From: Karsten Wiese <fzu@wemgehoertderstaat.de>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org, Ingo Molnar <mingo@elte.hu>,
Stephen Hemminger <shemminger@osdl.org>,
"Rafael J. Wysocki" <rjw@sisk.pl>
Subject: [PATCH] Regard MSRs in lapic_suspend()/lapic_resume()
Date: Sat, 18 Nov 2006 03:00:18 +0100 [thread overview]
Message-ID: <200611180300.18581.fzu@wemgehoertderstaat.de> (raw)
Read/Write APIC_LVTPC and APIC_LVTTHMR only,
if get_maxlvt() returns certain values.
This is done like everywhere else in i386/kernel/apic.c,
so I guess its correct.
Suspends/Resumes to disk fine and eleminates an smp_error_interrupt()
here on a K8.
Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
---
arch/i386/kernel/apic.c | 22 ++++++++++++++++++----
1 files changed, 18 insertions(+), 4 deletions(-)
diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c
index 2fd4b7d..776d9be 100644
--- a/arch/i386/kernel/apic.c
+++ b/arch/i386/kernel/apic.c
@@ -647,23 +647,30 @@ static struct {
static int lapic_suspend(struct sys_device *dev, pm_message_t state)
{
unsigned long flags;
+ int maxlvt;
if (!apic_pm_state.active)
return 0;
+ maxlvt = get_maxlvt();
+
apic_pm_state.apic_id = apic_read(APIC_ID);
apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI);
apic_pm_state.apic_ldr = apic_read(APIC_LDR);
apic_pm_state.apic_dfr = apic_read(APIC_DFR);
apic_pm_state.apic_spiv = apic_read(APIC_SPIV);
apic_pm_state.apic_lvtt = apic_read(APIC_LVTT);
- apic_pm_state.apic_lvtpc = apic_read(APIC_LVTPC);
+ if (maxlvt >= 4)
+ apic_pm_state.apic_lvtpc = apic_read(APIC_LVTPC);
apic_pm_state.apic_lvt0 = apic_read(APIC_LVT0);
apic_pm_state.apic_lvt1 = apic_read(APIC_LVT1);
apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR);
apic_pm_state.apic_tmict = apic_read(APIC_TMICT);
apic_pm_state.apic_tdcr = apic_read(APIC_TDCR);
- apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
+#ifdef CONFIG_X86_MCE_P4THERMAL
+ if (maxlvt >= 5)
+ apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
+#endif
local_irq_save(flags);
disable_local_APIC();
@@ -675,10 +682,13 @@ static int lapic_resume(struct sys_devic
{
unsigned int l, h;
unsigned long flags;
+ int maxlvt;
if (!apic_pm_state.active)
return 0;
+ maxlvt = get_maxlvt();
+
local_irq_save(flags);
/*
@@ -700,8 +710,12 @@ static int lapic_resume(struct sys_devic
apic_write(APIC_SPIV, apic_pm_state.apic_spiv);
apic_write(APIC_LVT0, apic_pm_state.apic_lvt0);
apic_write(APIC_LVT1, apic_pm_state.apic_lvt1);
- apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr);
- apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc);
+#ifdef CONFIG_X86_MCE_P4THERMAL
+ if (maxlvt >= 5)
+ apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr);
+#endif
+ if (maxlvt >= 4)
+ apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc);
apic_write(APIC_LVTT, apic_pm_state.apic_lvtt);
apic_write(APIC_TDCR, apic_pm_state.apic_tdcr);
apic_write(APIC_TMICT, apic_pm_state.apic_tmict);
--
1.4.2.4
next reply other threads:[~2006-11-18 2:00 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-11-18 2:00 Karsten Wiese [this message]
2006-11-18 7:03 ` Ingo Molnar
2006-11-18 7:22 ` Ingo Molnar
2006-11-18 14:46 ` Ingo Molnar
2006-11-19 7:59 ` Andi Kleen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200611180300.18581.fzu@wemgehoertderstaat.de \
--to=fzu@wemgehoertderstaat.de \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=rjw@sisk.pl \
--cc=shemminger@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®