From: Andrew Morton <akpm@osdl.org>
To: Fabio Coatti <cova@ferrara.linux.it>
Cc: linux-kernel@vger.kernel.org, Alan Cox <alan@lxorguk.ukuu.org.uk>,
Jeff Garzik <jeff@garzik.org>, Tejun Heo <htejun@gmail.com>
Subject: Re: SATA ICH5 not detected at boot, mm-kernels
Date: Sun, 5 Nov 2006 16:17:25 -0800 [thread overview]
Message-ID: <20061105161725.1a326135.akpm@osdl.org> (raw)
In-Reply-To: <200611051536.35333.cova@ferrara.linux.it>
On Sun, 5 Nov 2006 15:36:33 +0100
Fabio Coatti <cova@ferrara.linux.it> wrote:
> Hi all; It seems that problems like this has been already reported, but not
> exactly the same, so maybe thsi can add some infos. Otherwise, sorry for the
> noise.
>
> Starting from 2.6.19-rc1-mm1 and up to rc4-mm2, at boot the kernel is unable
> to detect two sata disks, connected to a ICH5 controller. Latest mm working
> kernel seems to be 2.6.18-mm3; 2.6.19-rc4 works just fine.
>
> On rc-4 (vanilla) the log is this:
> Nov 5 13:26:37 kefk libata version 2.00 loaded.
> Nov 5 13:26:37 kefk ata_piix 0000:00:1f.2: version 2.00ac6
> Nov 5 13:26:37 kefk ata_piix 0000:00:1f.2: MAP [ P0 P1 IDE IDE ]
> Nov 5 13:26:37 kefk ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level,
> low) -> IRQ 17
> Nov 5 13:26:37 kefk ata: 0x170 IDE port busy
> Nov 5 13:26:37 kefk ata: conflict with ide1
hm. What does that mean?
> Nov 5 13:26:37 kefk PCI: Setting latency timer of device 0000:00:1f.2 to 64
> Nov 5 13:26:37 kefk ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000
> irq 14
> Nov 5 13:26:37 kefk ata2: DUMMY
> Nov 5 13:26:37 kefk scsi1 : ata_piix
> Nov 5 13:26:37 kefk ata1.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48
> NCQ (depth 0/32)
> Nov 5 13:26:37 kefk ata1.00: ata1: dev 0 multi count 16
> Nov 5 13:26:37 kefk ata1.01: ATA-7, max UDMA/133, 586114704 sectors: LBA48
> NCQ (depth 0/32)
> Nov 5 13:26:37 kefk ata1.01: ata1: dev 1 multi count 16
> Nov 5 13:26:37 kefk ata1.00: configured for UDMA/133
> Nov 5 13:26:37 kefk ata1.01: configured for UDMA/133
>
>
> With -mm kernels, I see only the third disk, but attached to a different
> controller (output from rc4 vanilla):
>
> Nov 5 13:26:37 kefk ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 19 (level,
> low) -> IRQ 18
> Nov 5 13:26:37 kefk ata3: SATA max UDMA/100 cmd 0xF8804080 ctl 0xF880408A
> bmdma 0xF8804000 irq 18
> Nov 5 13:26:37 kefk ata4: SATA max UDMA/100 cmd 0xF88040C0 ctl 0xF88040CA
> bmdma 0xF8804008 irq 18
> Nov 5 13:26:37 kefk scsi3 : sata_sil
> Nov 5 13:26:37 kefk ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> Nov 5 13:26:37 kefk ata3.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48
> NCQ (depth 0/32)
> Nov 5 13:26:37 kefk ata3.00: ata3: dev 0 multi count 0
> Nov 5 13:26:37 kefk ata3.00: configured for UDMA/100
> Nov 5 13:26:37 kefk scsi4 : sata_sil
> Nov 5 13:26:37 kefk ata4: SATA link down (SStatus 0 SControl 310)
> Nov 5 13:26:37 kefk scsi 3:0:0:0: Direct-Access ATA Maxtor 6V320F0
> VA11 PQ: 0 ANSI: 5
> Nov 5 13:26:37 kefk SCSI device sdc: 625142448 512-byte hdwr sectors (320073
> MB)
> Nov 5 13:26:37 kefk sdc: Write Protect is off
>
And why doesn't -mm report the same conflict? I assume the .config is the
same?
next prev parent reply other threads:[~2006-11-06 0:18 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-11-05 14:36 Fabio Coatti
2006-11-06 0:17 ` Andrew Morton [this message]
2006-11-06 12:43 ` Tejun Heo
2006-11-06 13:18 ` Fabio Coatti
2006-11-13 9:17 ` Fabio Coatti
2006-11-13 21:29 ` Andrew Morton
2006-11-14 21:52 ` Fabio Coatti
2006-11-14 22:45 ` Andrew Morton
2006-11-12 11:09 ` Fabio Coatti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061105161725.1a326135.akpm@osdl.org \
--to=akpm@osdl.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=cova@ferrara.linux.it \
--cc=htejun@gmail.com \
--cc=jeff@garzik.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®