[PATCH] update MMConfig patches w/915 support

[Jesse Barnes <jbarnes@virtuousgeek.org>]

This patch updates Oliver's MMConfig bridge detection patches with support
for 915G bridges.  It seems to work ok on my 915GM laptop.

I also tried adding 965 support, but it doesn't work (at least not on my
G965 box).  When I enable MMConfig support when the register value is
0xf00000003 (should be a 256M enabled window at 0xf0000000) the box hangs
at boot, so I'm not sure what I'm doing wrong...

The routines could probably be consolidated into a single probe_intel_9xx
routine or something, but I really looked at that yet (though there are
many similarities between the 91[05], 945 and 965 families, they may not
be enough that the code would actually be simpler if shared.

Thanks,
Jesse

Signed-off-by:  Jesse Barnes <jbarnes@virtuousgeek.org>

diff -Napur -X /home/jbarnes/dontdiff linux-2.6.19-mmconfig.orig/arch/i386/pci/mmconfig-shared.c linux-2.6.19-mmconfig/arch/i386/pci/mmconfig-shared.c
--- linux-2.6.19-mmconfig.orig/arch/i386/pci/mmconfig-shared.c	2007-01-07 10:10:29.000000000 -0800
+++ linux-2.6.19-mmconfig/arch/i386/pci/mmconfig-shared.c	2007-01-07 11:36:24.000000000 -0800
@@ -71,6 +71,25 @@ static __init const char *pci_mmcfg_e752
 	return "Intel Corporation E7520 Memory Controller Hub";
 }
 
+static __init const char *pci_mmcfg_intel_915(void)
+{
+	u32 pciexbar, len = 0;
+
+	pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0x48, 4, &pciexbar);
+
+	/* No enable bit or size field, so assume 256M range is enabled. */
+	len = 0x10000000U;
+	pci_mmcfg_config_num = 1;
+
+	pci_mmcfg_config = kzalloc(sizeof(pci_mmcfg_config[0]), GFP_KERNEL);
+	pci_mmcfg_config[0].base_address = pciexbar;
+	pci_mmcfg_config[0].pci_segment_group_number = 0;
+	pci_mmcfg_config[0].start_bus_number = 0;
+	pci_mmcfg_config[0].end_bus_number = (len >> 20) - 1;
+
+	return "Intel Corporation 915PM/GM/GMS Express Memory Controller Hub";
+}
+
 static __init const char *pci_mmcfg_intel_945(void)
 {
 	u32 pciexbar, mask = 0, len = 0;
@@ -126,6 +145,7 @@ struct pci_mmcfg_hostbridge_probe {
 
 static __initdata struct pci_mmcfg_hostbridge_probe pci_mmcfg_probes[] = {
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, pci_mmcfg_e7520 },
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82915GM_HB, pci_mmcfg_intel_915 },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82945G_HB, pci_mmcfg_intel_945 },
 };