From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, Neil Brown <neilb@suse.de>,
Jeff Garzik <jeff@garzik.org>,
linux-ide@vger.kernel.org, Jens Axboe <jens.axboe@oracle.com>
Subject: Re: 2.6.20-mm2
Date: Sun, 18 Feb 2007 13:44:54 +0100 [thread overview]
Message-ID: <200702181344.54959.rjw@sisk.pl> (raw)
In-Reply-To: <20070217215146.30e7ffa3.akpm@linux-foundation.org>
On Sunday, 18 February 2007 06:51, Andrew Morton wrote:
>
> Temporarily at
>
> http://userweb.kernel.org/~akpm/2.6.20-mm2/
>
> Will appear later at
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.20/2.6.20-mm2/
Two problems:
1) A showstopper with the root partition on RAID1:
md: raid1 personality registered for level 1
[--snip--]
md: multipath personality registered for level -4
register_blkdev: failed to get major for mdp
[--snip--]
VFS: Cannot open root device "md1" or unknown-block(0,0)
At the moment I have no serial console attached to the box, so I had to rewrite
the messages manually.
2) On HPC nx6325 I get the following 100% of the time during the resume from
disk:
BUG: at drivers/pci/pci.c:823 pcim_enable_device()
Call Trace:
[<ffffffff80325ff8>] pcim_enable_device+0x93/0xb3
[<ffffffff803a974a>] ata_pci_device_do_resume+0x21/0x5e
[<ffffffff803b5e6c>] sil_pci_device_resume+0x1c/0x51
[<ffffffff8032800d>] pci_device_resume+0x22/0x53
[<ffffffff8039ae58>] resume_device+0xca/0x131
[<ffffffff8039af40>] dpm_resume+0x81/0xd3
[<ffffffff8039afc2>] device_resume+0x30/0x45
[<ffffffff802a0792>] snapshot_ioctl+0x245/0x63e
[<ffffffff8023cfcc>] do_ioctl+0x5e/0x77
[<ffffffff8022d2b3>] vfs_ioctl+0x25c/0x279
[<ffffffff80246a80>] sys_ioctl+0x5f/0x82
[<ffffffff80215586>] sys_write+0x47/0x70
[<ffffffff8025711e>] system_call+0x7e/0x83
Nevertheless, the system seems to be fully functional after the resume.
[I've been observing it since 2.6.20-git10 and have reported it for a couple
of times, but apparently nobody cares. :-(]
Greetings,
Rafael
next prev parent reply other threads:[~2007-02-18 12:50 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-02-18 5:51 2.6.20-mm2 Andrew Morton
2007-02-18 6:18 ` 2.6.20-mm2 Dave Airlie
2007-02-18 6:34 ` 2.6.20-mm2 Andrew Morton
2007-02-18 12:44 ` Rafael J. Wysocki [this message]
2007-02-18 19:43 ` 2.6.20-mm2 Andrew Morton
2007-02-18 23:25 ` 2.6.20-mm2 Rafael J. Wysocki
2007-02-18 23:39 ` 2.6.20-mm2 Michal Piotrowski
2007-02-19 0:00 ` 2.6.20-mm2 Andrew Morton
2007-02-19 11:28 ` 2.6.20-mm2 Rafael J. Wysocki
2007-02-19 11:45 ` 2.6.20-mm2 Michal Piotrowski
2007-02-20 0:04 ` 2.6.20-mm2 Rafael J. Wysocki
2007-02-20 21:16 ` 2.6.20-mm2 Rafael J. Wysocki
2007-02-20 21:46 ` 2.6.20-mm2 Jeff Garzik
2007-02-20 0:43 ` 2.6.20-mm2 Rafael J. Wysocki
2007-02-20 1:20 ` 2.6.20-mm2 Rafael J. Wysocki
2007-02-20 6:31 ` 2.6.20-mm2 Andrew Morton
2007-02-20 22:12 ` 2.6.20-mm2 Rafael J. Wysocki
2007-02-18 13:06 ` 2.6.20-mm2: Oops in generic_make_request Laurent Riffard
2007-02-18 17:58 ` Mattia Dongili
2007-02-18 19:49 ` Andrew Morton
2007-02-18 20:05 ` Michal Piotrowski
