From: Dave Hansen <haveblue@us.ibm.com>
To: linux-kernel@vger.kernel.org
Cc: viro@ftp.linux.org.uk, herbert@13thfloor.at, hch@infradead.org,
Dave Hansen <haveblue@us.ibm.com>
Subject: [PATCH 20/28] tricky: elevate write count files are open()ed
Date: Tue, 01 Aug 2006 16:52:55 -0700 [thread overview]
Message-ID: <20060801235255.AC3AABFF@localhost.localdomain> (raw)
In-Reply-To: <20060801235240.82ADCA42@localhost.localdomain>
This is the first really tricky patch in the series. It
elevates the writer count on a mount each time a
non-special file is opened for write.
This is not completely apparent in the patch because the
two if() conditions in may_open() above the
mnt_want_write() call are, combined, equivalent to
special_file().
There is also an elevated count around the vfs_create()
call in open_namei(). The count needs to be kept elevated
all the way into the may_open() call. Otherwise, when the
write is dropped, a ro->rw transisition could occur. This
would lead to having rw access on the newly created file,
while the vfsmount is ro. That is bad.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
---
lxc-dave/fs/file_table.c | 5 ++++-
lxc-dave/fs/namei.c | 22 ++++++++++++++++++----
lxc-dave/ipc/mqueue.c | 3 +++
3 files changed, 25 insertions(+), 5 deletions(-)
diff -puN fs/file_table.c~C-elevate-writers-opens-part1 fs/file_table.c
--- lxc/fs/file_table.c~C-elevate-writers-opens-part1 2006-08-01 16:35:21.000000000 -0700
+++ lxc-dave/fs/file_table.c 2006-08-01 16:35:28.000000000 -0700
@@ -179,8 +179,11 @@ void fastcall __fput(struct file *file)
if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL))
cdev_put(inode->i_cdev);
fops_put(file->f_op);
- if (file->f_mode & FMODE_WRITE)
+ if (file->f_mode & FMODE_WRITE) {
put_write_access(inode);
+ if(!special_file(inode->i_mode))
+ mnt_drop_write(mnt);
+ }
file_kill(file);
file->f_dentry = NULL;
file->f_vfsmnt = NULL;
diff -puN fs/namei.c~C-elevate-writers-opens-part1 fs/namei.c
--- lxc/fs/namei.c~C-elevate-writers-opens-part1 2006-08-01 16:35:27.000000000 -0700
+++ lxc-dave/fs/namei.c 2006-08-01 16:35:28.000000000 -0700
@@ -1539,8 +1539,17 @@ int may_open(struct nameidata *nd, int a
return -EACCES;
flag &= ~O_TRUNC;
- } else if (IS_RDONLY(inode) && (flag & FMODE_WRITE))
- return -EROFS;
+ } else if (flag & FMODE_WRITE) {
+ /*
+ * effectively: !special_file()
+ * balanced by __fput()
+ */
+ error = mnt_want_write(nd->mnt);
+ if (error)
+ return error;
+ if (IS_RDONLY(inode))
+ return -EROFS;
+ }
/*
* An append-only file must be opened in append mode for writing.
*/
@@ -1679,14 +1688,17 @@ do_last:
}
if (IS_ERR(nd->intent.open.file)) {
- mutex_unlock(&dir->d_inode->i_mutex);
error = PTR_ERR(nd->intent.open.file);
- goto exit_dput;
+ goto exit_mutex_unlock;
}
/* Negative dentry, just create the file */
if (!path.dentry->d_inode) {
+ error = mnt_want_write(nd->mnt);
+ if (error)
+ goto exit_mutex_unlock;
error = open_namei_create(nd, &path, flag, mode);
+ mnt_drop_write(nd->mnt);
if (error)
goto exit;
return 0;
@@ -1722,6 +1734,8 @@ ok:
goto exit;
return 0;
+exit_mutex_unlock:
+ mutex_unlock(&dir->d_inode->i_mutex);
exit_dput:
dput_path(&path, nd);
exit:
diff -puN ipc/mqueue.c~C-elevate-writers-opens-part1 ipc/mqueue.c
--- lxc/ipc/mqueue.c~C-elevate-writers-opens-part1 2006-08-01 16:35:15.000000000 -0700
+++ lxc-dave/ipc/mqueue.c 2006-08-01 16:35:28.000000000 -0700
@@ -685,6 +685,9 @@ asmlinkage long sys_mq_open(const char _
goto out;
filp = do_open(dentry, oflag);
} else {
+ error = mnt_want_write(mqueue_mnt);
+ if (error)
+ goto out;
filp = do_create(mqueue_mnt->mnt_root, dentry,
oflag, mode, u_attr);
}
_
next prev parent reply other threads:[~2006-08-01 23:53 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-01 23:52 [PATCH 00/28] Mount writer count and read-only bind mounts (v5) Dave Hansen
2006-08-01 23:52 ` [PATCH 01/28] prepare for write access checks: collapse if() Dave Hansen
2006-08-03 14:32 ` Christoph Hellwig
2006-08-01 23:52 ` [PATCH 02/28] r/o bind mount prepwork: move open_namei()'s vfs_create() Dave Hansen
2006-08-03 14:33 ` Christoph Hellwig
2006-08-01 23:52 ` [PATCH 03/28] unlink: monitor i_nlink Dave Hansen
2006-08-03 14:35 ` Christoph Hellwig
2006-08-01 23:52 ` [PATCH 05/28] monitor zeroing of i_nlink Dave Hansen
2006-08-01 23:52 ` [PATCH 04/28] OCFS2 is screwy Dave Hansen
2006-08-02 2:14 ` Mark Fasheh
2006-08-02 3:19 ` [PATCH 04/28] OCFS2 is (not) screwy Dave Hansen
2006-08-02 3:21 ` [PATCH 04/28] OCFS2 is screwy Dave Hansen
2006-08-02 4:34 ` Mark Fasheh
2006-08-03 0:20 ` Mark Fasheh
2006-08-04 21:01 ` [PATCH] clean up OCFS2 nlink handling Dave Hansen
2006-08-04 21:38 ` Mark Fasheh
2006-08-01 23:52 ` [PATCH 06/28] reintroduce list of vfsmounts over superblock Dave Hansen
2006-08-03 14:39 ` Christoph Hellwig
2006-08-04 21:47 ` Dave Hansen
2006-08-01 23:52 ` [PATCH 07/28] Add vfsmount writer count Dave Hansen
2006-08-01 23:52 ` [PATCH 08/28] record when sb_writer_count elevated for inode Dave Hansen
2006-08-01 23:52 ` [PATCH 09/28] kill open files traverse on remount ro Dave Hansen
2006-08-01 23:52 ` [PATCH 10/28] increment sb writer count when nlink hits zero Dave Hansen
2006-08-01 23:52 ` [PATCH 11/28] elevate writer count for chown and friends Dave Hansen
2006-08-01 23:52 ` [PATCH 12/28] elevate mnt writers for callers of vfs_mkdir() Dave Hansen
2006-08-01 23:52 ` [PATCH 13/28] elevate write count during entire ncp_ioctl() Dave Hansen
2006-08-01 23:52 ` [PATCH 14/28] sys_symlinkat() elevate write count around vfs_symlink() Dave Hansen
2006-08-01 23:52 ` [PATCH 15/28] elevate mount count for extended attributes Dave Hansen
2006-08-01 23:52 ` [PATCH 16/28] sys_linkat(): elevate write count around vfs_link() Dave Hansen
2006-08-01 23:52 ` [PATCH 18/28] unix_find_other() elevate write count for touch_atime() Dave Hansen
2006-08-01 23:52 ` [PATCH 17/28] mount_is_safe(): add comment Dave Hansen
2006-08-01 23:52 ` [PATCH 19/28] elevate write count over calls to vfs_rename() Dave Hansen
2006-08-01 23:52 ` Dave Hansen [this message]
2006-08-01 23:52 ` [PATCH 21/28] elevate writer count for do_sys_truncate() Dave Hansen
2006-08-01 23:52 ` [PATCH 22/28] elevate write count for do_utimes() Dave Hansen
2006-08-01 23:52 ` [PATCH 23/28] elevate write count for do_sys_utime() and touch_atime() Dave Hansen
2006-08-01 23:52 ` [PATCH 24/28] sys_mknodat(): elevate write count for vfs_mknod/create() Dave Hansen
2006-08-01 23:52 ` [PATCH 26/28] do_rmdir(): elevate write count Dave Hansen
2006-08-01 23:52 ` [PATCH 25/28] elevate mnt writers for vfs_unlink() callers Dave Hansen
2006-08-01 23:53 ` [PATCH 27/28] elevate writer count for custom 'struct file' Dave Hansen
2006-08-03 14:42 ` Christoph Hellwig
2006-08-11 20:31 ` Dave Hansen
2006-08-01 23:53 ` [PATCH 28/28] honor r/w changes at do_remount() time Dave Hansen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060801235255.AC3AABFF@localhost.localdomain \
--to=haveblue@us.ibm.com \
--cc=hch@infradead.org \
--cc=herbert@13thfloor.at \
--cc=linux-kernel@vger.kernel.org \
--cc=viro@ftp.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®