From: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
To: Dave Jones <davej@redhat.com>,
Dominik Brodowski <linux@dominikbrodowski.net>,
Andrew Morton <akpm@osdl.org>
Cc: linux-kernel <linux-kernel@vger.kernel.org>,
Gautham R Shenoy <ego@in.ibm.com>
Subject: [PATCH] ondemand governor restructure the work callback
Date: Fri, 29 Dec 2006 13:34:50 -0800 [thread overview]
Message-ID: <20061229133450.B12358@unix-os.sc.intel.com> (raw)
Restructure the delayed_work callback in ondemand.
This eliminates the need for smp_processor_id in the callback function and also
helps in proper locking and avoiding flush_workqueue when stopping the governor
(done in subsequent patch).
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Index: linux-2.6.20-rc-mm/drivers/cpufreq/cpufreq_ondemand.c
===================================================================
--- linux-2.6.20-rc-mm.orig/drivers/cpufreq/cpufreq_ondemand.c
+++ linux-2.6.20-rc-mm/drivers/cpufreq/cpufreq_ondemand.c
@@ -52,19 +52,20 @@ static unsigned int def_sampling_rate;
static void do_dbs_timer(struct work_struct *work);
/* Sampling types */
-enum dbs_sample {DBS_NORMAL_SAMPLE, DBS_SUB_SAMPLE};
+enum {DBS_NORMAL_SAMPLE, DBS_SUB_SAMPLE};
struct cpu_dbs_info_s {
cputime64_t prev_cpu_idle;
cputime64_t prev_cpu_wall;
struct cpufreq_policy *cur_policy;
struct delayed_work work;
- enum dbs_sample sample_type;
- unsigned int enable;
struct cpufreq_frequency_table *freq_table;
unsigned int freq_lo;
unsigned int freq_lo_jiffies;
unsigned int freq_hi_jiffies;
+ int cpu;
+ unsigned int enable:1,
+ sample_type:1;
};
static DEFINE_PER_CPU(struct cpu_dbs_info_s, cpu_dbs_info);
@@ -402,7 +403,7 @@ static void dbs_check_cpu(struct cpu_dbs
if (load < (dbs_tuners_ins.up_threshold - 10)) {
unsigned int freq_next, freq_cur;
- freq_cur = cpufreq_driver_getavg(policy);
+ freq_cur = __cpufreq_driver_getavg(policy);
if (!freq_cur)
freq_cur = policy->cur;
@@ -423,9 +424,11 @@ static void dbs_check_cpu(struct cpu_dbs
static void do_dbs_timer(struct work_struct *work)
{
- unsigned int cpu = smp_processor_id();
- struct cpu_dbs_info_s *dbs_info = &per_cpu(cpu_dbs_info, cpu);
- enum dbs_sample sample_type = dbs_info->sample_type;
+ struct cpu_dbs_info_s *dbs_info =
+ container_of(work, struct cpu_dbs_info_s, work.work);
+ unsigned int cpu = dbs_info->cpu;
+ int sample_type = dbs_info->sample_type;
+
/* We want all CPUs to do sampling nearly on same jiffy */
int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
@@ -454,17 +457,17 @@ static void do_dbs_timer(struct work_str
queue_delayed_work_on(cpu, kondemand_wq, &dbs_info->work, delay);
}
-static inline void dbs_timer_init(unsigned int cpu)
+static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info)
{
- struct cpu_dbs_info_s *dbs_info = &per_cpu(cpu_dbs_info, cpu);
/* We want all CPUs to do sampling nearly on same jiffy */
int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
delay -= jiffies % delay;
ondemand_powersave_bias_init();
- INIT_DELAYED_WORK_NAR(&dbs_info->work, do_dbs_timer);
dbs_info->sample_type = DBS_NORMAL_SAMPLE;
- queue_delayed_work_on(cpu, kondemand_wq, &dbs_info->work, delay);
+ INIT_DELAYED_WORK_NAR(&dbs_info->work, do_dbs_timer);
+ queue_delayed_work_on(dbs_info->cpu, kondemand_wq, &dbs_info->work,
+ delay);
}
static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info)
@@ -528,6 +531,7 @@ static int cpufreq_governor_dbs(struct c
j_dbs_info->prev_cpu_idle = get_cpu_idle_time(j);
j_dbs_info->prev_cpu_wall = get_jiffies_64();
}
+ this_dbs_info->cpu = cpu;
this_dbs_info->enable = 1;
/*
* Start the timerschedule work, when this governor
@@ -548,7 +552,7 @@ static int cpufreq_governor_dbs(struct c
dbs_tuners_ins.sampling_rate = def_sampling_rate;
}
- dbs_timer_init(policy->cpu);
+ dbs_timer_init(this_dbs_info);
mutex_unlock(&dbs_mutex);
break;
reply other threads:[~2006-12-29 22:03 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061229133450.B12358@unix-os.sc.intel.com \
--to=venkatesh.pallipadi@intel.com \
--cc=akpm@osdl.org \
--cc=davej@redhat.com \
--cc=ego@in.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@dominikbrodowski.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®