From: Avi Kivity <avi@qumranet.com>
To: kvm-devel@lists.sourceforge.net
Cc: linux-kernel@vger.kernel.org, akpm@osdl.org, mingo@elte.hu
Subject: [PATCH 1/13] KVM: mmu: add missing dirty page tracking cases
Date: Mon, 19 Feb 2007 10:21:51 -0000 [thread overview]
Message-ID: <20070219102151.9082E25016B@il.qumranet.com> (raw)
In-Reply-To: <45D979D3.2020907@qumranet.com>
We fail to mark a page dirty in three cases:
- setting the accessed bit in a pte
- setting the dirty bit in a pte
- emulating a write into a pagetable
This fix adds the missing cases.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Index: linux-2.6/drivers/kvm/paging_tmpl.h
===================================================================
--- linux-2.6.orig/drivers/kvm/paging_tmpl.h
+++ linux-2.6/drivers/kvm/paging_tmpl.h
@@ -128,8 +128,10 @@ static int FNAME(walk_addr)(struct guest
goto access_error;
#endif
- if (!(*ptep & PT_ACCESSED_MASK))
- *ptep |= PT_ACCESSED_MASK; /* avoid rmw */
+ if (!(*ptep & PT_ACCESSED_MASK)) {
+ mark_page_dirty(vcpu->kvm, table_gfn);
+ *ptep |= PT_ACCESSED_MASK;
+ }
if (walker->level == PT_PAGE_TABLE_LEVEL) {
walker->gfn = (*ptep & PT_BASE_ADDR_MASK)
@@ -185,6 +187,12 @@ static void FNAME(release_walker)(struct
kunmap_atomic(walker->table, KM_USER0);
}
+static void FNAME(mark_pagetable_dirty)(struct kvm *kvm,
+ struct guest_walker *walker)
+{
+ mark_page_dirty(kvm, walker->table_gfn[walker->level - 1]);
+}
+
static void FNAME(set_pte)(struct kvm_vcpu *vcpu, u64 guest_pte,
u64 *shadow_pte, u64 access_bits, gfn_t gfn)
{
@@ -348,12 +356,15 @@ static int FNAME(fix_write_pf)(struct kv
} else if (kvm_mmu_lookup_page(vcpu, gfn)) {
pgprintk("%s: found shadow page for %lx, marking ro\n",
__FUNCTION__, gfn);
+ mark_page_dirty(vcpu->kvm, gfn);
+ FNAME(mark_pagetable_dirty)(vcpu->kvm, walker);
*guest_ent |= PT_DIRTY_MASK;
*write_pt = 1;
return 0;
}
mark_page_dirty(vcpu->kvm, gfn);
*shadow_ent |= PT_WRITABLE_MASK;
+ FNAME(mark_pagetable_dirty)(vcpu->kvm, walker);
*guest_ent |= PT_DIRTY_MASK;
rmap_add(vcpu, shadow_ent);
next prev parent reply other threads:[~2007-02-19 10:21 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-02-19 10:20 [PATCH 0/13] kvm updates for 2.6.21 Avi Kivity
2007-02-19 10:21 ` Avi Kivity [this message]
2007-02-19 10:22 ` [PATCH 2/13] KVM: Move virtualization deactivation from CPU_DEAD state to CPU_DOWN_PREPARE Avi Kivity
2007-02-19 10:23 ` [PATCH 3/13] KVM: Cosmetics Avi Kivity
2007-02-19 10:24 ` [PATCH 4/13] KVM: vmx: hack set_cr0_no_modeswitch() to actually do modeswitch Avi Kivity
2007-02-19 10:25 ` [PATCH 5/13] KVM: Use ARRAY_SIZE macro instead of manual calculation Avi Kivity
2007-02-19 10:26 ` [PATCH 6/13] KVM: Use page_private()/set_page_private() apis Avi Kivity
2007-02-19 10:27 ` [PATCH 7/13] KVM: add MSR based hypercall API Avi Kivity
2007-02-19 10:28 ` [PATCH 8/13] KVM: Add host hypercall support for vmx Avi Kivity
2007-02-19 10:29 ` [PATCH 9/13] KVM: Add hypercall host support for svm Avi Kivity
2007-02-19 10:30 ` [PATCH 10/13] KVM: Wire up hypercall handlers to a central arch-independent location Avi Kivity
2007-02-21 10:37 ` Pavel Machek
2007-02-22 10:14 ` Avi Kivity
2007-02-22 10:17 ` [kvm-devel] " Dor Laor
2007-02-22 10:22 ` Joerg Roedel
2007-02-22 10:37 ` Avi Kivity
2007-02-22 10:34 ` Arjan van de Ven
2007-02-22 10:40 ` Avi Kivity
2007-02-22 11:01 ` Arjan van de Ven
2007-02-22 13:04 ` Avi Kivity
2007-02-22 13:12 ` Arjan van de Ven
2007-02-22 13:29 ` Avi Kivity
2007-02-22 14:09 ` Arjan van de Ven
2007-02-22 14:20 ` Avi Kivity
2007-02-23 14:55 ` Anthony Liguori
2007-02-22 13:31 ` [kvm-devel] [PATCH 10/13] KVM: Wire up hypercall handlers toa " Dor Laor
2007-02-19 10:31 ` [PATCH 11/13] KVM: svm: init cr0 with the wp bit set Avi Kivity
2007-02-19 10:32 ` [PATCH 12/13] KVM: SVM: intercept SMI to handle it at host level Avi Kivity
2007-02-19 10:33 ` [PATCH 13/13] KVM: More 0 -> NULL conversions Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070219102151.9082E25016B@il.qumranet.com \
--to=avi@qumranet.com \
--cc=akpm@osdl.org \
--cc=kvm-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®