From: Jarek Poplawski <jarkao2@o2.pl>
To: linux-kernel@vger.kernel.org
Subject: ATA: abnormal status 0x7F on port 0x142F /2.6.18-rc3
Date: Fri, 4 Aug 2006 10:31:58 +0200 [thread overview]
Message-ID: <20060804083157.GA2756@ff.dom.local> (raw)
Hello,
There is no such message in eg. 2.6.17.7 with similar config.
Some more about the box in my yesterday message with subject:
[ BUG: bad unlock balance detected! ]
Jarek P.
from dmesg:
...
SCSI subsystem initialized
libata version 2.00 loaded.
sata_via 0000:00:0f.0: version 2.0
ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 17
sata_via 0000:00:0f.0: routed to hard irq line 9
sata_via 0000:00:0f.0: enabling SATA channels (0x32)
ata1: SATA max UDMA/133 cmd 0x1430 ctl 0x1426 bmdma 0x1400 irq 17
ata2: SATA max UDMA/133 cmd 0x1428 ctl 0x1422 bmdma 0x1408 irq 17
scsi0 : sata_via
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
input: AT Translated Set 2 keyboard as /class/input/input0
ata1.00: ATA-7, max UDMA/100, 78140160 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/100
scsi1 : sata_via
ata2: SATA link down (SStatus 0 SControl 310)
ATA: abnormal status 0x7F on port 0x142F
Vendor: ATA Model: FUJITSU MHV2040B Rev: 0000
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
sd 0:0:0:0: Attached scsi disk sda
...
reply other threads:[~2006-08-04 8:29 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060804083157.GA2756@ff.dom.local \
--to=jarkao2@o2.pl \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome