From: mchehab@infradead.org
To: linux-kernel@vger.kernel.org
Cc: linux-dvb-maintainer@linuxtv.org,
Yeasah Pell <yeasah@schwide.com>, Yeasah Pell <yeasah@shwide.com>,
Manu Abraham <manu@linuxtv.org>,
Mauro Carvalho Chehab <mchehab@infradead.org>
Subject: [PATCH 13/14] V4L/DVB (4431): Add several error checks to dst
Date: Tue, 08 Aug 2006 18:06:54 -0300 [thread overview]
Message-ID: <20060808210654.PS70850700013@infradead.org> (raw)
In-Reply-To: <20060808210151.PS78629800000@infradead.org>
From: Yeasah Pell <yeasah@schwide.com>
Signed-off-by: Yeasah Pell <yeasah@shwide.com>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
drivers/media/dvb/bt8xx/dst.c | 58 +++++++++++++++++++----------------------
1 files changed, 27 insertions(+), 31 deletions(-)
diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c
index d687a14..06ac899 100644
--- a/drivers/media/dvb/bt8xx/dst.c
+++ b/drivers/media/dvb/bt8xx/dst.c
@@ -393,7 +393,7 @@ static int dst_set_bandwidth(struct dst_
state->bandwidth = bandwidth;
if (state->dst_type != DST_TYPE_IS_TERR)
- return 0;
+ return -EOPNOTSUPP;
switch (bandwidth) {
case BANDWIDTH_6_MHZ:
@@ -462,7 +462,7 @@ static int dst_set_symbolrate(struct dst
state->symbol_rate = srate;
if (state->dst_type == DST_TYPE_IS_TERR) {
- return 0;
+ return -EOPNOTSUPP;
}
dprintk(verbose, DST_INFO, 1, "set symrate %u", srate);
srate /= 1000;
@@ -504,7 +504,7 @@ static int dst_set_symbolrate(struct dst
static int dst_set_modulation(struct dst_state *state, fe_modulation_t modulation)
{
if (state->dst_type != DST_TYPE_IS_CABLE)
- return 0;
+ return -EOPNOTSUPP;
state->modulation = modulation;
switch (modulation) {
@@ -1234,7 +1234,7 @@ int dst_command(struct dst_state *state,
goto error;
}
if (write_dst(state, data, len)) {
- dprintk(verbose, DST_INFO, 1, "Tring to recover.. ");
+ dprintk(verbose, DST_INFO, 1, "Trying to recover.. ");
if ((dst_error_recovery(state)) < 0) {
dprintk(verbose, DST_ERROR, 1, "Recovery Failed.");
goto error;
@@ -1328,15 +1328,13 @@ static int dst_tone_power_cmd(struct dst
{
u8 paket[8] = { 0x00, 0x09, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00 };
- if (state->dst_type == DST_TYPE_IS_TERR)
- return 0;
+ if (state->dst_type != DST_TYPE_IS_SAT)
+ return -EOPNOTSUPP;
paket[4] = state->tx_tuna[4];
paket[2] = state->tx_tuna[2];
paket[3] = state->tx_tuna[3];
paket[7] = dst_check_sum (paket, 7);
- dst_command(state, paket, 8);
-
- return 0;
+ return dst_command(state, paket, 8);
}
static int dst_get_tuna(struct dst_state *state)
@@ -1465,7 +1463,7 @@ static int dst_set_diseqc(struct dvb_fro
u8 paket[8] = { 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf0, 0xec };
if (state->dst_type != DST_TYPE_IS_SAT)
- return 0;
+ return -EOPNOTSUPP;
if (cmd->msg_len > 0 && cmd->msg_len < 5)
memcpy(&paket[3], cmd->msg, cmd->msg_len);
else if (cmd->msg_len == 5 && state->dst_hw_cap & DST_TYPE_HAS_DISEQC5)
@@ -1473,18 +1471,17 @@ static int dst_set_diseqc(struct dvb_fro
else
return -EINVAL;
paket[7] = dst_check_sum(&paket[0], 7);
- dst_command(state, paket, 8);
- return 0;
+ return dst_command(state, paket, 8);
}
static int dst_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
{
- int need_cmd;
+ int need_cmd, retval = 0;
struct dst_state *state = fe->demodulator_priv;
state->voltage = voltage;
if (state->dst_type != DST_TYPE_IS_SAT)
- return 0;
+ return -EOPNOTSUPP;
need_cmd = 0;
@@ -1506,9 +1503,9 @@ static int dst_set_voltage(struct dvb_fr
}
if (need_cmd)
- dst_tone_power_cmd(state);
+ retval = dst_tone_power_cmd(state);
- return 0;
+ return retval;
}
static int dst_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
@@ -1517,7 +1514,7 @@ static int dst_set_tone(struct dvb_front
state->tone = tone;
if (state->dst_type != DST_TYPE_IS_SAT)
- return 0;
+ return -EOPNOTSUPP;
switch (tone) {
case SEC_TONE_OFF:
