From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965667AbXCGVVS (ORCPT ); Wed, 7 Mar 2007 16:21:18 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S965668AbXCGVVS (ORCPT ); Wed, 7 Mar 2007 16:21:18 -0500 Received: from hermes2.dur.ac.uk ([129.234.8.21]:51937 "EHLO hermes2.dur.ac.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S965671AbXCGVVQ (ORCPT ); Wed, 7 Mar 2007 16:21:16 -0500 Date: Wed, 7 Mar 2007 21:25:34 +0000 From: Ash Milsted To: linux-kernel@vger.kernel.org Cc: linux-acpi@vger.kernel.org, torvalds@linux-foundation.org, dmitry.torokhov@gmail.com Subject: Re: 2.6.21-rc2 regression vs. 2.6.20: AT keyboard only works with pci=noacpi Message-Id: <20070307212534.325f2f32.thatistosayiseenem@gawab.com> In-Reply-To: <20070307120004.0bab0f76.thatistosayiseenem@gawab.com> References: <20070303151424.3b08c33e.thatistosayiseenem@gawab.com> <20070304142350.7c3c79af.thatistosayiseenem@gawab.com> <20070307120004.0bab0f76.thatistosayiseenem@gawab.com> X-Mailer: Sylpheed 2.3.1 (GTK+ 2.10.9; i686-pc-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit X-DurhamAcUk-MailScanner: Found to be clean, Found to be clean Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Wed, 7 Mar 2007 12:00:04 +0000 Ash Milsted wrote: > On Sun, 4 Mar 2007 14:23:50 +0000 > Ash Milsted wrote: > > > On Sat, 3 Mar 2007 15:14:24 +0000 > > Ash Milsted wrote: > > > > > Hi, > > > With 2.6.21-rc2-git1 I have a problem with my ps/2 port keyboard - it only works > > > with one of the following on the command-line: > > > - nolapic > > > - irqfixup > > > - pci=noacpi > > > Otherwise it gets stuck with the numlock on. > > > The following options have no effect: > > > - nohz=off (who knows eh?) > > > - pci=nomsi > > > > snip > > > > > > Ash > > > > Just checked 2.6.21-rc2-mm1, still has the problem. > > Also, acpi=noirq fixes it too. > > To clarify, the problem is that my ps/2 port keyboard is completely frozen > > on boot - usually it gets activated when udev probes for hardware (my kernel > > config is highly modular). It worked fine with 2.6.20 and earlier with acpi > > taking care of interrupt routing. > > > > Ash > > Any thoughts on this? It still occurs with 2.6.21-rc3. Here's my config > in case that helps. You'll see that I have swap-prefetch patched in (I > also have RDSL and some VM changes in there), but I have confirmed that > the problem occurs with no extra patches. By the way, I tested mm1 with > a rather different config (I used my distro package) and still saw the > problem. > > Also, you should probably ignore that bit above where I suggest the > keyboard driver is being loaded as a module, because of course it > isn't.. Yet it does start responding (with pci=noacpi) at about that > time that udev does its thing. > schnip So, I tracked this down to 2.6.21-git7, the first snapshot that gives me this problem. Tellingly it does contain an input tree merge. I would git bisect but I don't have a local copy of the tree - I tried to get one, but it stopped halfway through the clone, probably because I had to use http... So, I hope that helps. Ash PS: I should have said I'm not subscribed, so please CC me on reply. PPS: That almost rhymes. Almost.