue_head_t cmm_thread_wait;
static struct timer_list cmm_timer;
@@ -159,14 +159,12 @@
{
int rc;
- daemonize("cmmthread");
while (1) {
rc = wait_event_interruptible(cmm_thread_wait,
(cmm_pages != cmm_pages_target ||
- cmm_timed_pages != cmm_timed_pages_target));
- if (rc == -ERESTARTSYS) {
- /* Got kill signal. End thread. */
- clear_bit(0, &cmm_thread_active);
+ cmm_timed_pages != cmm_timed_pages_target ||
+ kthread_should_stop()));
+ if (kthread_should_stop() || rc == -ERESTARTSYS) {
cmm_pages_target = cmm_pages;
cmm_timed_pages_target = cmm_timed_pages;
break;
@@ -192,16 +190,8 @@
}
static void
-cmm_start_thread(void)
-{
- kernel_thread(cmm_thread, NULL, 0);
-}
-
-static void
cmm_kick_thread(void)
{
- if (!test_and_set_bit(0, &cmm_thread_active))
- schedule_work(&cmm_thread_starter);
wake_up(&cmm_thread_wait);
}
@@ -445,22 +435,48 @@
static int
cmm_init (void)
{
+ int rc = -ENOMEM;
+
#ifdef CONFIG_CMM_PROC
cmm_sysctl_header = register_sysctl_table(cmm_dir_table, 1);
+ if (!cmm_sysctl_header)
+ goto out;
#endif
#ifdef CONFIG_CMM_IUCV
- smsg_register_callback(SMSG_PREFIX, cmm_smsg_target);
+ rc = smsg_register_callback(SMSG_PREFIX, cmm_smsg_target);
+ if (rc < 0)
+ goto out_smsg;
#endif
- register_oom_notifier(&cmm_oom_nb);
- INIT_WORK(&cmm_thread_starter, (void *) cmm_start_thread, NULL);
+ rc = register_oom_notifier(&cmm_oom_nb);
+ if (rc < 0)
+ goto out_oom_notify;
init_waitqueue_head(&cmm_thread_wait);
init_timer(&cmm_timer);
- return 0;
+ cmm_thread_ptr = kthread_run(cmm_thread, NULL, "cmmthread");
+ rc = IS_ERR(cmm_thread_ptr) ? PTR_ERR(cmm_thread_ptr) : 0;
+ if (!rc)
+ goto out;
+ /*
+ * kthread_create failed. undo all the stuff from above again.
+ */
+ unregister_oom_notifier(&cmm_oom_nb);
+
+out_oom_notify:
+#ifdef CONFIG_CMM_IUCV
+ smsg_unregister_callback(SMSG_PREFIX, cmm_smsg_target);
+out_smsg:
+#endif
+#ifdef CONFIG_CMM_PROC
+ unregister_sysctl_table(cmm_sysctl_header);
+#endif
+out:
+ return rc;
}
static void
cmm_exit(void)
{
+ kthread_stop(cmm_thread_ptr);
unregister_oom_notifier(&cmm_oom_nb);
cmm_free_pages(cmm_pages, &cmm_pages, &cmm_page_list);
cmm_free_pages(cmm_timed_pages, &cmm_timed_pages, &cmm_timed_page_list);
next prev parent reply other threads:[~2006-07-31 9:21 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-07-29 20:11 [KJ] (re) audit return code handling for kernel_thread [0/3] Neil Horman
2006-07-29 20:15 ` [KJ] (re) audit return code handling for kernel_thread [1/3] Neil Horman
2006-07-30 0:03 ` Andrew Morton
2006-07-30 0:48 ` Neil Horman
2006-07-30 21:39 ` Heiko Carstens
2006-07-31 9:17 ` Heiko Carstens [this message]
2006-07-29 20:18 ` [KJ] (re) audit return code handling for kernel_thread [2/3] Neil Horman
2006-07-29 20:20 ` [KJ] (re) audit return code handling for kernel_thread [3/3] Neil Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060731091757.GB9551@osiris.boeblingen.de.ibm.com \
--to=heiko.carstens@de.ibm.com \
--cc=akpm@osdl.org \
--cc=bcollins@debian.org \
--cc=fpavlic@de.ibm.com \
--cc=kernel-janitors@lists.osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtman.org \
--cc=nhorman@tuxdriver.com \
--cc=paulus@au1.ibm.com \
--cc=schwidefsky@de.ibm.com \
--cc=tony.luck@intel.com \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®