2007-02-20 13:04 ` [-mm patch] fix locking in __make_request (was Re: 2.6.20-mm2: Oops in generic_make_request) Frederik Deweerdt
2007-02-19 13:34 ` Jens Axboe
2007-02-20 14:29 ` Frederik Deweerdt
2007-02-19 13:52 ` Michal Piotrowski
2007-02-19 14:08 ` Michal Piotrowski
2007-02-20 14:32 ` Frederik Deweerdt
2007-02-18 18:20 ` 2.6.20-mm2 Michal Piotrowski
2007-02-18 23:32 ` 2.6.20-mm2 Rafael J. Wysocki
2007-02-19 0:28 ` 2.6.20-mm2 Andrew Morton
2007-02-19 5:13 ` 2.6.20-mm2 David Brownell
2007-02-20 22:07 ` 2.6.20-mm2 Rafael J. Wysocki
2007-02-22 3:57 ` 2.6.20-mm2 David Brownell
2007-02-22 8:33 ` 2.6.20-mm2 Rafael J. Wysocki
2007-02-22 22:17 ` 2.6.20-mm2 David Brownell
2007-02-23 16:36 ` 2.6.20-mm2 David Brownell
2007-03-04 22:36 ` 2.6.20-mm2 Rafael J. Wysocki
2007-02-19 18:28 ` 2.6.20-mm2 Rafael J. Wysocki
2007-02-18 23:33 ` 2.6.20-mm2: compilation fix Rafael J. Wysocki
2007-02-19 0:29 ` Andrew Morton
2007-02-19 11:33 ` Rafael J. Wysocki
2007-02-20 0:07 ` [-mm patch] fs/9p/vfs_addr.c: make 2 functions static Adrian Bunk
2007-02-20 0:54 ` Eric Van Hensbergen
2007-02-20 0:07 ` [-mm patch] drivers/mmc/Kconfig source drivers/mmc/card/Kconfig Adrian Bunk
2007-02-20 6:45 ` Pierre Ossman
2007-02-20 0:08 ` [-mm patch] drivers/video/sm501fb.c: make 4 functions static Adrian Bunk
2007-02-20 0:08 ` 2.6.20-mm2: BLOCK=n compile error Adrian Bunk
2007-02-20 0:08 ` [-mm patch] UNION_FS must depend on SLAB Adrian Bunk
2007-02-20 6:37 ` Pekka Enberg
2007-02-20 15:13 ` Josef Sipek
2007-02-21 3:07 ` [Unionfs] " hooanon05
2007-02-21 22:19 ` Andrew Morton
2007-02-22 2:00 ` Josef Sipek
2007-02-22 2:26 ` Andrew Morton
2007-02-22 3:10 ` Josef Sipek
2007-02-22 6:17 ` Pekka Enberg
2007-02-22 6:18 ` Pekka Enberg
2007-02-22 6:28 ` Josef Sipek
2007-02-22 6:42 ` Christoph Lameter
2007-02-22 2:33 ` [Unionfs] " Erez Zadok
2007-02-21 5:19 ` Josef Sipek
2007-02-20 7:39 ` 2.6.20-mm2 KAMEZAWA Hiroyuki
2007-02-20 10:06 ` 2.6.20-mm2 Andy Whitcroft
2007-02-20 11:14 ` 2.6.20-mm2 Maciej Rutecki
2007-02-20 11:38 ` 2.6.20-mm2 Maciej Rutecki
2007-02-20 21:23 ` 2.6.20-mm2: possible recursive locking detected (reiserfs-related) Rafael J. Wysocki
2007-02-20 22:48 ` Tilman Schmidt
2007-02-21 10:52 ` [-mm patch] MTD_UBI_DEBUG must depend on SYSFS Adrian Bunk
2007-02-21 11:57 ` [-mm patch] i386 mpparse.c: remove an unused variable Adrian Bunk
2007-02-25 13:15 ` 2.6.20-mm2 Jean Delvare
2007-02-27 20:25 ` 2.6.20-mm2 Andrew Morton
2007-02-28 9:07 ` 2.6.20-mm2 Jean Delvare
2007-02-26 22:23 ` [-mm patch] LGUEST must depend on NET Adrian Bunk
2007-02-26 23:42 ` Rusty Russell
2007-03-01 10:48 ` [-mm patch] arch/i386/xen/: possible cleanups Adrian Bunk
2007-03-01 10:53 ` Jeremy Fitzhardinge
2007-03-01 11:55 ` Adrian Bunk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200702181344.54959.rjw@sisk.pl \
--to=rjw@sisk.pl \
--cc=akpm@linux-foundation.org \
--cc=jeff@garzik.org \
--cc=jens.axboe@oracle.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=neilb@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome