mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Alan Chandler <alan@chandlerfamily.org.uk>
To: linux-kernel@vger.kernel.org
Subject: IDE support on Intel DG965SS
Date: Sun, 10 Dec 2006 15:58:33 +0000	[thread overview]
Message-ID: <200612101558.34005.alan@chandlerfamily.org.uk> (raw)

I have been trying to find out if the kernel supports the IDE channel 
(with a DVD/CD-R unit attached) on my Intel DG965SS motherboard.

Searching the web indicates that for some motherboards based in the 
Intel 965 chipset success has been had for 2.6.18 onward by using the 
kernel boot parameters 

all-generic-ide pci=nommconf

Although these were Fedora Core 6.  

I normally run Debian Unstable - but I have built 2.6.19 and installed 
that (using the Debian .config as the base config) - mainly because to 
get graphics to work it needs 2.6.19 to recognise the ids for the 
agpgart module.

However, despite every thing else working - I can't get the IDE 
controller to be recognised - whether or not I use the above kernel 
boot parameters. I have been UNABLE to find what all-generic-ide does - 
it doesn't seem to be documented anywhere, so I was just blindly 
following someones instructions..

lspci -v shows the following

02:00.0 IDE interface: Marvell Technology Group Ltd. Unknown device 6101 
(rev b1) (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: Marvell Technology Group Ltd. Unknown device 6101
        Flags: bus master, fast devsel, latency 0, IRQ 10
        I/O ports at 1018 [size=8]
        I/O ports at 1024 [size=4]
        I/O ports at 1010 [size=8]
        I/O ports at 1020 [size=4]
        I/O ports at 1000 [size=16]
        Memory at 50100000 (32-bit, non-prefetchable) [size=512]
        Capabilities: [48] Power Management version 2
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- 
Queue=0/0 Enable-
        Capabilities: [e0] Express Legacy Endpoint IRQ 0


Poking about in 

/sys/devices/pci0000:00/0000:00:02.0

Reveals a vendor and subsystem vendor ID of 0x8086 - which is Intel, and 
a subsystem_device of 0x514d.

I had a look in include/linux/pci_ids.h but all I could find there was

#define PCI_DEVICE_ID_ATI_RADEON_QM     0x514d

which doesn't appear related.

Can anyone help me, as to where I can go from here?


-- 
Alan Chandler
http://www.chandlerfamily.org.uk

             reply	other threads:[~2006-12-10 15:58 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-12-10 15:58 Alan Chandler [this message]
2006-12-10 16:30 ` Avi Kivity
2006-12-10 19:34   ` Alan Chandler
2006-12-10 17:08 ` Alan
2006-12-10 20:41 ` Shaun Q
2006-12-10 20:42 ` Shaun Q

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200612101558.34005.alan@chandlerfamily.org.uk \
    --to=alan@chandlerfamily.org.uk \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®