From: Andi Kleen <ak@suse.de>
To: Jeremy Fitzhardinge <jeremy@goop.org>,
patches@x86-64.org, linux-kernel@vger.kernel.org
Subject: [PATCH] [11/26] i386: clean up identify_cpu
Date: Mon, 30 Apr 2007 01:46:20 +0200 (CEST) [thread overview]
Message-ID: <20070429234620.6FFCD150F2@wotan.suse.de> (raw)
In-Reply-To: <20070430146.588463000@suse.de>
From: Jeremy Fitzhardinge <jeremy@goop.org>
identify_cpu() is used to identify both the boot CPU and secondary
CPUs, but it performs some actions which only apply to the boot CPU.
Those functions are therefore really __init functions, but because
they're called by identify_cpu(), they must be marked __cpuinit.
This patch splits identify_cpu() into identify_boot_cpu() and
identify_secondary_cpu(), and calls the appropriate init functions
from each. Also, identify_boot_cpu() and all the functions it
dominates are marked __init.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
---
arch/i386/kernel/cpu/common.c | 21 ++++++++++++++-------
arch/i386/kernel/smpboot.c | 2 +-
arch/i386/kernel/sysenter.c | 2 +-
include/asm-i386/processor.h | 3 ++-
4 files changed, 18 insertions(+), 10 deletions(-)
===================================================================
Index: linux/arch/i386/kernel/cpu/common.c
===================================================================
--- linux.orig/arch/i386/kernel/cpu/common.c
+++ linux/arch/i386/kernel/cpu/common.c
@@ -394,7 +394,7 @@ __setup("serialnumber", x86_serial_nr_se
/*
* This does the hard work of actually picking apart the CPU stuff...
*/
-void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
+static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
{
int i;
@@ -505,15 +505,22 @@ void __cpuinit identify_cpu(struct cpuin
/* Init Machine Check Exception if available. */
mcheck_init(c);
+}
- if (c == &boot_cpu_data)
- sysenter_setup();
+void __init identify_boot_cpu(void)
+{
+ identify_cpu(&boot_cpu_data);
+ sysenter_setup();
enable_sep_cpu();
+ mtrr_bp_init();
+}
- if (c == &boot_cpu_data)
- mtrr_bp_init();
- else
- mtrr_ap_init();
+void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c)
+{
+ BUG_ON(c == &boot_cpu_data);
+ identify_cpu(c);
+ enable_sep_cpu();
+ mtrr_ap_init();
}
#ifdef CONFIG_X86_HT
Index: linux/arch/i386/kernel/smpboot.c
===================================================================
--- linux.orig/arch/i386/kernel/smpboot.c
+++ linux/arch/i386/kernel/smpboot.c
@@ -155,7 +155,7 @@ static void __cpuinit smp_store_cpu_info
*c = boot_cpu_data;
if (id!=0)
- identify_cpu(c);
+ identify_secondary_cpu(c);
/*
* Mask B, Pentium, but not Pentium MMX
*/
Index: linux/arch/i386/kernel/sysenter.c
===================================================================
--- linux.orig/arch/i386/kernel/sysenter.c
+++ linux/arch/i386/kernel/sysenter.c
@@ -72,7 +72,7 @@ extern const char vsyscall_int80_start,
extern const char vsyscall_sysenter_start, vsyscall_sysenter_end;
static struct page *syscall_pages[1];
-int __cpuinit sysenter_setup(void)
+int __init sysenter_setup(void)
{
void *syscall_page = (void *)get_zeroed_page(GFP_ATOMIC);
syscall_pages[0] = virt_to_page(syscall_page);
Index: linux/include/asm-i386/processor.h
===================================================================
--- linux.orig/include/asm-i386/processor.h
+++ linux/include/asm-i386/processor.h
@@ -116,7 +116,8 @@ extern char ignore_fpu_irq;
void __init cpu_detect(struct cpuinfo_x86 *c);
-extern void identify_cpu(struct cpuinfo_x86 *);
+extern void identify_boot_cpu(void);
+extern void identify_secondary_cpu(struct cpuinfo_x86 *);
extern void print_cpu_info(struct cpuinfo_x86 *);
extern unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c);
extern unsigned short num_cache_leaves;
next prev parent reply other threads:[~2007-04-29 23:48 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-29 23:46 [PATCH] [0/26] x86 candidate patches for review IV: more misc patches Andi Kleen
2007-04-29 23:46 ` [PATCH] [1/26] i386: Add smp_ops interface Andi Kleen
2007-04-29 23:46 ` [PATCH] [2/26] i386: Add machine_ops interface to abstract halting and rebooting Andi Kleen
2007-04-29 23:46 ` [PATCH] [4/26] i386: Remove unneeded externs in nmi.c Andi Kleen
2007-04-29 23:46 ` [PATCH] [6/26] x86: fix amd64-agp aperture validation Andi Kleen
2007-04-29 23:46 ` [PATCH] [7/26] x86_64: Use X86_EFLAGS_IF in x86-64/irqflags.h Andi Kleen
2007-04-29 23:46 ` [PATCH] [8/26] x86_64: fix arithmetic in comment Andi Kleen
2007-04-29 23:46 ` [PATCH] [9/26] x86_64: Fix vmalloc_32 to really allocate <4GB on 64bit platforms Andi Kleen
2007-04-30 5:01 ` Borislav Petkov
2007-04-30 5:49 ` Borislav Petkov
2007-04-30 8:59 ` Andi Kleen
2007-04-29 23:46 ` [PATCH] [10/26] i386: Clean up asm-i386/bugs.h Andi Kleen
2007-04-29 23:46 ` Andi Kleen [this message]
2007-04-29 23:46 ` [PATCH] [14/26] x86_64: Clean up asm-x86_64/bugs.h Andi Kleen
2007-04-29 23:46 ` [PATCH] [15/26] x86: Don't use MWAIT on AMD Family 10 Andi Kleen
2007-04-29 23:46 ` [PATCH] [16/26] i386: Enable machine check for " Andi Kleen
2007-04-29 23:46 ` [PATCH] [17/26] i386: Use menuconfig objects - APM Andi Kleen
2007-04-29 23:46 ` [PATCH] [18/26] i386: Update smp_call_function* comments Andi Kleen
2007-04-29 23:46 ` [PATCH] [19/26] i386: Enable bank 0 on non K7 Athlon Andi Kleen
2007-04-30 0:09 ` Dave Jones
2007-04-29 23:46 ` [PATCH] [20/26] x86: Allow percpu variables to be page-aligned Andi Kleen
2007-04-29 23:46 ` [PATCH] [21/26] x86: Clean up x86 control register and MSR macros (corrected) Andi Kleen
2007-04-29 23:46 ` [PATCH] [22/26] i386: Remove smp_alt_instructions Andi Kleen
2007-04-29 23:46 ` [PATCH] [23/26] i386: Allow boot-time disable of SMP altinstructions Andi Kleen
2007-04-29 23:46 ` [PATCH] [24/26] x86_64: Fix x86_64 compilation with DEBUG_SIG on Andi Kleen
2007-04-29 23:46 ` [PATCH] [25/26] x86_64: x86-64 system crashes when no memory populating Node 0 Andi Kleen
2007-04-29 23:46 ` [PATCH] [26/26] i386: i386 separate hardware-defined TSS from Linux additions Andi Kleen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070429234620.6FFCD150F2@wotan.suse.de \
--to=ak@suse.de \
--cc=jeremy@goop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@x86-64.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome