From: Helge Hafting <helgehaf@aitel.hist.no>
To: Jiri Kosina <jikos@jikos.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>,
linux-kernel@vger.kernel.org,
linux-usb-devel@lists.sourceforge.net
Subject: Re: 2.6.21-rc6-mm1 USB related boot hang
Date: Thu, 12 Apr 2007 21:22:57 +0200 [thread overview]
Message-ID: <20070412192257.GA13535@aitel.hist.no> (raw)
In-Reply-To: <Pine.LNX.4.64.0704120947230.12991@twin.jikos.cz>
On Thu, Apr 12, 2007 at 09:50:54AM +0200, Jiri Kosina wrote:
> On Thu, 12 Apr 2007, Helge Hafting wrote:
>
> > > OK. If you add initcall_debug to the kernel boot command line, what's the
> > > last thing we call?
> > The last messages (handwritten, somewhat shortened)
> > calling hid_init+0x0/0x10()
> > returned 0
> > ran for 0 msec
> > calling hid_init+0x0/0x50()
> > usbcore registered new interface driver hiddev
> > and then it hangs completely.
>
> Hi Helge,
>
> 2.6.21-rc6 (without any -mm patches) works fine?
>
> Could you please
>
> - try booting without any HID devices plugged in (i.e. usb mice, usb
> keyboards) if the problem persists?
Pulled the usb mouse - this moved the crash around.
usbhid was registered anyway, but later than usual.
The last messages:
md: <...>
cpuidle: <...>
sdhci: <...>
sdhci: <...>
usbcore: registered new interface hiddev
usbcore: registered new interface usbhid
drivers/hid/usbhid/hid_core.c v2.6 USB HID coredriver
Advanced linux sound architecture <...>
ACPI: PCI Interrupt 0000:00:06.0[A]->GSI 17 (lewel,low)->IRQ 17
And then it hung. Rebooting into rc5mm4, I got this as the next msgs:
gameport: Trident 4DWave is pci0000:00:06.0/gameport0, speed 1966kHz
ALSA device list:
#0: Trident TRID4DWAVENX PCI Audio at 0x9400, irq 17
oprofile: using NMI interrupt.
Netfilter messages via NETLINK v0.30.
I don't know if this is another problem, or what.
> - recompile 2.6.21-rc6-mm1 with git-hid.patch reverted to see if it helps?
>
Just downloaded it. Unfortunately, it will not revert cleanly:
$ patch -p1 -R --dry-run < ../git-hid.patch
patching file drivers/hid/Kconfig
patching file drivers/hid/Makefile
patching file drivers/hid/hid-core.c
Hunk #1 succeeded at 30 (offset -1 lines).
Hunk #2 succeeded at 871 (offset -1 lines).
Hunk #3 succeeded at 968 (offset -1 lines).
Hunk #4 succeeded at 984 (offset -1 lines).
patching file drivers/hid/hid-input.c
Hunk #1 succeeded at 433 (offset 2 lines).
Hunk #2 succeeded at 533 (offset 2 lines).
patching file drivers/hid/hidraw.c
patching file drivers/hid/usbhid/Kconfig
patching file drivers/hid/usbhid/Makefile
patching file drivers/hid/usbhid/hid-core.c
Unreversed patch detected! Ignore -R? [n]
Apply anyway? [n]
Skipping patch.
1 out of 1 hunk ignored -- saving rejects to file
drivers/hid/usbhid/hid-core.c.
rej
patching file drivers/hid/usbhid/hid-ff.c
patching file drivers/hid/usbhid/hid-lgff.c
patching file drivers/hid/usbhid/hid-pidff.c
patching file drivers/hid/usbhid/hid-plff.c
patching file drivers/hid/usbhid/hid-tmff.c
patching file drivers/hid/usbhid/hid-zpff.c
patching file drivers/hid/usbhid/hiddev.c
patching file drivers/hid/usbhid/usbhid.h
patching file drivers/hid/usbhid/usbkbd.c
patching file drivers/hid/usbhid/usbmouse.c
patching file drivers/usb/Makefile
patching file drivers/usb/input/Kconfig
patching file drivers/usb/input/Makefile
Hunk #1 FAILED at 4.
1 out of 1 hunk FAILED -- saving rejects to file
drivers/usb/input/Makefile.rej
patching file drivers/usb/input/hid-core.c
patching file drivers/usb/input/hid-ff.c
patching file drivers/usb/input/hid-lgff.c
patching file drivers/usb/input/hid-pidff.c
patching file drivers/usb/input/hid-plff.c
patching file drivers/usb/input/hid-tmff.c
patching file drivers/usb/input/hid-zpff.c
patching file drivers/usb/input/hiddev.c
patching file drivers/usb/input/usbhid.h
patching file drivers/usb/input/usbkbd.c
patching file drivers/usb/input/usbmouse.c
patching file include/linux/hid.h
patching file include/linux/hidraw.h
Do you want me to try that patch anyway?
