mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Eduard Bloch <edi@gmx.de>
To: linux-kernel@vger.kernel.org
Subject: [2.6.20 regression] No text console picture after X start
Date: Wed, 7 Feb 2007 12:19:53 +0100	[thread overview]
Message-ID: <20070207111953.GA4105@rotes76.wohnheim.uni-kl.de> (raw)

Hello,

I have an ATI Radeon X800 GTO card [1], which works "well"[2] with
xserver-xorg-video-ati 6.6.3-2 (Debian Sid). However, after upgrading to
2.6.20, the console screen is no longer restored after switching the
virtual terminal to first console when X has been started once.
Apparently the keyboard input does work but the picture is frozen at the
last image seen in X and some colors become changed (like on wrong color
pallette mapping).

There was no such problem with 2.6.19.2. No VESA framebuffer is used,
just plain VGA 80x25 text mode. I can return to the X11 console and
continue the work there.

Eduard.

[1]
02:00.0 VGA compatible controller: ATI Technologies Inc R480 [Radeon X800 GTO (PCIE)] (prog-if 00 [VGA])
        Subsystem: PC Partner Limited Unknown device 1600
        Flags: bus master, fast devsel, latency 0, IRQ 3
        Memory at c8000000 (64-bit, prefetchable) [size=128M]
        Memory at d1000000 (64-bit, non-prefetchable) [size=64K]
        I/O ports at 9000 [size=256]
        [virtual] Expansion ROM at d0000000 [disabled] [size=128K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] Express Endpoint IRQ 0
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
        Capabilities: [100] Advanced Error Reporting

02:00.1 Display controller: ATI Technologies Inc R480 [Radeon X800 GTO (PCIE)] (Secondary)
        Subsystem: PC Partner Limited Unknown device 1601
        Flags: fast devsel
        Memory at d1010000 (64-bit, non-prefetchable) [disabled] [size=64K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] Express Endpoint IRQ 0

processor       : 0
vendor_id       : AuthenticAMD
cpu family      : 15
model           : 47
model name      : AMD Athlon(tm) 64 Processor 3500+
stepping        : 0
cpu MHz         : 1000.000
cache size      : 512 KB
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni lahf_lm
bogomips        : 2001.55
TLB size        : 1024 4K pages
clflush size    : 64
cache_alignment : 64
address sizes   : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc


[2]
Well like: I need to disable the dri module in xorg.conf otherwise the
kernel locks up when X starts. This fun has began with 2.6.16 or 2.6.17
or so.

Eduard.

-- 
Naja, Garbage Collector eben. Holt den Müll sogar vom Himmel.
       (Heise Trollforum über Java in der Flugzeugsteuerung)

             reply	other threads:[~2007-02-07 11:19 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-02-07 11:19 Eduard Bloch [this message]
2007-02-07 11:57 ` Eduard Bloch

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070207111953.GA4105@rotes76.wohnheim.uni-kl.de \
    --to=edi@gmx.de \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®