From: David Howells <dhowells@redhat.com>
To: akpm@osdl.org
Cc: linux-kernel@vger.kernel.org, dhowells@redhat.com
Subject: [PATCH 4/4] AFS: Implement shared-writable mmap
Date: Wed, 23 May 2007 20:15:34 +0100 [thread overview]
Message-ID: <20070523191534.24135.72841.stgit@warthog.cambridge.redhat.com> (raw)
In-Reply-To: <20070523191518.24135.81257.stgit@warthog.cambridge.redhat.com>
Implement shared-writable mmap for AFS.
The key with which to access the file is obtained from the VMA at the point
where the PTE is made writable by the page_mkwrite() VMA op and cached in the
affected page.
If there's an outstanding write on the page made with a different key, then
page_mkwrite() will flush it before attaching a record of the new key.
Signed-off-by: David Howells <dhowells@redhat.com>
---
fs/afs/file.c | 21 ++++++++++++++++++++-
fs/afs/internal.h | 1 +
fs/afs/write.c | 35 +++++++++++++++++++++++++++++++++++
3 files changed, 56 insertions(+), 1 deletions(-)
diff --git a/fs/afs/file.c b/fs/afs/file.c
index 9c0e721..1547500 100644
--- a/fs/afs/file.c
+++ b/fs/afs/file.c
@@ -22,6 +22,7 @@ static int afs_readpage(struct file *file, struct page *page);
static void afs_invalidatepage(struct page *page, unsigned long offset);
static int afs_releasepage(struct page *page, gfp_t gfp_flags);
static int afs_launder_page(struct page *page);
+static int afs_mmap(struct file *file, struct vm_area_struct *vma);
const struct file_operations afs_file_operations = {
.open = afs_open,
@@ -31,7 +32,7 @@ const struct file_operations afs_file_operations = {
.write = do_sync_write,
.aio_read = generic_file_aio_read,
.aio_write = afs_file_write,
- .mmap = generic_file_readonly_mmap,
+ .mmap = afs_mmap,
.sendfile = generic_file_sendfile,
.fsync = afs_fsync,
};
@@ -54,6 +55,12 @@ const struct address_space_operations afs_fs_aops = {
.writepages = afs_writepages,
};
+static struct vm_operations_struct afs_file_vm_ops = {
+ .nopage = filemap_nopage,
+ .populate = filemap_populate,
+ .page_mkwrite = afs_page_mkwrite,
+};
+
/*
* open an AFS file or directory and attach a key to it
*/
@@ -293,3 +300,15 @@ static int afs_releasepage(struct page *page, gfp_t gfp_flags)
_leave(" = 0");
return 0;
}
+
+/*
+ * memory map part of an AFS file
+ */
+static int afs_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ _enter("");
+
+ file_accessed(file);
+ vma->vm_ops = &afs_file_vm_ops;
+ return 0;
+}
diff --git a/fs/afs/internal.h b/fs/afs/internal.h
index ddb18d9..bc39eba 100644
--- a/fs/afs/internal.h
+++ b/fs/afs/internal.h
@@ -711,6 +711,7 @@ extern ssize_t afs_file_write(struct kiocb *, const struct iovec *,
unsigned long, loff_t);
extern int afs_writeback_all(struct afs_vnode *);
extern int afs_fsync(struct file *, struct dentry *, int);
+extern int afs_page_mkwrite(struct vm_area_struct *, struct page *);
/*****************************************************************************/
diff --git a/fs/afs/write.c b/fs/afs/write.c
index ac621e8..dd471f0 100644
--- a/fs/afs/write.c
+++ b/fs/afs/write.c
@@ -155,6 +155,8 @@ static int afs_prepare_page(struct afs_vnode *vnode, struct page *page,
* prepare to perform part of a write to a page
* - the caller holds the page locked, preventing it from being written out or
* modified by anyone else
+ * - may be called from afs_page_mkwrite() to set up a page for modification
+ * through shared-writable mmap
*/
int afs_prepare_write(struct file *file, struct page *page,
unsigned offset, unsigned to)
@@ -833,3 +835,36 @@ int afs_fsync(struct file *file, struct dentry *dentry, int datasync)
_leave(" = %d", ret);
return ret;
}
+
+/*
+ * notification that a previously read-only page is about to become writable
+ * - if it returns an error, the caller will deliver a bus error signal
+ *
+ * we use this to make a record of the key with which the writeback should be
+ * performed and to flush any outstanding writes made with a different key
+ *
+ * the key to be used is attached to the struct file pinned by the VMA
+ */
+int afs_page_mkwrite(struct vm_area_struct *vma, struct page *page)
+{
+ struct afs_vnode *vnode = AFS_FS_I(vma->vm_file->f_mapping->host);
+ struct key *key = vma->vm_file->private_data;
+ int ret;
+
+ _enter("{{%x:%u},%x},{%lx}",
+ vnode->fid.vid, vnode->fid.vnode, key_serial(key), page->index);
+
+ do {
+ lock_page(page);
+ if (page->mapping == vma->vm_file->f_mapping)
+ ret = afs_prepare_write(vma->vm_file, page, 0,
+ PAGE_SIZE);
+ else
+ ret = 0; /* seems there was interference - let the
+ * caller deal with it */
+ unlock_page(page);
+ } while (ret == AOP_TRUNCATED_PAGE);
+
+ _leave(" = %d", ret);
+ return ret;
+}
prev parent reply other threads:[~2007-05-23 19:16 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-23 19:15 [PATCH 1/4] AFS: Add TestSetPageError() David Howells
2007-05-23 19:15 ` [PATCH 2/4] AFS: Add a function to excise a rejected write from the pagecache David Howells
2007-05-24 20:38 ` Andrew Morton
2007-05-24 21:35 ` David Howells
2007-05-24 21:47 ` Andrew Morton
2007-05-24 22:34 ` David Howells
2007-05-24 22:46 ` Andrew Morton
2007-05-24 23:08 ` David Howells
2007-05-24 23:24 ` Andrew Morton
2007-05-24 23:37 ` David Howells
2007-05-24 22:35 ` Trond Myklebust
2007-05-24 23:18 ` David Howells
2007-05-24 23:54 ` Trond Myklebust
2007-05-30 10:35 ` David Howells
2007-05-30 17:39 ` Trond Myklebust
2007-05-23 19:15 ` [PATCH 3/4] AFS: Improve handling of a rejected writeback David Howells
2007-05-23 19:15 ` David Howells [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070523191534.24135.72841.stgit@warthog.cambridge.redhat.com \
--to=dhowells@redhat.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®