From: Jody Belka <lists-lkml@pimb.org>
To: lkml <linux-kernel@vger.kernel.org>,
suspend-devel <suspend-devel@lists.sourceforge.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>, Pavel Machek <pavel@ucw.cz>
Subject: problem after s2ram restore with password-protected hdd
Date: Thu, 16 Nov 2006 13:52:10 +0000 [thread overview]
Message-ID: <20061116135210.GR2808@pimb.org> (raw)
[Please cc me on any reply, as i'm not subscribed]
I tried to use s2ram today on my Dell Inspiron 6000, but i'm having problems
after wake-up when I have the hard drives internal password enabled (the
normal state for this machine). If i turn the password off, everything works
fine. I note that the password screen doesn't appear during wake-up, although
the bios help text implies that it should do.
Well, works fine as long as I follow the advice at en.opensuse.org/S2ram
and don't include vga=795 on the command-line, as I have an ATI Radeon
graphics chipset. annoying, although I am in X usually anyway. Any news on
that front?
J
--
Jody Belka
<knew (at) pimb (dot) org>
uname -a: Linux atlas 2.6.18-rc6-local-evms #1 PREEMPT Tue Sep 12 14:37:12 BST
2006 i686 GNU/Linux
s2ram -i:
=====================
This machine can be identified by:
sys_vendor = "Dell Inc."
sys_product = "Inspiron 6000 "
sys_version = ""
bios_version = "A09"
See http://en.opensuse.org/S2ram for details.
If you report a problem, please include the complete output above.
=====================
netconsole log (trimmed, it went on for 8 megs):
[ 203.368000] netconsole: network logging started
<<< s2ram >>>
[ 217.372000] Stopping tasks: ========================================================|
<<< wake-up >>>
[ 231.680000] ata2.00: configured for UDMA/33
[ 231.712000] ata1.00: configured for UDMA/100
[ 231.712000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[ 231.712000] sda: Write Protect is off
[ 231.712000] SCSI device sda: drive cache: write back
[ 233.200000] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 233.200000] b44: eth0: Flow control is off for TX and off for RX.
<<< at this point I triggered some disk activity with a 'ls /' >>>
[ 243.412000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 243.412000] ata1.00: (BMDMA stat 0x0)
[ 243.412000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 243.416000] ata1: EH complete
[ 243.416000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 243.416000] ata1.00: (BMDMA stat 0x0)
[ 243.416000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 243.416000] ata1: EH complete
[ 243.416000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 243.416000] ata1.00: (BMDMA stat 0x0)
[ 243.416000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 243.416000] ata1: EH complete
[ 243.420000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 243.420000] ata1.00: (BMDMA stat 0x0)
[ 243.420000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 243.420000] ata1: EH complete
[ 243.420000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 243.420000] ata1.00: (BMDMA stat 0x0)
[ 243.420000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 243.420000] ata1: EH complete
[ 243.420000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 243.420000] ata1.00: (BMDMA stat 0x0)
[ 243.420000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 243.424000] sd 0:0:0:0: SCSI error: return code = 0x08000002
[ 243.424000] sda: Current: sense key: Aborted Command
[ 243.424000] Additional sense: No additional sense information
[ 243.424000] end_request: I/O error, dev sda, sector 39892208
[ 243.424000] device-mapper: bbr: dm-bbr: device 254:0: I/O failure on sector 39619103. Scheduling for retry.
