From: Avi Kivity <avi@qumranet.com>
To: kvm-devel@lists.sourceforge.net
Cc: linux-kernel@vger.kernel.org, akpm@osdl.org
Subject: [PATCH 19/38] KVM: Make __set_efer() an arch operation
Date: Mon, 27 Nov 2006 12:29:38 -0000 [thread overview]
Message-ID: <20061127122938.0518325015E@cleopatra.q> (raw)
In-Reply-To: <456AD5C6.1090406@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Index: linux-2.6/drivers/kvm/kvm.h
===================================================================
--- linux-2.6.orig/drivers/kvm/kvm.h
+++ linux-2.6/drivers/kvm/kvm.h
@@ -271,6 +271,7 @@ struct kvm_arch_ops {
struct kvm_segment *var, int seg);
void (*set_cr0)(struct kvm_vcpu *vcpu, unsigned long cr0);
void (*set_cr4)(struct kvm_vcpu *vcpu, unsigned long cr4);
+ void (*set_efer)(struct kvm_vcpu *vcpu, u64 efer);
void (*get_idt)(struct kvm_vcpu *vcpu, struct descriptor_table *dt);
void (*set_idt)(struct kvm_vcpu *vcpu, struct descriptor_table *dt);
void (*get_gdt)(struct kvm_vcpu *vcpu, struct descriptor_table *dt);
@@ -339,8 +340,6 @@ void set_cr4(struct kvm_vcpu *vcpu, unsi
void set_cr8(struct kvm_vcpu *vcpu, unsigned long cr0);
void lmsw(struct kvm_vcpu *vcpu, unsigned long msw);
-void __set_efer(struct kvm_vcpu *vcpu, u64 efer);
-
void inject_gp(struct kvm_vcpu *vcpu);
#ifdef __x86_64__
Index: linux-2.6/drivers/kvm/kvm_main.c
===================================================================
--- linux-2.6.orig/drivers/kvm/kvm_main.c
+++ linux-2.6/drivers/kvm/kvm_main.c
@@ -525,31 +525,6 @@ void guest_write_tsc(u64 guest_tsc)
}
EXPORT_SYMBOL_GPL(guest_write_tsc);
-#ifdef __x86_64__
-
-void __set_efer(struct kvm_vcpu *vcpu, u64 efer)
-{
- struct vmx_msr_entry *msr = find_msr_entry(vcpu, MSR_EFER);
-
- vcpu->shadow_efer = efer;
- if (efer & EFER_LMA) {
- vmcs_write32(VM_ENTRY_CONTROLS,
- vmcs_read32(VM_ENTRY_CONTROLS) |
- VM_ENTRY_CONTROLS_IA32E_MASK);
- msr->data = efer;
-
- } else {
- vmcs_write32(VM_ENTRY_CONTROLS,
- vmcs_read32(VM_ENTRY_CONTROLS) &
- ~VM_ENTRY_CONTROLS_IA32E_MASK);
-
- msr->data = efer & ~EFER_LME;
- }
-}
-EXPORT_SYMBOL_GPL(__set_efer);
-
-#endif
-
static int pdptrs_have_reserved_bits_set(struct kvm_vcpu *vcpu,
unsigned long cr3)
{
@@ -1602,7 +1577,7 @@ static int kvm_dev_ioctl_set_sregs(struc
mmu_reset_needed |= vcpu->shadow_efer != sregs->efer;
#ifdef __x86_64__
- __set_efer(vcpu, sregs->efer);
+ kvm_arch_ops->set_efer(vcpu, sregs->efer);
#endif
vcpu->apic_base = sregs->apic_base;
Index: linux-2.6/drivers/kvm/vmx.c
===================================================================
--- linux-2.6.orig/drivers/kvm/vmx.c
+++ linux-2.6/drivers/kvm/vmx.c
@@ -553,6 +553,30 @@ static void vmx_set_cr4(struct kvm_vcpu
vcpu->cr4 = cr4;
}
+#ifdef __x86_64__
+
+static void vmx_set_efer(struct kvm_vcpu *vcpu, u64 efer)
+{
+ struct vmx_msr_entry *msr = find_msr_entry(vcpu, MSR_EFER);
+
+ vcpu->shadow_efer = efer;
+ if (efer & EFER_LMA) {
+ vmcs_write32(VM_ENTRY_CONTROLS,
+ vmcs_read32(VM_ENTRY_CONTROLS) |
+ VM_ENTRY_CONTROLS_IA32E_MASK);
+ msr->data = efer;
+
+ } else {
+ vmcs_write32(VM_ENTRY_CONTROLS,
+ vmcs_read32(VM_ENTRY_CONTROLS) &
+ ~VM_ENTRY_CONTROLS_IA32E_MASK);
+
+ msr->data = efer & ~EFER_LME;
+ }
+}
+
+#endif
+
static u64 vmx_get_segment_base(struct kvm_vcpu *vcpu, int seg)
{
struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg];
@@ -882,7 +906,7 @@ static int vmx_vcpu_setup(struct kvm_vcp
vmx_set_cr0(vcpu, vcpu->cr0); // enter rmode
vmx_set_cr4(vcpu, 0);
#ifdef __x86_64__
- __set_efer(vcpu, 0);
+ vmx_set_efer(vcpu, 0);
#endif
return 0;
@@ -1606,6 +1630,7 @@ static struct kvm_arch_ops vmx_arch_ops
.set_segment = vmx_set_segment,
.set_cr0 = vmx_set_cr0,
.set_cr4 = vmx_set_cr4,
+ .set_efer = vmx_set_efer,
.get_idt = vmx_get_idt,
.set_idt = vmx_set_idt,
.get_gdt = vmx_get_gdt,
next prev parent reply other threads:[~2006-11-27 12:29 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-11-27 12:10 [PATCH 0/38] KVM: Decouple Intel VT implementation from base kvm Avi Kivity
