From: Jeff Dike <jdike@addtoit.com>
To: akpm@osdl.org
Cc: linux-kernel@vger.kernel.org,
user-mode-linux-devel@lists.sourceforge.net,
76306.1226@compuserve.com, ak@muc.de, jeremy@xensource.com,
rusty@rustcorp.com.au, zach@vmware.com
Subject: [PATCH 1/2] Split i386 and x86_64 ptrace.h
Date: Tue, 12 Sep 2006 11:52:04 -0400 [thread overview]
Message-ID: <200609121552.k8CFq4IE008007@ccure.user-mode-linux.org> (raw)
The use of SEGMENT_RPL_MASK in the i386 ptrace.h introduced by
x86-allow-a-kernel-to-not-be-in-ring-0.patch broke the UML build, as
UML includes the underlying architecture's ptrace.h, but has no easy
access to the x86 segment definitions.
Rather than kludging around this, as in the past, this patch splits
the userspace-usable parts, which are the bits that UML needs, of
ptrace.h into ptrace-abi.h, which is included back into ptrace.h.
Thus, there is no net effect on i386.
As a side-effect, this creates a ptrace header which is close to being
usable in /usr/include.
x86_64 is also treated in this way for consistency. There was some
trailing whitespace there, which is cleaned up.
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Index: linux-2.6.18-mm/include/asm-i386/ptrace-abi.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18-mm/include/asm-i386/ptrace-abi.h 2006-09-11 18:04:30.000000000 -0400
@@ -0,0 +1,39 @@
+#ifndef I386_PTRACE_ABI_H
+#define I386_PTRACE_ABI_H
+
+#define EBX 0
+#define ECX 1
+#define EDX 2
+#define ESI 3
+#define EDI 4
+#define EBP 5
+#define EAX 6
+#define DS 7
+#define ES 8
+#define FS 9
+#define GS 10
+#define ORIG_EAX 11
+#define EIP 12
+#define CS 13
+#define EFL 14
+#define UESP 15
+#define SS 16
+#define FRAME_SIZE 17
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS 12
+#define PTRACE_SETREGS 13
+#define PTRACE_GETFPREGS 14
+#define PTRACE_SETFPREGS 15
+#define PTRACE_GETFPXREGS 18
+#define PTRACE_SETFPXREGS 19
+
+#define PTRACE_OLDSETOPTIONS 21
+
+#define PTRACE_GET_THREAD_AREA 25
+#define PTRACE_SET_THREAD_AREA 26
+
+#define PTRACE_SYSEMU 31
+#define PTRACE_SYSEMU_SINGLESTEP 32
+
+#endif
Index: linux-2.6.18-mm/include/asm-i386/ptrace.h
===================================================================
--- linux-2.6.18-mm.orig/include/asm-i386/ptrace.h 2006-09-11 10:48:33.000000000 -0400
+++ linux-2.6.18-mm/include/asm-i386/ptrace.h 2006-09-11 18:04:20.000000000 -0400
@@ -1,24 +1,7 @@
#ifndef _I386_PTRACE_H
#define _I386_PTRACE_H
-#define EBX 0
-#define ECX 1
-#define EDX 2
-#define ESI 3
-#define EDI 4
-#define EBP 5
-#define EAX 6
-#define DS 7
-#define ES 8
-#define FS 9
-#define GS 10
-#define ORIG_EAX 11
-#define EIP 12
-#define CS 13
-#define EFL 14
-#define UESP 15
-#define SS 16
-#define FRAME_SIZE 17
+#include <asm/ptrace-abi.h>
/* this struct defines the way the registers are stored on the
stack during a system call. */
@@ -43,22 +26,6 @@ struct pt_regs {
int xss;
};
-/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-#define PTRACE_GETREGS 12
-#define PTRACE_SETREGS 13
-#define PTRACE_GETFPREGS 14
-#define PTRACE_SETFPREGS 15
-#define PTRACE_GETFPXREGS 18
-#define PTRACE_SETFPXREGS 19
-
-#define PTRACE_OLDSETOPTIONS 21
-
-#define PTRACE_GET_THREAD_AREA 25
-#define PTRACE_SET_THREAD_AREA 26
-
-#define PTRACE_SYSEMU 31
-#define PTRACE_SYSEMU_SINGLESTEP 32
-
#ifdef __KERNEL__
#include <asm/vm86.h>
Index: linux-2.6.18-mm/include/asm-x86_64/ptrace-abi.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18-mm/include/asm-x86_64/ptrace-abi.h 2006-09-11 18:05:29.000000000 -0400
@@ -0,0 +1,51 @@
+#ifndef _X86_64_PTRACE_ABI_H
+#define _X86_64_PTRACE_ABI_H
+
+#if defined(__ASSEMBLY__) || defined(__FRAME_OFFSETS)
+#define R15 0
+#define R14 8
+#define R13 16
+#define R12 24
+#define RBP 32
+#define RBX 40
+/* arguments: interrupts/non tracing syscalls only save upto here*/
+#define R11 48
+#define R10 56
+#define R9 64
+#define R8 72
+#define RAX 80
+#define RCX 88
