From: Bjorn Helgaas <bjorn.helgaas@hp.com>
To: Andrey Borzenkov <arvidjaar@mail.ru>
Cc: "Linus Walleij (LD/EAB)" <linus.walleij@ericsson.com>,
"Samuel Ortiz" <samuel@sortiz.org>,
linux-kernel@vger.kernel.org,
"Michal Piotrowski" <michal.k.k.piotrowski@gmail.com>,
ambx1@neo.rr.com
Subject: Re: 2.6.22-rc: regression: no irda0 interface (2.6.21 was OK), smsc does not find chip
Date: Wed, 6 Jun 2007 13:09:28 -0600 [thread overview]
Message-ID: <200706061309.28633.bjorn.helgaas@hp.com> (raw)
In-Reply-To: <200706060729.13338.arvidjaar@mail.ru>
On Tuesday 05 June 2007 09:29:11 pm Andrey Borzenkov wrote:
> On Wednesday 06 June 2007, Bjorn Helgaas wrote:
> > Something's wrong with this strategy. The BIOS is telling us that an
> > SMCf010 device is present, active, and responds at io ports 0x100-0x107
> > and 0x2e8-0x2ef. The fact that it happens to be on the other side of
> > an ISA or LPC bridge should be immaterial to the OS driver.
>
> I thought this as well.
If this is really true, it also means we shouldn't twiddle with the
bridge. If the BIOS left us a working setup, the preconfiguration
is certainly going to change it to something incompatible with the
PNP info.
What if we try the following patch, which keeps the FIR/SIR swap and
just removes the preconfiguration?
Index: linux-2.6/drivers/net/irda/smsc-ircc2.c
===================================================================
--- linux-2.6.orig/drivers/net/irda/smsc-ircc2.c 2007-06-04 10:35:03.000000000 -0600
+++ linux-2.6/drivers/net/irda/smsc-ircc2.c 2007-06-06 13:05:31.000000000 -0600
@@ -232,9 +232,7 @@
#ifdef CONFIG_PCI
static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuration *conf);
static int __init preconfigure_through_82801(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
-static void __init preconfigure_ali_port(struct pci_dev *dev,
unsigned short port);
-static int __init preconfigure_through_ali(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
unsigned short ircc_fir,
unsigned short ircc_sir,
@@ -386,8 +384,8 @@
pnp_dma_valid(dev, 0) && pnp_irq_valid(dev, 0)))
return -EINVAL;
- sirbase = pnp_port_start(dev, 0);
- firbase = pnp_port_start(dev, 1);
+ firbase = pnp_port_start(dev, 0);
+ sirbase = pnp_port_start(dev, 1);
dma = pnp_dma(dev, 0);
irq = pnp_irq(dev, 0);
@@ -2511,20 +2509,6 @@
.preconfigure = preconfigure_through_82801,
.name = "Toshiba laptop with Intel 8281DBM LPC bridge",
},
- {
- /* ALi M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] */
- .vendor = PCIID_VENDOR_ALI,
- .device = 0x1533,
- .subvendor = 0x1179,
- .subdevice = 0xffff, /* 0xffff is "any" */
- .sir_io = 0x02e8,
- .fir_io = 0x02f8,
- .fir_irq = 0x07,
- .fir_dma = 0x03,
- .cfg_base = 0x002e,
- .preconfigure = preconfigure_through_ali,
- .name = "Toshiba laptop with ALi ISA bridge",
- },
{ } // Terminator
};
@@ -2783,63 +2767,6 @@
return preconfigure_smsc_chip(conf);
}
-/*
- * Pre-configure a certain port on the ALi 1533 bridge.
- * This is based on reverse-engineering since ALi does not
- * provide any data sheet for the 1533 chip.
- */
-static void __init preconfigure_ali_port(struct pci_dev *dev,
- unsigned short port)
-{
- unsigned char reg;
- /* These bits obviously control the different ports */
- unsigned char mask;
- unsigned char tmpbyte;
-
- switch(port) {
- case 0x0130:
- case 0x0178:
- reg = 0xb0;
- mask = 0x80;
- break;
- case 0x03f8:
- reg = 0xb4;
- mask = 0x80;
- break;
- case 0x02f8:
- reg = 0xb4;
- mask = 0x30;
- break;
- case 0x02e8:
- reg = 0xb4;
- mask = 0x08;
- break;
- default:
- IRDA_ERROR("Failed to configure unsupported port on ALi 1533 bridge: 0x%04x\n", port);
- return;
- }
-
- pci_read_config_byte(dev, reg, &tmpbyte);
- /* Turn on the right bits */
- tmpbyte |= mask;
- pci_write_config_byte(dev, reg, tmpbyte);
- IRDA_MESSAGE("Activated ALi 1533 ISA bridge port 0x%04x.\n", port);
- return;
-}
-
-static int __init preconfigure_through_ali(struct pci_dev *dev,
- struct
- smsc_ircc_subsystem_configuration
- *conf)
-{
- /* Configure the two ports on the ALi 1533 */
- preconfigure_ali_port(dev, conf->sir_io);
- preconfigure_ali_port(dev, conf->fir_io);
-
- /* Pre-configure chip */
- return preconfigure_smsc_chip(conf);
-}
-
static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
unsigned short ircc_fir,
unsigned short ircc_sir,
next prev parent reply other threads:[~2007-06-06 19:10 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-03 8:00 Andrey Borzenkov
2007-06-03 8:16 ` Andrey Borzenkov
2007-06-03 23:10 ` Samuel Ortiz
2007-06-04 2:33 ` Andrey Borzenkov
2007-06-04 20:44 ` Samuel Ortiz
2007-06-05 3:10 ` Andrey Borzenkov
2007-06-05 7:18 ` Linus Walleij (LD/EAB)
2007-06-05 7:57 ` Samuel Ortiz
2007-06-05 11:57 ` Linus Walleij (LD/EAB)
2007-06-05 13:04 ` Samuel Ortiz
2007-06-05 23:23 ` Bjorn Helgaas
2007-06-06 3:29 ` Andrey Borzenkov
2007-06-06 19:09 ` Bjorn Helgaas [this message]
2007-06-06 20:45 ` Andrey Borzenkov
2007-06-07 15:52 ` Bjorn Helgaas
2007-06-07 20:47 ` Samuel Ortiz
2007-06-10 6:47 ` Andrey Borzenkov
2007-06-10 21:03 ` Bjorn Helgaas
2007-06-11 14:04 ` Andrey Borzenkov
2007-06-14 21:30 ` Bjorn Helgaas
2007-06-15 13:44 ` Andrey Borzenkov
2007-06-15 15:19 ` Bjorn Helgaas
2007-06-16 16:38 ` Andrey Borzenkov
2007-06-19 23:31 ` Bjorn Helgaas
2007-06-28 3:56 ` Bjorn Helgaas
2007-06-30 2:41 ` Bjorn Helgaas
2007-06-30 7:16 ` Andrey Borzenkov
2007-06-30 11:45 ` Bjorn Helgaas
2007-06-30 14:47 ` Andrey Borzenkov
2007-06-30 21:13 ` Andrey Borzenkov
2007-07-01 3:30 ` Bjorn Helgaas
2007-07-01 7:08 ` Andrey Borzenkov
2007-07-01 13:57 ` Bjorn Helgaas
2007-08-11 18:39 ` Andrey Borzenkov
2007-08-13 16:09 ` Bjorn Helgaas
2007-08-13 17:39 ` Peter Stuge
2007-08-18 6:59 ` Andrey Borzenkov
2007-07-01 0:01 ` Michal Piotrowski
2007-07-01 0:04 ` Michal Piotrowski
2007-06-07 18:34 ` Bjorn Helgaas
2007-06-08 5:24 ` Andrey Borzenkov
2007-06-10 8:03 ` Andrey Borzenkov
2007-06-10 20:04 ` Bjorn Helgaas
2007-06-07 12:23 ` Linus Walleij (LD/EAB)
2007-06-07 15:44 ` Bjorn Helgaas
2007-06-05 12:06 ` Linus Walleij (LD/EAB)
2007-06-04 16:34 ` Bjorn Helgaas
2007-06-05 3:08 ` Andrey Borzenkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200706061309.28633.bjorn.helgaas@hp.com \
--to=bjorn.helgaas@hp.com \
--cc=ambx1@neo.rr.com \
--cc=arvidjaar@mail.ru \
--cc=linus.walleij@ericsson.com \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.k.k.piotrowski@gmail.com \
--cc=samuel@sortiz.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®