[PATCH 2.6.19] bonding: incorrect bonding state reported via ioctl

[Andy Gospodarek <andy@greyhouse.net>]

This is a small fix-up to finish out the work done by Jay Vosburgh to
add carrier-state support for bonding devices.  The output in
/proc/net/bonding/bondX was correct, but when collecting the same info
via an iotcl it could still be incorrect.

Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
---

 bond_main.c |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3547,7 +3547,7 @@ static int bond_do_ioctl(struct net_devi
 			mii->val_out = 0;
 			read_lock_bh(&bond->lock);
 			read_lock(&bond->curr_slave_lock);
-			if (bond->curr_active_slave) {
+			if (netif_carrier_ok(bond->dev)) {
 				mii->val_out = BMSR_LSTATUS;
 			}
 			read_unlock(&bond->curr_slave_lock);