From: Andi Kleen <ak@suse.de>
To: Alexey Dobriyan <adobriyan@gmail.com>,
patches@x86-64.org, linux-kernel@vger.kernel.org
Subject: [PATCH x86 for review II] [27/39] i386: APM on i386
Date: Mon, 12 Feb 2007 08:38:15 +0100 (CET) [thread overview]
Message-ID: <20070212073815.2591A13DD5@wotan.suse.de> (raw)
In-Reply-To: <20070212837.963446000@suse.de>
From: Alexey Dobriyan <adobriyan@gmail.com>
Byte-to-byte identical /proc/apm here.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andi Kleen <ak@suse.de>
---
arch/i386/kernel/apm.c | 26 ++++++++++++++++++--------
1 file changed, 18 insertions(+), 8 deletions(-)
Index: linux/arch/i386/kernel/apm.c
===================================================================
--- linux.orig/arch/i386/kernel/apm.c
+++ linux/arch/i386/kernel/apm.c
@@ -211,6 +211,7 @@
#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/miscdevice.h>
#include <linux/apm_bios.h>
#include <linux/init.h>
@@ -1636,9 +1637,8 @@ static int do_open(struct inode * inode,
return 0;
}
-static int apm_get_info(char *buf, char **start, off_t fpos, int length)
+static int proc_apm_show(struct seq_file *m, void *v)
{
- char * p;
unsigned short bx;
unsigned short cx;
unsigned short dx;
@@ -1650,8 +1650,6 @@ static int apm_get_info(char *buf, char
int time_units = -1;
char *units = "?";
- p = buf;
-
if ((num_online_cpus() == 1) &&
!(error = apm_get_power_status(&bx, &cx, &dx))) {
ac_line_status = (bx >> 8) & 0xff;
@@ -1705,7 +1703,7 @@ static int apm_get_info(char *buf, char
-1: Unknown
8) min = minutes; sec = seconds */
- p += sprintf(p, "%s %d.%d 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n",
+ seq_printf(m, "%s %d.%d 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n",
driver_version,
(apm_info.bios.version >> 8) & 0xff,
apm_info.bios.version & 0xff,
@@ -1716,10 +1714,22 @@ static int apm_get_info(char *buf, char
percentage,
time_units,
units);
+ return 0;
+}
- return p - buf;
+static int proc_apm_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, proc_apm_show, NULL);
}
+static const struct file_operations apm_file_ops = {
+ .owner = THIS_MODULE,
+ .open = proc_apm_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
static int apm(void *unused)
{
unsigned short bx;
@@ -2341,9 +2351,9 @@ static int __init apm_init(void)
set_base(gdt[APM_DS >> 3],
__va((unsigned long)apm_info.bios.dseg << 4));
- apm_proc = create_proc_info_entry("apm", 0, NULL, apm_get_info);
+ apm_proc = create_proc_entry("apm", 0, NULL);
if (apm_proc)
- apm_proc->owner = THIS_MODULE;
+ apm_proc->proc_fops = &apm_file_ops;
kapmd_task = kthread_create(apm, NULL, "kapmd");
if (IS_ERR(kapmd_task)) {
next prev parent reply other threads:[~2007-02-12 7:44 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-02-12 7:37 [PATCH x86 for review II] [1/39] i386: move startup_32() in text.head section Andi Kleen
2007-02-12 7:37 ` [PATCH x86 for review II] [2/39] x86_64: Break init() in two parts to avoid MODPOST warnings Andi Kleen
2007-02-12 7:37 ` [PATCH x86 for review II] [3/39] i386: arch/i386/kernel/cpu/mcheck/mce.c should #include <asm/mce.h> Andi Kleen
2007-02-12 7:37 ` [PATCH x86 for review II] [4/39] i386: add idle notifier Andi Kleen
2007-02-12 7:37 ` [PATCH x86 for review II] [5/39] i386: improve sched_clock() on i686 Andi Kleen
2007-02-12 7:37 ` [PATCH x86 for review II] [6/39] i386: romsignature/checksum cleanup Andi Kleen
2007-02-12 7:37 ` [PATCH x86 for review II] [7/39] x86_64: Fix fake numa for x86_64 machines with big IO hole Andi Kleen
2007-02-12 7:37 ` [PATCH x86 for review II] [8/39] x86_64: Remove fastcall references in x86_64 code Andi Kleen
2007-02-12 7:37 ` [PATCH x86 for review II] [9/39] x86_64: Use constant instead of raw number in x86_64 ioperm.c Andi Kleen
2007-02-12 7:37 ` [PATCH x86 for review II] [10/39] x86_64: Handle 32 bit PerfMon Counter writes cleanly in x86_64 nmi_watchdog Andi Kleen
2007-02-12 7:37 ` [PATCH x86 for review II] [11/39] i386: Handle 32 bit PerfMon Counter writes cleanly in i386 nmi_watchdog Andi Kleen
2007-02-12 7:37 ` [PATCH x86 for review II] [12/39] i386: Handle 32 bit PerfMon Counter writes cleanly in oprofile Andi Kleen
2007-02-12 7:38 ` [PATCH x86 for review II] [13/39] i386: CONFIG_PHYSICAL_ALIGN limited to 4M? Andi Kleen
2007-02-13 6:36 ` Rene Herman
2007-02-12 7:38 ` [PATCH x86 for review II] [14/39] x86_64: cleanup Doc/x86_64/ files Andi Kleen
2007-02-12 7:38 ` [PATCH x86 for review II] [15/39] x86_64: list x86_64 quilt tree Andi Kleen
2007-02-12 7:38 ` [PATCH x86 for review II] [16/39] x86: simplify notify_page_fault() Andi Kleen
2007-02-12 7:38 ` [PATCH x86 for review II] [17/39] x86_64: Tighten mce_amd driver MSR reads Andi Kleen
2007-02-12 7:38 ` [PATCH x86 for review II] [18/39] x86_64: Allow to run a program when a machine check event is detected Andi Kleen
2007-02-12 7:54 ` Oliver Neukum
2007-02-12 8:04 ` Andi Kleen
2007-02-12 8:11 ` Bauke Jan Douma
2007-02-12 15:05 ` [patches] " Pavel Machek
2007-02-12 7:38 ` [PATCH x86 for review II] [19/39] x86_64: remove get_pmd() Andi Kleen
2007-02-12 7:38 ` [PATCH x86 for review II] [20/39] i386: Small cleanup to TLB flush code Andi Kleen
2007-02-12 7:38 ` [PATCH x86 for review II] [21/39] i386: rdmsr_on_cpu, wrmsr_on_cpu Andi Kleen
2007-02-12 7:38 ` [PATCH x86 for review II] [22/39] x86_64: Kconfig typos Andi Kleen
2007-02-12 7:38 ` [PATCH x86 for review II] [23/39] i386: use smp_call_function_single() Andi Kleen
2007-02-12 7:38 ` [PATCH x86 for review II] [24/39] " Andi Kleen
2007-02-12 7:38 ` [PATCH x86 for review II] [25/39] x86_64: Fix preprocessor condition Andi Kleen
2007-02-12 7:38 ` [PATCH x86 for review II] [26/39] i386: fix 32-bit ioctls on x64_32 Andi Kleen
2007-02-12 13:24 ` Giuliano Procida
2007-02-12 22:28 ` Andi Kleen
2007-02-12 7:38 ` Andi Kleen [this message]
2007-02-12 7:38 ` [PATCH x86 for review II] [28/39] i386: fix size_or_mask and size_and_mask Andi Kleen
2007-02-12 7:38 ` [PATCH x86 for review II] [29/39] x86_64: - Ignore long SMI interrupts in clock calibration code - update 1 Andi Kleen
2007-02-12 7:38 ` [PATCH x86 for review II] [30/39] x86_64: Check return value of putreg in PTRACE_SETREGS Andi Kleen
2007-02-12 7:38 ` [PATCH x86 for review II] [31/39] x86_64: Unexport __supported_pte_mask Andi Kleen
2007-02-12 7:38 ` [PATCH x86 for review II] [32/39] x86_64: x86_64 - Fix FS/GS registers for VT execution Andi Kleen
2007-02-12 7:38 ` [PATCH x86 for review II] [33/39] x86_64: Fix off by one error in IOMMU boundary checking Andi Kleen
2007-02-12 7:38 ` [PATCH x86 for review II] [34/39] i386: Use stack arguments for calling into EFI Andi Kleen
2007-02-12 19:45 ` Frédéric RISS
2007-02-12 7:38 ` [PATCH x86 for review II] [35/39] x86_64: Don't reserve ROMs Andi Kleen
2007-02-12 7:38 ` [PATCH x86 for review II] [36/39] x86_64: define dma noncoherent API functions Andi Kleen
2007-02-12 7:38 ` [PATCH x86 for review II] [37/39] x86_64: robustify bad_dma_address handling Andi Kleen
2007-02-12 7:38 ` [PATCH x86 for review II] [38/39] x86: fix laptop bootup hang in init_acpi() Andi Kleen
2007-02-12 7:38 ` [PATCH x86 for review II] [39/39] i386: All Transmeta CPUs have constant TSCs Andi Kleen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070212073815.2591A13DD5@wotan.suse.de \
--to=ak@suse.de \
--cc=adobriyan@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@x86-64.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®