From: "Mark M. Hoffman" <mhoffman@lightlink.com>
To: Adrian Bunk <bunk@stusta.de>
Cc: Jean Delvare <khali@linux-fr.org>,
greg@kroah.com, linux-pci@atrey.karlin.mff.cuni.cz,
linux-kernel@vger.kernel.org, Linus Torvalds <torvalds@osdl.org>
Subject: Re: [-mm patch] remove quirk_sis_96x_compatible()
Date: Sun, 14 Jan 2007 10:22:49 -0500 [thread overview]
Message-ID: <20070114152249.GB2910@jupiter.solarsys.private> (raw)
In-Reply-To: <20070114134632.GX7469@stusta.de>
Hi Adrian:
> On Sun, Jan 07, 2007 at 10:40:49AM -0500, Mark M. Hoffman wrote:
> > It's just cruft from the original quirk. The "compatible" printk could have
> > had value as a diagnostic in case the new quirk didn't work for some reason,
> > but I never saw any complaints about it (apart from the link order problem,
> > which is something different.) It's safe to remove by now.
* Adrian Bunk <bunk@stusta.de> [2007-01-14 14:46:32 +0100]:
> Below is a patch to remove it.
>
> Since 2.6.0-test10, all quirk_sis_96x_compatible() had any effect on
> was a printk().
>
> This patch therefore removes it.
>
> Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Mark M. Hoffman <mhoffman@lightlink.com>
> ---
>
> drivers/pci/quirks.c | 15 ---------------
> 1 file changed, 15 deletions(-)
>
> --- linux-2.6.20-rc4-mm1/drivers/pci/quirks.c.old 2007-01-14 09:58:01.000000000 +0100
> +++ linux-2.6.20-rc4-mm1/drivers/pci/quirks.c 2007-01-14 09:58:37.000000000 +0100
> @@ -1141,8 +1141,6 @@
> *
> * We can also enable the sis96x bit in the discovery register..
> */
> -static int __devinitdata sis_96x_compatible = 0;
> -
> #define SIS_DETECT_REGISTER 0x40
>
> static void quirk_sis_503(struct pci_dev *dev)
> @@ -1158,9 +1156,6 @@
> return;
> }
>
> - /* Make people aware that we changed the config.. */
> - printk(KERN_WARNING "Uncovering SIS%x that hid as a SIS503 (compatible=%d)\n", devid, sis_96x_compatible);
> -
> /*
> * Ok, it now shows up as a 96x.. run the 96x quirk by
> * hand in case it has already been processed.
> @@ -1172,16 +1167,6 @@
> DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503 );
> DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503 );
>
> -static void __init quirk_sis_96x_compatible(struct pci_dev *dev)
> -{
> - sis_96x_compatible = 1;
> -}
> -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_645, quirk_sis_96x_compatible );
> -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_646, quirk_sis_96x_compatible );
> -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_648, quirk_sis_96x_compatible );
> -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_650, quirk_sis_96x_compatible );
> -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_651, quirk_sis_96x_compatible );
> -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_735, quirk_sis_96x_compatible );
>
> /*
> * On ASUS A8V and A8V Deluxe boards, the onboard AC97 audio controller
--
Mark M. Hoffman
mhoffman@lightlink.com
next prev parent reply other threads:[~2007-01-14 15:27 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-12-19 4:13 [-mm patch] drivers/pci/quirks.c: cleanup Adrian Bunk
2006-12-19 8:52 ` Matthew Wilcox
2006-12-19 9:57 ` Adrian Bunk
2007-01-05 8:52 ` Jean Delvare
2007-01-05 23:29 ` Adrian Bunk
2007-01-07 11:30 ` Jean Delvare
2007-01-07 15:40 ` Mark M. Hoffman
2007-01-14 13:46 ` [-mm patch] remove quirk_sis_96x_compatible() Adrian Bunk
2007-01-14 15:22 ` Mark M. Hoffman [this message]
2007-01-07 15:44 ` [-mm patch] drivers/pci/quirks.c: cleanup Mark M. Hoffman
2007-01-08 11:10 ` Jean Delvare
2007-01-09 3:02 ` Mark M. Hoffman
2007-01-09 3:11 ` [PATCH 2.6.20-rc4] i2c/pci: fix sis96x smbus quirk once and for all Mark M. Hoffman
2007-01-09 13:17 ` [-mm patch] drivers/pci/quirks.c: cleanup Jean Delvare
2007-01-10 3:58 ` Mark M. Hoffman
2007-01-10 9:35 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070114152249.GB2910@jupiter.solarsys.private \
--to=mhoffman@lightlink.com \
--cc=bunk@stusta.de \
--cc=greg@kroah.com \
--cc=khali@linux-fr.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@atrey.karlin.mff.cuni.cz \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®