From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
To: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: David Howells <dhowells@redhat.com>,
Catalin Marinas <catalin.marinas@arm.com>,
ARM Linux Mailing List <linux-arm-kernel@lists.arm.linux.org.uk>,
Dan Williams <dan.j.williams@intel.com>,
linux-kernel@vger.kernel.org, torvalds@osdl.org
Subject: Re: I/O memory barriers vs SMP memory barriers
Date: Mon, 26 Mar 2007 13:07:11 -0700 [thread overview]
Message-ID: <20070326200711.GA31296@linux.vnet.ibm.com> (raw)
In-Reply-To: <20070326084639.GA30291@xi.wantstofly.org>
On Mon, Mar 26, 2007 at 10:46:39AM +0200, Lennert Buytenhek wrote:
> On Sun, Mar 25, 2007 at 08:24:18PM -0700, Paul E. McKenney wrote:
>
> > > > > > [ background: On ARM, SMP synchronisation does need barriers but device
> > > > > > synchronisation does not. The question is that given this, whether
> > > > > > mb() and friends can be NOPs on ARM or not (i.e. whether mb() is
> > > > > > supposed to sync against other CPUs or not, or whether only smp_mb()
> > > > > > can be used for this.) ]
> > > > >
> > > > > Hmmmm...
> > > > >
> > > > > [snip]
> > > >
> > > > 3. Orders memory accesses and device accesses, but not necessarily
> > > > the union of the two -- mb(), rmb(), wmb().
> > >
> > > If mb/rmb/wmb are required to order normal memory accesses, that means
> > > that the change made in commit 9623b3732d11b0a18d9af3419f680d27ea24b014
> > > to always define mb/rmb/wmb as barrier() on ARM systems was wrong.
> >
> > This was on UP ARM systems, right?
>
> No.
>
> If you look at commit 9623b3732d11b0a18d9af3419f680d27ea24b014, you can
> see that it defines mb/rmb/wmb as barrier() on both ARM UP and SMP systems.
> The UP part is obviously fine, the SMP part is what is under debate here.
Yep, looks wrong to me.
> > Assuming that ARM CPUs respect the usual CPU-self-consistency
> > semantics, and given the background that device accesses are ordered,
> > then it might well be OK to have mb/rmb/wmb be barrier() on UP ARM
> > systems.
> >
> > Most likely not on SMP ARM systems, however.
>
> Given the semantics above, mb/rmb/wmb can obviously be just barrier()s
> on ARM UP systems.. I don't think anyone ever disagreed about that.
Good.
> > > Does everybody agree on these semantics, though? At least David
> > > seems to think that mb/rmb/wmb aren't required to order normal
> > > memory accesses against each other..
> >
> > Not on UP. On SMP, ordering is (almost certainly) required.
>
> 'almost certainly'? That sounds like there is a possibility that it
> wouldn't have to? What does this depend on?
The underlying memory model of the CPU. For sequentially consistent
systems, only compiler barriers are required. There are very few such
systems -- MIPS and PA-RISC, if I remember correctly. Performance
dictates otherwise.
I believe that MIPS is -not- sequentially consistent, but have not yet
purchased an architecture reference manual.
> At least David and Catalin seem to disagree with the statement
> that mb/rmb/wmb should order accesses from different CPUs. And
> memory-barriers.txt is pretty vague about this..
mb() needs to do everything that smp_mb() does, ditto for rmb() and
wmb(). There really are cases where both I/O and memory accesses
need to be ordered, so just providing separate memory ordering and
I/O ordering is not enough.
Given that ARM device drivers are accessing MMIO locations, which are
often slow anyway, how much is ARM really gaining by dropping memory
barriers when only I/O accesses need be ordered? Is it measurable?
If not, there is no point in adding yet another set of combinatorial
choices to the memory-barrier API.
Thanx, Paul
next prev parent reply other threads:[~2007-03-28 14:27 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20070323111350.GD3980@xi.wantstofly.org>
[not found] ` <e9c3a7c20703021312y5f7aa228i5d1c84a8e9ea5676@mail.gmail.com>
[not found] ` <20070303111427.GB16944@xi.wantstofly.org>
[not found] ` <20070303113305.GB10515@flint.arm.linux.org.uk>
[not found] ` <20070321221134.GA22497@xi.wantstofly.org>
[not found] ` <tnxlkhpgslz.fsf@arm.com>
2007-03-23 13:43 ` David Howells
2007-03-23 15:08 ` Lennert Buytenhek
2007-03-24 20:16 ` Benjamin Herrenschmidt
2007-03-25 21:15 ` Paul E. McKenney
2007-03-25 21:38 ` Lennert Buytenhek
2007-03-26 3:24 ` Paul E. McKenney
2007-03-26 8:46 ` Lennert Buytenhek
2007-03-26 20:07 ` Paul E. McKenney [this message]
2007-03-28 18:36 ` Lennert Buytenhek
2007-03-26 10:04 ` David Howells
2007-03-26 10:07 ` David Howells
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070326200711.GA31296@linux.vnet.ibm.com \
--to=paulmck@linux.vnet.ibm.com \
--cc=buytenh@wantstofly.org \
--cc=catalin.marinas@arm.com \
--cc=dan.j.williams@intel.com \
--cc=dhowells@redhat.com \
--cc=linux-arm-kernel@lists.arm.linux.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome