From: mikepolniak <mikpolniak@adelphia.net>
To: linux-kernel@vger.kernel.org
Subject: JMicron SATA/IDE and 2.6.18-rc4 fails to detect CDROM
Date: Thu, 17 Aug 2006 10:01:15 -0400 [thread overview]
Message-ID: <20060817140115.GA3808@debamd64> (raw)
Using 2.6.18-rc4 and CONFIG_SCSI_SATA_AHCI=m, fails to detect ide cdrom.
lspci
03:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363
AHCI
Controller (rev02)
and from dmesg|grep -i ide
BIOS-provided physical RAM map:
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Boot video device is 0000:01:00.0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming
33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE
interface ide0...
Probing IDE interface ide1...
If i modprobe ahci dmesg shows:
ahci 0000:03:00.0: version 2.0
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 17 PCI:
Setting latency timer of device 0000:03:00.0 to 64 ahci 0000:03:00.0:
AHCI
0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode ahci 0000:03:00.0:
flags: 64bit ncq pm led clo pmp pio slum part ata5: SATA max UDMA/133 cmd
0xFFFFC2000002C100 ctl 0x0 bmdma 0x0 irq 17 ata6: SATA max UDMA/133 cmd
0xFFFFC2000002C180 ctl 0x0 bmdma 0x0 irq 17 scsi6 : ahci
ata5: SATA link down (SStatus 0 SControl 300) scsi7 : ahci
ata6: SATA link down (SStatus 0 SControl 300)
The BIOS sees the CDROM but it is not detected by ide driver.
next reply other threads:[~2006-08-17 14:01 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-17 14:01 mikepolniak [this message]
2006-08-17 14:04 ` Jeff Garzik
2006-08-17 14:44 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060817140115.GA3808@debamd64 \
--to=mikpolniak@adelphia.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®