mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jun Sun <jsun@junsun.net>
To: "linux-os (Dick Johnson)" <linux-os@analogic.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: failed 'ljmp' in linear addressing mode
Date: Mon, 27 Nov 2006 15:16:46 -0800	[thread overview]
Message-ID: <20061127231646.GA21627@srv.junsun.net> (raw)
In-Reply-To: <Pine.LNX.4.61.0611270843500.4092@chaos.analogic.com>


On Mon, Nov 27, 2006 at 08:58:57AM -0500, linux-os (Dick Johnson) wrote:
> 
> I think it probably resets the instant that you turn off paging. To
> turn off paging, you need to copy some code (properly linked) to an
> area where there is a 1:1 mapping between virtual and physical addresses.
> A safe place is somewhere below 1 megabyte. Then you need to set up a
> call descriptor so you can call that code (you can ljump if you never
> plan to get back). You then need to clear interrupts on all CPUs (use a 
> spin-lock). Once you are executing from the new area, you reset your
> segments to the new area. The call descriptor would have already set
> CS, as would have the long-jump. At this time you can turn off paging
> and flush the TLB. You are now in linear-address protected mode.
>

Thanks for the reply.  But I am pretty much sure I did above correctly.
I use single-instruction infinite loop in the call path to verify
that control does reach last 'ljmp' but not the jump destination.

Below is the hack I made to machine_kexec.c file.  As you can see, I
managed to make the identical mapping between virtual and physical addresses.

Note I did not copy the code into the first 1M.  In fact the code
is located at 0xc0477000 (0x00477000 in physical).  I thought that should be
OK as I did not really go all the way back to real-address mode.

That last suspect I have now is the wrong value in CS descriptor.  Does kernel
have a suitable CS descriptor for the last ljmep to 0x10000000 in linear
addressing mode?  The CS descriptor seems to be a pretty dark magic to me ...

Cheers.

Jun

-----------------
diff -Nru linux-2.6.17.14-1st/arch/i386/kernel/machine_kexec.c.orig linux-2.6.17.14-1st/arch/i386/kernel/machine_kexec.c
--- linux-2.6.17.14-1st/arch/i386/kernel/machine_kexec.c.orig   2006-10-13 11:55:04.000000000 -0700
+++ linux-2.6.17.14-1st/arch/i386/kernel/machine_kexec.c        2006-11-22 15:01:45.000000000 -0800
@@ -212,3 +212,19 @@
        rnk = (relocate_new_kernel_t) reboot_code_buffer;
        (*rnk)(page_list, reboot_code_buffer, image->start, cpu_has_pae);
 }
+
+extern void do_os_switching(void);
+void os_switch(void)
+{
+       void (*foo)(void);
+
+       /* absolutely no irq */
+       local_irq_disable();
+
+       /* create identity mapping */
+       foo=virt_to_phys(do_os_switching);
+       identity_map_page((unsigned long)foo);
+
+       /* jump to the real address */
+       foo();
+}


  reply	other threads:[~2006-11-27 23:16 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-11-22 23:41 Jun Sun
2006-11-27 13:58 ` linux-os (Dick Johnson)
2006-11-27 23:16   ` Jun Sun [this message]
2006-11-28 13:46     ` linux-os (Dick Johnson)
2006-11-28 19:45       ` Jun Sun
2006-11-28 23:49         ` linux-os (Dick Johnson)
2006-11-29  1:40           ` Jun Sun
2006-11-30  4:53             ` Jun Sun
2006-11-30 16:17       ` Phillip Susi
2006-12-01 22:20 ` Jun Sun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20061127231646.GA21627@srv.junsun.net \
    --to=jsun@junsun.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-os@analogic.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®