Re: all syscalls initially taking 4usec on a P4? Re: nonblocking UDPv4 recvfrom() taking 4usec @ 3GHz?

[bert hubert <bert.hubert@netherlabs.nl>]

On Tue, Feb 20, 2007 at 02:40:40PM -0500, Benjamin LaHaise wrote:

> Make sure your system is idle.  Userspace bloat means that *lots* of idle 
> activity occurs in between timer ticks on recent distributions -- all those 

You hit the nail on the head. I had previously measured with X shut down,
but the effect didn't disappear.

With init=/bin/bash, recvfrom suddenly takes from 900nsec to 1.3usec, with
only slight correlation between inter-call delay and cycles spent.

I'm investigating this further as it appears this has a real life effect on
my P4 - a drastic one!

processor       : 0
vendor_id       : GenuineIntel
cpu family      : 15
model           : 4
model name      : Intel(R) Pentium(R) 4 CPU 3.00GHz
stepping        : 1
cpu MHz         : 3000.131
cache size      : 1024 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 5
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx
constant_tsc pni monitor ds_cpl cid xtpr
bogomips        : 6003.91
clflush size    : 64

Thanks for your help!

-- 
http://www.PowerDNS.com      Open source, database driven DNS Software 
http://netherlabs.nl              Open and Closed source services