[ 243.424000] ata1: EH complete
[ 243.424000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[ 243.424000] sda: Write Protect is off
[ 243.428000] SCSI device sda: drive cache: write back
[ 243.428000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[ 243.428000] sda: Write Protect is off
[ 243.428000] SCSI device sda: drive cache: write back
[ 243.436000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 243.436000] ata1.00: (BMDMA stat 0x0)
[ 243.436000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 243.436000] ata1: EH complete
[ 243.436000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 243.436000] ata1.00: (BMDMA stat 0x0)
[ 243.436000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 243.436000] ata1: EH complete
[ 243.436000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 243.436000] ata1.00: (BMDMA stat 0x0)
[ 243.436000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 243.440000] ata1: EH complete
[ 243.440000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 243.440000] ata1.00: (BMDMA stat 0x0)
[ 243.440000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 243.440000] ata1: EH complete
[ 243.440000] ata1.00: limiting speed to UDMA/66
[ 243.440000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 243.440000] ata1.00: (BMDMA stat 0x0)
[ 243.440000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 243.440000] ata1: soft resetting port
[ 243.596000] ata1.00: configured for UDMA/66
[ 243.596000] ata1: EH complete
[ 243.596000] ata1.00: limiting speed to UDMA/44
[ 243.596000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 243.596000] ata1.00: (BMDMA stat 0x0)
[ 243.596000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 243.600000] ata1: soft resetting port
[ 243.756000] ata1.00: configured for UDMA/44
[ 243.756000] sd 0:0:0:0: SCSI error: return code = 0x08000002
[ 243.756000] sda: Current: sense key: Aborted Command
[ 243.756000] Additional sense: No additional sense information
[ 243.756000] end_request: I/O error, dev sda, sector 39892208
[ 243.756000] ata1: EH complete
[ 243.760000] ata1.00: limiting speed to UDMA/33
[ 243.760000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 243.760000] ata1.00: (BMDMA stat 0x0)
[ 243.760000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 243.760000] ata1: soft resetting port
[ 243.916000] ata1.00: configured for UDMA/33
[ 243.916000] ata1: EH complete
[ 243.916000] ata1.00: limiting speed to UDMA/25
[ 243.916000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 243.916000] ata1.00: (BMDMA stat 0x0)
[ 243.916000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 243.916000] ata1: soft resetting port
[ 244.072000] ata1.00: configured for UDMA/25
[ 244.072000] ata1: EH complete
[ 244.072000] ata1.00: limiting speed to UDMA/16
[ 244.072000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 244.072000] ata1.00: (BMDMA stat 0x0)
[ 244.072000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 244.076000] ata1: soft resetting port
[ 244.232000] ata1.00: configured for UDMA/16
[ 244.232000] ata1: EH complete
[ 244.232000] ata1.00: limiting speed to PIO4
[ 244.232000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 244.232000] ata1.00: (BMDMA stat 0x0)
[ 244.232000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 244.232000] ata1: soft resetting port
[ 244.388000] ata1.00: configured for PIO4
[ 244.388000] ata1: EH complete
[ 244.392000] ata1.00: limiting speed to PIO3
[ 244.392000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 244.392000] ata1.00: tag 0 cmd 0x20 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 244.392000] ata1: soft resetting port
[ 244.548000] ata1.00: configured for PIO3
[ 244.548000] ata1: EH complete
[ 244.548000] ata1.00: limiting speed to PIO2
[ 244.548000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 244.548000] ata1.00: tag 0 cmd 0x20 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 244.548000] ata1: soft resetting port
[ 244.708000] ata1.00: configured for PIO2
[ 244.708000] sd 0:0:0:0: SCSI error: return code = 0x08000002
[ 244.708000] sda: Current: sense key: Aborted Command
[ 244.708000] Additional sense: No additional sense information
[ 244.708000] end_request: I/O error, dev sda, sector 39892208
[ 244.708000] ata1: EH complete
[ 244.708000] device-mapper: bbr: dm-bbr: device 254:0: Trying to remap bad sector 39619103 to sector 137
[ 244.708000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[ 244.712000] ata1.00: limiting speed to PIO1
[ 244.712000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 244.712000] ata1.00: tag 0 cmd 0x20 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 244.712000] ata1: soft resetting port
[ 244.868000] ata1.00: configured for PIO1
[ 244.868000] ata1: EH complete
[ 244.868000] ata1.00: limiting speed to PIO0
[ 244.868000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 244.868000] ata1.00: tag 0 cmd 0x20 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 244.872000] ata1: soft resetting port
[ 245.028000] ata1.00: configured for PIO0
[ 245.028000] ata1: EH complete
[ 245.032000] ata1.00: speed down requested but no transfer mode left
[ 245.032000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 245.032000] ata1.00: tag 0 cmd 0x20 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 245.032000] ata1: EH complete
[ 245.032000] ata1.00: speed down requested but no transfer mode left
[ 245.032000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 245.032000] ata1.00: tag 0 cmd 0x20 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 245.032000] ata1: EH complete
[ 245.032000] ata1.00: speed down requested but no transfer mode left
[ 245.032000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 245.032000] ata1.00: tag 0 cmd 0x20 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 245.036000] ata1: EH complete
[ 245.036000] ata1.00: speed down requested but no transfer mode left
[ 245.036000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 245.036000] ata1.00: tag 0 cmd 0x20 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 245.036000] sd 0:0:0:0: SCSI error: return code = 0x08000002
[ 245.036000] sda: Current: sense key: Aborted Command
[ 245.036000] Additional sense: No additional sense information
[ 245.036000] end_request: I/O error, dev sda, sector 273242
[ 245.036000] ata1: EH complete
next reply other threads:[~2006-11-16 13:29 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-11-16 13:52 Jody Belka [this message]
2006-11-16 13:53 ` [Suspend-devel] " Rafael J. Wysocki
2006-11-16 14:31 ` Jody Belka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061116135210.GR2808@pimb.org \
--to=lists-lkml@pimb.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=rjw@sisk.pl \
--cc=suspend-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®