[Please Cc: me as I'm not subscribed]

Hello everybody,


[1.] One line summary of the problem :
"BUG: at drivers/hid/hid-core.c:778 implement()" message in logs when booting 
with bluetooth keyboard + mouse.

[2.] Full description of the problem/report :
During bootup, warnings (see below) are emitted in system log. 
Hardware : 
- P4 3.06MHz
- Logitech Cordless MX Desktop for Bluetooth (keyboard + mouse with an USB 
bluetooth adapter).

Please let me know what I could do to help debugging this problem.


[3.] Keywords (i.e., modules, networking, kernel) :
HID, bluetooth, implement(), input

[4.] Kernel version :
Linux version 2.6.21-rc4 (root@kev1) (gcc version 4.1.2 20061115 (prerelease) 
(Debian 4.1.1-21)) #9 SMP PREEMPT Sun Mar 18 22:26:43 CET 2007

[5.] Most recent kernel version which did not have the bug :
Unknown, but I'm quite sure 2.6.20 has this problem.

[6.] Output of Oops.. message (if applicable) : extract of dmesg
BUG: at drivers/hid/hid-core.c:778 implement()
 [<c029e39a>] hid_output_report+0x23f/0x2de
 [<c02886b4>] hid_submit_ctrl+0x59/0x1f2
 [<c0288948>] usbhid_submit_report+0xfb/0x172
 [<c0288c83>] usbhid_init_reports+0x70/0xe1
 [<c028aa16>] hiddev_ioctl+0x435/0xaff
 [<c01402bf>] find_get_page+0x37/0x42
 [<c0142a2d>] filemap_nopage+0x2f0/0x3e8
 [<c016544f>] open_namei+0x79/0x5ad
 [<c014bea8>] __handle_mm_fault+0x221/0x915
 [<c0166564>] do_ioctl+0x64/0x6d
 [<c01665bd>] vfs_ioctl+0x50/0x273
 [<c0166814>] sys_ioctl+0x34/0x50
 [<c0103f16>] sysenter_past_esp+0x5f/0x85
 [<c0360000>] l2cap_sock_sendmsg+0x372/0x397
 =======================
BUG: at drivers/hid/hid-core.c:778 implement()
 [<c029e39a>] hid_output_report+0x23f/0x2de
 [<c02886b4>] hid_submit_ctrl+0x59/0x1f2
 [<c0288948>] usbhid_submit_report+0xfb/0x172
 [<c0288c83>] usbhid_init_reports+0x70/0xe1
 [<c028aa16>] hiddev_ioctl+0x435/0xaff
 [<c01402bf>] find_get_page+0x37/0x42
 [<c0142a2d>] filemap_nopage+0x2f0/0x3e8
 [<c016544f>] open_namei+0x79/0x5ad
 [<c014bea8>] __handle_mm_fault+0x221/0x915
 [<c0166564>] do_ioctl+0x64/0x6d
 [<c01665bd>] vfs_ioctl+0x50/0x273
 [<c0166814>] sys_ioctl+0x34/0x50
 [<c0103f16>] sysenter_past_esp+0x5f/0x85
 [<c0360000>] l2cap_sock_sendmsg+0x372/0x397
 =======================
BUG: at drivers/hid/hid-core.c:778 implement()
 [<c029e39a>] hid_output_report+0x23f/0x2de
 [<c02886b4>] hid_submit_ctrl+0x59/0x1f2
 [<c0288948>] usbhid_submit_report+0xfb/0x172
 [<c0288c83>] usbhid_init_reports+0x70/0xe1
 [<c028aa16>] hiddev_ioctl+0x435/0xaff
 [<c01402bf>] find_get_page+0x37/0x42
 [<c0142a2d>] filemap_nopage+0x2f0/0x3e8
 [<c016544f>] open_namei+0x79/0x5ad
 [<c014bea8>] __handle_mm_fault+0x221/0x915
 [<c0166564>] do_ioctl+0x64/0x6d
 [<c01665bd>] vfs_ioctl+0x50/0x273
 [<c0166814>] sys_ioctl+0x34/0x50
 [<c0103f16>] sysenter_past_esp+0x5f/0x85
 [<c0360000>] l2cap_sock_sendmsg+0x372/0x397
 =======================
BUG: at drivers/hid/hid-core.c:778 implement()
 [<c029e39a>] hid_output_report+0x23f/0x2de
 [<c02886b4>] hid_submit_ctrl+0x59/0x1f2
 [<c03679c1>] schedule_timeout+0x4b/0xa1
 [<c012e6ed>] finish_wait+0x22/0x48
 [<c0288948>] usbhid_submit_report+0xfb/0x172
 [<c012e658>] autoremove_wake_function+0x0/0x37
 [<c028aa16>] hiddev_ioctl+0x435/0xaff
 [<c01402bf>] find_get_page+0x37/0x42
 [<c0142a2d>] filemap_nopage+0x2f0/0x3e8
 [<c016544f>] open_namei+0x79/0x5ad
 [<c014bea8>] __handle_mm_fault+0x221/0x915
 [<c0166564>] do_ioctl+0x64/0x6d
 [<c01665bd>] vfs_ioctl+0x50/0x273
 [<c0166814>] sys_ioctl+0x34/0x50
 [<c0103f16>] sysenter_past_esp+0x5f/0x85
 [<c0360000>] l2cap_sock_sendmsg+0x372/0x397
 =======================
BUG: at drivers/hid/hid-core.c:778 implement()
 [<c029e39a>] hid_output_report+0x23f/0x2de
 [<c02886b4>] hid_submit_ctrl+0x59/0x1f2
 [<c03679c1>] schedule_timeout+0x4b/0xa1
 [<c012e6ed>] finish_wait+0x22/0x48
 [<c0288948>] usbhid_submit_report+0xfb/0x172
 [<c012e658>] autoremove_wake_function+0x0/0x37
 [<c028aa16>] hiddev_ioctl+0x435/0xaff
 [<c01402bf>] find_get_page+0x37/0x42
 [<c0142a2d>] filemap_nopage+0x2f0/0x3e8
 [<c016544f>] open_namei+0x79/0x5ad
 [<c014bea8>] __handle_mm_fault+0x221/0x915
 [<c0166564>] do_ioctl+0x64/0x6d
 [<c01665bd>] vfs_ioctl+0x50/0x273
 [<c0166814>] sys_ioctl+0x34/0x50
 [<c0103f16>] sysenter_past_esp+0x5f/0x85
 [<c0360000>] l2cap_sock_sendmsg+0x372/0x397
 =======================
BUG: at drivers/hid/hid-core.c:778 implement()
 [<c029e39a>] hid_output_report+0x23f/0x2de
 [<c02886b4>] hid_submit_ctrl+0x59/0x1f2
 [<c03679c1>] schedule_timeout+0x4b/0xa1
 [<c012e6ed>] finish_wait+0x22/0x48
 [<c0288948>] usbhid_submit_report+0xfb/0x172
 [<c012e658>] autoremove_wake_function+0x0/0x37
 [<c028aa16>] hiddev_ioctl+0x435/0xaff
 [<c01402bf>] find_get_page+0x37/0x42
 [<c0142a2d>] filemap_nopage+0x2f0/0x3e8
 [<c016544f>] open_namei+0x79/0x5ad
 [<c014bea8>] __handle_mm_fault+0x221/0x915
 [<c0166564>] do_ioctl+0x64/0x6d
 [<c01665bd>] vfs_ioctl+0x50/0x273
 [<c0166814>] sys_ioctl+0x34/0x50
 [<c0103f16>] sysenter_past_esp+0x5f/0x85
 [<c0360000>] l2cap_sock_sendmsg+0x372/0x397
 =======================
BUG: at drivers/hid/hid-core.c:778 implement()
 [<c029e39a>] hid_output_report+0x23f/0x2de
 [<c02886b4>] hid_submit_ctrl+0x59/0x1f2
 [<c03679c1>] schedule_timeout+0x4b/0xa1
 [<c012e6ed>] finish_wait+0x22/0x48
 [<c0288948>] usbhid_submit_report+0xfb/0x172
 [<c012e658>] autoremove_wake_function+0x0/0x37
 [<c028aa16>] hiddev_ioctl+0x435/0xaff
 [<c01402bf>] find_get_page+0x37/0x42
 [<c0142a2d>] filemap_nopage+0x2f0/0x3e8
 [<c016544f>] open_namei+0x79/0x5ad
 [<c014bea8>] __handle_mm_fault+0x221/0x915
 [<c0166564>] do_ioctl+0x64/0x6d
 [<c01665bd>] vfs_ioctl+0x50/0x273
 [<c0166814>] sys_ioctl+0x34/0x50
 [<c0103f16>] sysenter_past_esp+0x5f/0x85
 [<c0360000>] l2cap_sock_sendmsg+0x372/0x397
 =======================
BUG: at drivers/hid/hid-core.c:778 implement()
 [<c029e39a>] hid_output_report+0x23f/0x2de
 [<c02886b4>] hid_submit_ctrl+0x59/0x1f2
 [<c03679c1>] schedule_timeout+0x4b/0xa1
 [<c012e6ed>] finish_wait+0x22/0x48
 [<c0288948>] usbhid_submit_report+0xfb/0x172
 [<c012e658>] autoremove_wake_function+0x0/0x37
 [<c028aa16>] hiddev_ioctl+0x435/0xaff
 [<c01402bf>] find_get_page+0x37/0x42
 [<c0142a2d>] filemap_nopage+0x2f0/0x3e8
 [<c016544f>] open_namei+0x79/0x5ad
 [<c014bea8>] __handle_mm_fault+0x221/0x915
 [<c0166564>] do_ioctl+0x64/0x6d
 [<c01665bd>] vfs_ioctl+0x50/0x273
 [<c0166814>] sys_ioctl+0x34/0x50
 [<c0103f16>] sysenter_past_esp+0x5f/0x85
 [<c0360000>] l2cap_sock_sendmsg+0x372/0x397
 =======================
input: Logitech Bluetooth Mouš as /class/input/input8
input: Logitech Bluetooth Keyboard as /class/input/input9


[7.] A small shell script or example program which
  triggers the problem (if possible) :
Simply boot system with bluetooth keyboard pluged in. Message probably appears 
when USB bluetooth adapter is put in HCI mode (with hid2hci).

[8.1.] Software :
Linux kev1 2.6.21-rc4 #9 SMP PREEMPT Sun Mar 18 22:26:43 CET 2007 i686 
GNU/Linux
 
Gnu C                  4.1.2
Gnu make               3.81
binutils               2.17
util-linux             2.12r
mount                  2.12r
module-init-tools      3.3-pre2
e2fsprogs              1.40-WIP
PPP                    2.4.4
Linux C Library        2.3.6
Dynamic linker (ldd)   2.3.6
Procps                 3.2.7
Net-tools              1.60
Console-tools          0.2.3
Sh-utils               5.97
udev                   105
wireless-tools         29
Modules Loaded         rt2500 radeon drm xt_multiport snd_cs46xx tuner 
snd_seq_midi 8139too cx88_alsa cx8800 cx88xx mii snd_rawmidi snd_ac97_codec 
ir_common video_buf tveeprom btcx_risc ac97_bus

[8.2.] Processor information :
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 15
model		: 2
model name	: Intel(R) Pentium(R) 4 CPU 3.06GHz
stepping	: 7
cpu MHz		: 3066.590
cache size	: 512 KB
physical id	: 0
siblings	: 2
core id		: 0
cpu cores	: 1
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat 
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
bogomips	: 6164.90
clflush size	: 64

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 15
model		: 2
model name	: Intel(R) Pentium(R) 4 CPU 3.06GHz
stepping	: 7
cpu MHz		: 3066.590
cache size	: 512 KB
physical id	: 0
siblings	: 2
core id		: 0
cpu cores	: 1
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat 
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
bogomips	: 6162.06
clflush size	: 64


[8.3.] Module information :
rt2500 172516 0 - Live 0xe1ad2000
radeon 122400 2 - Live 0xe1a81000
drm 126488 3 radeon, Live 0xe1a61000
xt_multiport 3456 1 - Live 0xe08a5000
snd_cs46xx 80456 3 - Live 0xe08ea000
tuner 59304 0 - Live 0xe1915000
snd_seq_midi 8736 0 - Live 0xe08a1000
8139too 25216 0 - Live 0xe08ab000
cx88_alsa 13352 1 - Live 0xe0879000
cx8800 33520 0 - Live 0xe0836000
cx88xx 67108 2 cx88_alsa,cx8800, Live 0xe08d8000
mii 5888 1 8139too, Live 0xe0833000
snd_rawmidi 23840 2 snd_cs46xx,snd_seq_midi, Live 0xe0824000
snd_ac97_codec 93984 1 snd_cs46xx, Live 0xe08c0000
ir_common 34692 1 cx88xx, Live 0xe0869000
video_buf 24580 3 cx88_alsa,cx8800,cx88xx, Live 0xe0861000
tveeprom 15248 1 cx88xx, Live 0xe082b000
btcx_risc 5128 3 cx88_alsa,cx8800,cx88xx, Live 0xe0821000
ac97_bus 2688 1 snd_ac97_codec, Live 0xe081f000

[8.4.] Loaded driver and hardware information :
# cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:02.5
  0170-0177 : ide1
01f0-01f7 : 0000:00:02.5
0290-0297 : it87-isa
02f8-02ff : serial
0376-0376 : 0000:00:02.5
  0376-0376 : ide1
03c0-03df : vga+
03f2-03f5 : floppy
03f6-03f6 : 0000:00:02.5
03f7-03f7 : floppy DIR
03f8-03ff : serial
0cf8-0cff : PCI conf1
1000-1003 : ACPI PM1a_EVT_BLK
1004-1005 : ACPI PM1a_CNT_BLK
1008-100b : ACPI PM_TMR
1016-1016 : ACPI PM2_CNT_BLK
1020-1023 : ACPI GPE0_BLK
1030-1033 : ACPI GPE1_BLK
1400-141f : 0000:00:02.1
  1400-141f : sis96x_smbus
a000-afff : PCI Bus #01
  a000-a0ff : 0000:01:00.0
    a000-a0ff : radeon
b800-b8ff : 0000:00:0b.0
  b800-b8ff : 8139too
bc10-bc17 : 0000:00:0e.0
  bc10-bc17 : ide2
c000-c003 : 0000:00:0e.0
  c002-c002 : ide2
c410-c417 : 0000:00:0e.0
  c410-c417 : ide3
c800-c803 : 0000:00:0e.0
  c802-c802 : ide3
cc00-cc0f : 0000:00:0e.0
  cc00-cc07 : ide2
  cc08-cc0f : ide3
d000-d03f : 0000:00:0f.0
  d000-d03f : e1000
d400-d407 : 0000:00:10.0
d800-d803 : 0000:00:10.0
dc00-dc07 : 0000:00:10.0
e000-e003 : 0000:00:10.0
e400-e40f : 0000:00:10.0
f000-f00f : 0000:00:02.5
  f000-f007 : ide0
  f008-f00f : ide1

# cat /proc/iomem
00000000-0009ffff : System RAM
  00000000-00000000 : Crash kernel
000a0000-000bffff : Video RAM area
000c0000-000ccfff : Video ROM
000d0000-000d47ff : Adapter ROM
000f0000-000fffff : System ROM
00100000-1ffeffff : System RAM
  00100000-00369b82 : Kernel code
  00369b83-0043d537 : Kernel data
1fff0000-1fff2fff : ACPI Non-volatile Storage
1fff3000-1fffffff : ACPI Tables
30000000-3007ffff : 0000:00:10.0
30080000-3009ffff : 0000:00:0e.0
300a0000-300affff : 0000:00:0b.0
e0000000-e7ffffff : 0000:00:00.0
e8000000-f7ffffff : PCI Bus #01
  e8000000-efffffff : 0000:01:00.0
    e8000000-efffffff : radeon
  f0000000-f7ffffff : 0000:01:00.1
f8000000-f9ffffff : PCI Bus #01
  f8000000-f801ffff : 0000:01:00.0
  f9000000-f900ffff : 0000:01:00.0
    f9000000-f900ffff : radeon
  f9010000-f901ffff : 0000:01:00.1
fb000000-fbffffff : 0000:00:0c.0
  fb000000-fbffffff : cx88[0]
fc000000-fcffffff : 0000:00:0c.1
  fc000000-fcffffff : cx88[0]
fd000000-fd0fffff : 0000:00:0d.0
  fd000000-fd002fff : CS46xx_BA1_data0
  fd010000-fd0137ff : CS46xx_BA1_data1
  fd020000-fd026fff : CS46xx_BA1_pmem
  fd030000-fd0300ff : CS46xx_BA1_reg
fd100000-fd11ffff : 0000:00:0f.0
  fd100000-fd11ffff : e1000
fd120000-fd121fff : 0000:00:0a.0
  fd120000-fd121fff : 0000:00:0a.0
fd123000-fd1230ff : 0000:00:0b.0
  fd123000-fd1230ff : 8139too
fd124000-fd124fff : 0000:00:03.0
  fd124000-fd124fff : ohci_hcd
fd125000-fd125fff : 0000:00:03.1
  fd125000-fd125fff : ohci_hcd
fd126000-fd126fff : 0000:00:0d.0
  fd126000-fd126fff : CS46xx_BA0
fd127000-fd127fff : 0000:00:03.2
  fd127000-fd127fff : ohci_hcd
fd128000-fd128fff : 0000:00:03.3
  fd128000-fd128fff : ehci_hcd
fd129000-fd1291ff : 0000:00:10.0
  fd129000-fd1291ff : sata_sil
fec00000-ffffffff : reserved

[8.5.] PCI information :
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 655 Host (rev 10)
	Subsystem: Silicon Integrated Systems [SiS] 655 Host
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR-
	Latency: 32
	Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=128M]
	Capabilities: [c0] AGP version 3.0
		Status: RQ=32 Iso- ArqSz=2 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ 
AGP3+ Rate=x4,x8
		Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8

00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202 (prog-if 00 
[Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR+ FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
	Latency: 64
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	I/O behind bridge: 0000a000-0000afff
	Memory behind bridge: f8000000-f9ffffff
	Prefetchable memory behind bridge: e8000000-f7ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-

00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] 
(rev 04)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
	Latency: 0

00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
	Interrupt: pin B routed to IRQ 0
	Region 4: I/O ports at 1400 [size=32]

00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 
[Master])
	Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller (A,B 
step)
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
	Latency: 128
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] 
[size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] 
[size=1]
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] 
[size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] 
[size=1]
	Region 4: I/O ports at f000 [size=16]

00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller 
(rev 0f) (prog-if 10 [OHCI])
	Subsystem: Silicon Integrated Systems [SiS] USB 1.0 Controller
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR+
	Latency: 32 (20000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at fd124000 (32-bit, non-prefetchable) [size=4K]

00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller 
(rev 0f) (prog-if 10 [OHCI])
	Subsystem: Silicon Integrated Systems [SiS] USB 1.0 Controller
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
	Latency: 32 (20000ns max), Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 21
	Region 0: Memory at fd125000 (32-bit, non-prefetchable) [size=4K]

00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller 
(rev 0f) (prog-if 10 [OHCI])
	Subsystem: Silicon Integrated Systems [SiS] USB 1.0 Controller
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
	Latency: 32 (20000ns max), Cache Line Size: 32 bytes
	Interrupt: pin C routed to IRQ 22
	Region 0: Memory at fd127000 (32-bit, non-prefetchable) [size=4K]

00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller 
(prog-if 20 [EHCI])
	Subsystem: Giga-byte Technology Unknown device 5004
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
	Latency: 32 (20000ns max)
	Interrupt: pin D routed to IRQ 19
	Region 0: Memory at fd128000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0a.0 Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01)
	Subsystem: Micro-Star International Co., Ltd. Unknown device 6834
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
	Latency: 32, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at fd120000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL-8139/8139C/8139C+ (rev 10)
	Subsystem: Realtek Semiconductor Co., Ltd. RT8139
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
	Latency: 32 (8000ns min, 16000ns max)
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at b800 [size=256]
	Region 1: Memory at fd123000 (32-bit, non-prefetchable) [size=256]
	[virtual] Expansion ROM at 300a0000 [disabled] [size=64K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0c.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and 
Audio Decoder (rev 03)
	Subsystem: Hauppauge computer works Inc. Hauppauge WinTV 34xxx models
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
	Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
	Capabilities: [44] Vital Product Data
	Capabilities: [4c] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0c.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio 
Decoder [Audio Port] (rev 03)
	Subsystem: Hauppauge computer works Inc. Hauppauge WinTV 34xxx models
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
	Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
	Capabilities: [44] Vital Product Data
	Capabilities: [4c] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0d.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24/30 
[CrystalClear SoundFusion Audio Accelerator] (rev 01)
	Subsystem: Hercules Unknown device a010
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
	Latency: 32 (1000ns min, 6000ns max)
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at fd126000 (32-bit, non-prefetchable) [size=4K]
	Region 1: Memory at fd000000 (32-bit, non-prefetchable) [size=1M]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0e.0 RAID bus controller: <pci_lookup_name: buffer too small> (rev 10)
	Subsystem: Integrated Technology Express, Inc. IT/ITE8212 Dual channel ATA 
RAID controller
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
	Latency: 0 (2000ns min, 2000ns max)
	Interrupt: pin A routed to IRQ 17
	Region 0: I/O ports at bc10 [size=8]
	Region 1: I/O ports at c000 [size=4]
	Region 2: I/O ports at c410 [size=8]
	Region 3: I/O ports at c800 [size=4]
	Region 4: I/O ports at cc00 [size=16]
	[virtual] Expansion ROM at 30080000 [disabled] [size=128K]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0f.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet 
Controller (rev 02)
	Subsystem: Intel Corporation Unknown device 3013
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
	Latency: 32 (63750ns min), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at fd100000 (32-bit, non-prefetchable) [size=128K]
	Region 2: I/O ports at d000 [size=64]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [e4] PCI-X non-bridge device
		Command: DPERE- ERO+ RBC=512 OST=1
		Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple DMMRBC=2048 DMOST=1 
DMCRS=16 RSCEM- 266MHz- 533MHz-
	Capabilities: [f0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 
Enable-
		Address: 0000000000000000  Data: 0000

00:10.0 Mass storage controller: Silicon Image, Inc. SiI 3112 
[SATALink/SATARaid] Serial ATA Controller (rev 02)
	Subsystem: Silicon Image, Inc. SiI 3112 SATALink Controller
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
	Latency: 32, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: I/O ports at d400 [size=8]
	Region 1: I/O ports at d800 [size=4]
	Region 2: I/O ports at dc00 [size=8]
	Region 3: I/O ports at e000 [size=4]
	Region 4: I/O ports at e400 [size=16]
	Region 5: Memory at fd129000 (32-bit, non-prefetchable) [size=512]
	[virtual] Expansion ROM at 30000000 [disabled] [size=512K]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-

01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AS [Radeon 9550] 
(prog-if 00 [VGA])
	Subsystem: Unknown device 0001:0370
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
	Latency: 32 (2000ns min), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
	Region 1: I/O ports at a000 [size=256]
	Region 2: Memory at f9000000 (32-bit, non-prefetchable) [size=64K]
	[virtual] Expansion ROM at f8000000 [disabled] [size=128K]
	Capabilities: [58] AGP version 3.0
		Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ 
AGP3+ Rate=x4,x8
		Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.1 Display controller: ATI Technologies Inc RV350 AS [Radeon 9550] 
(Secondary)
	Subsystem: Unknown device 0001:0371
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
	Latency: 32 (2000ns min), Cache Line Size: 32 bytes
	Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
	Region 1: Memory at f9010000 (32-bit, non-prefetchable) [size=64K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-


[8.6.] SCSI information :
Attached devices: 
Host: scsi0 Channel: 00 Target: 00 Lun: 00
  Vendor: ATA      Model: WDC WD360GD-00FN Rev: 35.0
  Type:   Direct-Access                    ANSI SCSI revision: 05

[8.7.] lsusb (attached); dmesg (attached)

-- 
Kevin Baradon
Networks & Telecom Student
-