@@ -1533,9 +1530,7 @@ static int dst_set_tone(struct dvb_front
default:
return -EINVAL;
}
- dst_tone_power_cmd(state);
-
- return 0;
+ return dst_tone_power_cmd(state);
}
static int dst_send_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t minicmd)
@@ -1543,7 +1538,7 @@ static int dst_send_burst(struct dvb_fro
struct dst_state *state = fe->demodulator_priv;
if (state->dst_type != DST_TYPE_IS_SAT)
- return 0;
+ return -EOPNOTSUPP;
state->minicmd = minicmd;
switch (minicmd) {
case SEC_MINI_A:
@@ -1553,9 +1548,7 @@ static int dst_send_burst(struct dvb_fro
state->tx_tuna[3] = 0xff;
break;
}
- dst_tone_power_cmd(state);
-
- return 0;
+ return dst_tone_power_cmd(state);
}
@@ -1608,28 +1601,31 @@ static int dst_read_signal_strength(stru
{
struct dst_state *state = fe->demodulator_priv;
- dst_get_signal(state);
+ int retval = dst_get_signal(state);
*strength = state->decode_strength;
- return 0;
+ return retval;
}
static int dst_read_snr(struct dvb_frontend *fe, u16 *snr)
{
struct dst_state *state = fe->demodulator_priv;
- dst_get_signal(state);
+ int retval = dst_get_signal(state);
*snr = state->decode_snr;
- return 0;
+ return retval;
}
static int dst_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p)
{
+ int retval = -EINVAL;
struct dst_state *state = fe->demodulator_priv;
if (p != NULL) {
- dst_set_freq(state, p->frequency);
+ retval = dst_set_freq(state, p->frequency);
+ if(retval != 0)
+ return retval;
dprintk(verbose, DST_DEBUG, 1, "Set Frequency=[%d]", p->frequency);
if (state->dst_type == DST_TYPE_IS_SAT) {
@@ -1647,10 +1643,10 @@ static int dst_set_frontend(struct dvb_f
dst_set_symbolrate(state, p->u.qam.symbol_rate);
dst_set_modulation(state, p->u.qam.modulation);
}
- dst_write_tuna(fe);
+ retval = dst_write_tuna(fe);
}
- return 0;
+ return retval;
}
static int dst_tune_frontend(struct dvb_frontend* fe,
next prev parent reply other threads:[~2006-08-08 21:11 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-08 21:01 [PATCH 00/14] V4L/DVB updates mchehab
2006-08-08 21:06 ` [PATCH 02/14] V4L/DVB (4371a): Fix V4L1 dependencies on compat_ioctl32 mchehab
2006-08-08 21:06 ` [PATCH 01/14] V4L/DVB (4340): Videodev.h should be included also when V4L1_COMPAT is selected mchehab
2006-08-08 21:06 ` [PATCH 06/14] V4L/DVB (4407): Driver dsbr100 is a radio device, not a video one! mchehab
2006-08-08 21:06 ` [PATCH 04/14] V4L/DVB (4395): Restore compat_ioctl in pwc driver mchehab
2006-08-08 21:06 ` [PATCH 07/14] V4L/DVB (4411): Fix minor errors in build files mchehab
2006-08-08 21:06 ` [PATCH 03/14] V4L/DVB (4371b): Fix V4L1 dependencies at drivers under sound/oss and sound/pci mchehab
2006-08-08 21:54 ` Lee Revell
2006-08-09 12:32 ` Mauro Carvalho Chehab
2006-08-08 21:06 ` [PATCH 05/14] V4L/DVB (4399): Fix a typo that caused some compat stuff to not work mchehab
2006-08-08 21:06 ` [PATCH 08/14] V4L/DVB (4416): Cx25840_read4 has wrong endianness mchehab
2006-08-08 21:06 ` mchehab [this message]
2006-08-08 21:06 ` [PATCH 09/14] V4L/DVB (4418): Fix broken msp3400 module option 'standard' mchehab
2006-08-08 21:06 ` [PATCH 10/14] V4L/DVB (4419): Turn on the Low Noise Amplifier of the Samsung tuners mchehab
2006-08-08 21:06 ` [PATCH 12/14] V4L/DVB (4430): Quickcam_messenger compilation fix mchehab
2006-08-09 0:19 ` Diego Calleja
2006-08-08 21:06 ` [PATCH 11/14] V4L/DVB (4427): Fix V4L1 Compat for VIDIOCGPICT ioctl mchehab
2006-08-08 21:06 ` [PATCH 14/14] V4L/DVB (4485): Fix a warning on PPC64 mchehab
2006-08-08 21:22 ` [PATCH 00/14] V4L/DVB updates Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060808210654.PS70850700013@infradead.org \
--to=mchehab@infradead.org \
--cc=linux-dvb-maintainer@linuxtv.org \
--cc=linux-kernel@vger.kernel.org \
--cc=manu@linuxtv.org \
--cc=yeasah@schwide.com \
--cc=yeasah@shwide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®