2006-11-27 12:11 ` [PATCH 1/38] KVM: Create kvm-intel.ko module Avi Kivity
2006-11-27 12:36 ` Ingo Molnar
2006-11-30 14:24 ` Christoph Hellwig
2006-11-30 15:44 ` Ingo Molnar
2006-11-30 19:59 ` Andrew Morton
2006-11-30 20:19 ` Ingo Molnar
2006-11-30 20:24 ` Christoph Hellwig
2006-11-30 20:31 ` Ingo Molnar
2006-11-27 12:12 ` [PATCH 2/38] KVM: Make /dev/registration happen when the arch specific module is loaded Avi Kivity
2006-11-27 12:13 ` [PATCH 0/38] KVM: Decouple Intel VT implementation from base kvm Avi Kivity
2006-11-27 12:13 ` [PATCH 3/38] KV: Make hardware detection an arch operation Avi Kivity
2006-11-27 12:14 ` [PATCH 4/38] KVM: Make the per-cpu enable/disable functions arch operations Avi Kivity
2006-11-27 12:15 ` [PATCH 5/38] KVM: Make the hardware setup operations (non-percpu) " Avi Kivity
2006-11-27 12:16 ` [PATCH 6/38] KVM: Make the guest debugger an arch operation Avi Kivity
2006-11-27 12:17 ` [PATCH 7/38] KVM: Make msr accessors arch operations Avi Kivity
2006-11-27 12:18 ` [PATCH 8/38] KVM: Make the segment " Avi Kivity
2006-11-27 12:19 ` [PATCH 9/38] KVM: Cache guest cr4 in vcpu structure Avi Kivity
2006-11-27 12:20 ` [PATCH 10/38] KVM: Cache guest cr0 " Avi Kivity
2006-11-27 12:21 ` [PATCH 11/38] KVM: Add get_segment_base() arch accessor Avi Kivity
2006-11-27 12:22 ` [PATCH 12/38] KVM: Add idt and gdt descriptor accessors Avi Kivity
2006-11-27 12:23 ` [PATCH 13/38] KVM: Make syncing the register file to the vcpu structure an arch operation Avi Kivity
2006-11-27 12:24 ` [PATCH 14/38] KVM: Make the vcpu execution loop " Avi Kivity
2006-11-27 12:25 ` [PATCH 15/38] KVM: Move the vmx exit handlers to vmx.c Avi Kivity
2006-11-27 12:26 ` [PATCH 16/38] KVM: Make vcpu_setup() an arch operation Avi Kivity
2006-11-27 12:27 ` [PATCH 17/38] KVM: Make __set_cr0() (and dependencies) arch operations Avi Kivity
2006-11-27 12:28 ` [PATCH 18/38] KVM: Make __set_cr4() an arch operation Avi Kivity
2006-11-27 12:29 ` Avi Kivity [this message]
2006-11-27 13:39 ` [PATCH 19/38] KVM: Make __set_efer() " Christoph Hellwig
2006-11-27 13:46 ` Avi Kivity
2006-11-27 12:30 ` [PATCH 20/38] KVM: Make set_cr3() and tlb flushing arch operations Avi Kivity
2006-11-27 12:31 ` [PATCH 21/38] KVM: Make inject_page_fault() an arch operation Avi Kivity
2006-11-27 12:32 ` [PATCH 22/38] KVM: Make inject_gp() " Avi Kivity
2006-11-27 12:33 ` [PATCH 23/38] KVM: Use the idt and gdt accessors in realmode emulation Avi Kivity
2006-11-27 12:34 ` [PATCH 24/38] KVM: Use the general purpose register accessors rather than direct access Avi Kivity
2006-11-27 12:35 ` [PATCH 25/38] KVM: Move the vmx tsc accessors to vmx.c Avi Kivity
2006-11-27 12:36 ` [PATCH 26/38] KVM: Access rflags through an arch operation Avi Kivity
2006-11-27 12:37 ` [PATCH 27/38] KVM: Move the vmx segment field definitions to vmx.c Avi Kivity
2006-11-27 12:38 ` [PATCH 28/38] KVM: Add an arch accessor for cs d/b and l bits Avi Kivity
2006-11-27 12:39 ` [PATCH 29/38] KVM: Add a set_cr0_no_modeswitch() arch accessor Avi Kivity
2006-11-27 12:40 ` [PATCH 30/38] KVM: Make vcpu_load() and vcpu_put() arch operations Avi Kivity
2006-11-27 12:41 ` [PATCH 31/38] KVM: Make vcpu creation and destruction " Avi Kivity
2006-11-27 12:42 ` [PATCH 32/38] KVM: Move vmcs static variables to vmx.c Avi Kivity
2006-11-27 12:43 ` [PATCH 33/38] KVM: Make is_long_mode() an arch operation Avi Kivity
2006-11-27 12:44 ` [PATCH 34/38] KVM: Use the tlb flush arch operation instead of an inline Avi Kivity
2006-11-27 12:45 ` [PATCH 35/38] KVM: Remove guest_cpl() Avi Kivity
2006-11-27 12:46 ` [PATCH 36/38] KVM: Move vmcs accessors to vmx.c Avi Kivity
2006-11-27 12:47 ` [PATCH 37/38] KVM: Move vmx helper inlines " Avi Kivity
2006-11-27 12:48 ` [PATCH 38/38] KVM: Remove vmx includes from arch independent code Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061127122938.0518325015E@cleopatra.q \
--to=avi@qumranet.com \
--cc=akpm@osdl.org \
--cc=kvm-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®