+#define RDX 96
+#define RSI 104
+#define RDI 112
+#define ORIG_RAX 120 /* = ERROR */
+/* end of arguments */
+/* cpu exception frame or undefined in case of fast syscall. */
+#define RIP 128
+#define CS 136
+#define EFLAGS 144
+#define RSP 152
+#define SS 160
+#define ARGOFFSET R11
+#endif /* __ASSEMBLY__ */
+
+/* top of stack page */
+#define FRAME_SIZE 168
+
+#define PTRACE_OLDSETOPTIONS 21
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS 12
+#define PTRACE_SETREGS 13
+#define PTRACE_GETFPREGS 14
+#define PTRACE_SETFPREGS 15
+#define PTRACE_GETFPXREGS 18
+#define PTRACE_SETFPXREGS 19
+
+/* only useful for access 32bit programs */
+#define PTRACE_GET_THREAD_AREA 25
+#define PTRACE_SET_THREAD_AREA 26
+
+#define PTRACE_ARCH_PRCTL 30 /* arch_prctl for child */
+
+#endif
Index: linux-2.6.18-mm/include/asm-x86_64/ptrace.h
===================================================================
--- linux-2.6.18-mm.orig/include/asm-x86_64/ptrace.h 2006-09-11 10:48:33.000000000 -0400
+++ linux-2.6.18-mm/include/asm-x86_64/ptrace.h 2006-09-11 18:05:27.000000000 -0400
@@ -1,40 +1,9 @@
#ifndef _X86_64_PTRACE_H
#define _X86_64_PTRACE_H
-#if defined(__ASSEMBLY__) || defined(__FRAME_OFFSETS)
-#define R15 0
-#define R14 8
-#define R13 16
-#define R12 24
-#define RBP 32
-#define RBX 40
-/* arguments: interrupts/non tracing syscalls only save upto here*/
-#define R11 48
-#define R10 56
-#define R9 64
-#define R8 72
-#define RAX 80
-#define RCX 88
-#define RDX 96
-#define RSI 104
-#define RDI 112
-#define ORIG_RAX 120 /* = ERROR */
-/* end of arguments */
-/* cpu exception frame or undefined in case of fast syscall. */
-#define RIP 128
-#define CS 136
-#define EFLAGS 144
-#define RSP 152
-#define SS 160
-#define ARGOFFSET R11
-#endif /* __ASSEMBLY__ */
+#include <asm/ptrace-abi.h>
-/* top of stack page */
-#define FRAME_SIZE 168
-
-#define PTRACE_OLDSETOPTIONS 21
-
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLY__
struct pt_regs {
unsigned long r15;
@@ -45,7 +14,7 @@ struct pt_regs {
unsigned long rbx;
/* arguments: non interrupts/non tracing syscalls only save upto here*/
unsigned long r11;
- unsigned long r10;
+ unsigned long r10;
unsigned long r9;
unsigned long r8;
unsigned long rax;
@@ -54,32 +23,18 @@ struct pt_regs {
unsigned long rsi;
unsigned long rdi;
unsigned long orig_rax;
-/* end of arguments */
+/* end of arguments */
/* cpu exception frame or undefined */
unsigned long rip;
unsigned long cs;
- unsigned long eflags;
- unsigned long rsp;
+ unsigned long eflags;
+ unsigned long rsp;
unsigned long ss;
-/* top of stack page */
+/* top of stack page */
};
#endif
-/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-#define PTRACE_GETREGS 12
-#define PTRACE_SETREGS 13
-#define PTRACE_GETFPREGS 14
-#define PTRACE_SETFPREGS 15
-#define PTRACE_GETFPXREGS 18
-#define PTRACE_SETFPXREGS 19
-
-/* only useful for access 32bit programs */
-#define PTRACE_GET_THREAD_AREA 25
-#define PTRACE_SET_THREAD_AREA 26
-
-#define PTRACE_ARCH_PRCTL 30 /* arch_prctl for child */
-
#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
#define user_mode(regs) (!!((regs)->cs & 3))
#define user_mode_vm(regs) user_mode(regs)
next reply other threads:[~2006-09-12 15:54 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-09-12 15:52 Jeff Dike [this message]
2006-09-13 12:57 ` David Woodhouse
-- strict thread matches above, loose matches on Subject: below --
2006-08-08 20:58 Jeff Dike
2006-08-08 23:33 ` Andi Kleen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200609121552.k8CFq4IE008007@ccure.user-mode-linux.org \
--to=jdike@addtoit.com \
--cc=76306.1226@compuserve.com \
--cc=ak@muc.de \
--cc=akpm@osdl.org \
--cc=jeremy@xensource.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rusty@rustcorp.com.au \
--cc=user-mode-linux-devel@lists.sourceforge.net \
--cc=zach@vmware.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome