Re: un/shared IRQ problem (was: Re: 2.6.18 - another DWARF2)

[Andrew Morton <akpm@osdl.org>]

On Wed, 18 Oct 2006 08:34:31 +0200
Martin Lorenz <martin@lorenz.eu.org> wrote:

> On Tue, Oct 17, 2006 at 11:52:16AM -0700, Jesse Brandeburg wrote:
> > On 10/16/06, Martin Lorenz <martin@lorenz.eu.org> wrote:
> > >just got the following on resume:
> > >
> > >[87026.706000]  [<c0251745>] e1000_open+0xcd/0x1a4
> > >[87026.714000] DWARF2 unwinder stuck at syscall_call+0x7/0xb
> > >[87026.715000] Leftover inexact backtrace:
> > >[87026.715000] e1000: eth0: e1000_request_irq: Unable to allocate interrupt
> > >Error: -16
> > 
> > I'm pretty sure this isn't an e1000 problem.  you need to talk to
> > whoever is maintaining the IRQ subsystem for x86.  E1000 is attempting
> > to register a shared interrupt and someone has already registered that
> > interrupt unshared.
> 
> interestingly though it always involves e1000 when I see dumps like this.
> I already reported more of those :-)
> this one dosen't seem to do any harm to system stability. it occurs on every
> suspend/resume and I can circumvent it by disabling msi
> 
> > 
> > looks like several devices are sharing IRQ 201 (aka GSI 16) and ahci
> > or usb uhci_hcd is likely the problem, or the (acpi) power management
> > subsystem.
> > 
> > Hope this helps get the right people involved.
> 
> thank you

Could we see the /proc/interrupts please, so we can find out where the
clash is happening?