Helge Hafting
next prev parent reply other threads:[~2007-04-12 19:29 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-08 21:35 2.6.21-rc6-mm1 Andrew Morton
2007-04-09 11:13 ` 2.6.21-rc6-mm1 Borislav Petkov
2007-04-09 16:08 ` 2.6.21-rc6-mm1 Rafael J. Wysocki
2007-04-09 16:14 ` 2.6.21-rc6-mm1 Pallipadi, Venkatesh
2007-04-09 17:40 ` 2.6.21-rc6-mm1 Rafael J. Wysocki
2007-04-10 22:20 ` 2.6.21-rc6-mm1 Venki Pallipadi
2007-04-11 19:28 ` 2.6.21-rc6-mm1 Rafael J. Wysocki
2007-04-10 23:59 ` 2.6.21-rc6-mm1 Adam Belay
2007-04-11 0:15 ` 2.6.21-rc6-mm1 Venki Pallipadi
2007-04-11 5:20 ` 2.6.21-rc6-mm1 Stephane Eranian
2007-04-11 10:39 ` 2.6.21-rc6-mm1 Andi Kleen
2007-04-11 13:09 ` 2.6.21-rc6-mm1 Stephane Eranian
2007-04-11 13:19 ` 2.6.21-rc6-mm1 Andi Kleen
2007-04-11 18:06 ` 2.6.21-rc6-mm1 Andrew Morton
2007-04-09 19:03 ` 2.6.21-rc6-mm1 Torsten Kaiser
2007-04-09 21:42 ` <linux/wait.h> uses definitions from <linux/sched.h> (was Re: 2.6.21-rc6-mm1) Stefan Richter
2007-04-09 22:01 ` Stefan Richter
2007-04-10 0:50 ` 2.6.21-rc6-mm1 Nishanth Aravamudan
2007-04-10 0:56 ` 2.6.21-rc6-mm1 Christoph Lameter
2007-04-10 1:07 ` 2.6.21-rc6-mm1 William Lee Irwin III
2007-04-10 11:28 ` 2.6.21-rc6-mm1 ima "BUG: held lock freed!" Joseph Fannin
2007-04-10 12:24 ` 2.6.21-rc6-mm1 Cornelia Huck
2007-04-10 12:38 ` 2.6.21-rc6-mm1 Ananth N Mavinakayanahalli
2007-04-10 21:08 ` [-mm patch] make struct proc_kpagemap static Adrian Bunk
2007-04-10 21:09 ` Matt Mackall
2007-04-10 21:08 ` [-mm patch] make kernel/module.c:is_exported() static Adrian Bunk
2007-04-10 21:08 ` [RFC: -mm patch] fs/ocfs2/: make 3 functions static Adrian Bunk
2007-04-10 22:21 ` 2.6.21-rc6-mm1 aacraid not finding device Steve Fox
2007-04-13 12:35 ` [PATCH] aacraid: " Salyzyn, Mark
2007-04-11 19:42 ` 2.6.21-rc6-mm1 USB related boot hang Helge Hafting
2007-04-11 20:43 ` Andrew Morton
2007-04-11 23:07 ` Helge Hafting
2007-04-11 23:25 ` Andrew Morton
2007-04-12 7:50 ` Jiri Kosina
2007-04-12 8:02 ` Jiri Kosina
2007-04-12 11:42 ` Helge Hafting
2007-04-12 16:47 ` Andrew Morton
2007-04-12 18:56 ` Helge Hafting
2007-04-12 15:31 ` Jiri Kosina
2007-04-12 16:01 ` Corey Minyard
2007-04-12 16:55 ` Andrew Morton
2007-04-12 17:25 ` Greg KH
2007-04-12 17:49 ` Jiri Kosina
2007-04-12 17:58 ` Greg KH
2007-04-12 18:17 ` Jiri Kosina
2007-04-12 21:06 ` Corey Minyard
2007-04-12 20:19 ` Helge Hafting
2007-04-12 19:22 ` Helge Hafting [this message]
2007-04-12 18:32 ` Jiri Kosina
2007-04-12 20:25 ` Helge Hafting
2007-04-12 23:16 ` Jiri Kosina
2007-04-25 9:54 ` Helge Hafting
2007-04-25 11:28 ` Jiri Kosina
2007-04-25 12:45 ` Helge Hafting
2007-04-26 18:38 ` Helge Hafting
2007-04-26 22:28 ` 2.6.21-rc6-mm1 USB related boot hang - bisection result Helge Hafting
2007-04-26 22:39 ` Jiri Kosina
2007-04-26 23:13 ` Andrew Morton
2007-04-27 21:04 ` Helge Hafting
2007-04-27 22:41 ` Andrew Morton
2007-04-13 23:45 ` CPU_IDLE prevents resuming from STR [was: Re: 2.6.21-rc6-mm1] Mattia Dongili
2007-04-16 2:40 ` Shaohua Li
2007-04-17 2:50 ` Joshua Wise
2007-04-17 2:50 ` Shaohua Li
2007-04-17 6:47 ` Shaohua Li
2007-04-18 23:00 ` Joshua Wise
2007-04-19 1:05 ` Shaohua Li
2007-04-24 8:10 ` 2.6.21-rc6-mm1 J.A. Magallón
2007-04-24 11:58 ` 2.6.21-rc6-mm1 Andrew Morton
2007-04-24 13:43 ` 2.6.21-rc6-mm1 J.A. Magallón
2007-04-24 17:22 ` 2.6.21-rc6-mm1 Andrew Morton
2007-04-25 20:50 ` 2.6.21-rc6-mm1 J.A. Magallón
2007-04-25 21:39 ` start_udev and devpts [Re: 2.6.21-rc6-mm1] J.A. Magallón
2007-04-25 22:26 ` J.A. Magallón
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070412192257.GA13535@aitel.hist.no \
--to=helgehaf@aitel.hist.no \
--cc=akpm@linux-foundation.org \
--cc=jikos@jikos.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®