From: Marc Dietrich <Marc.Dietrich@ap.physik.uni-giessen.de>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: kernel list <linux-kernel@vger.kernel.org>
Subject: Re: Libata PATA status
Date: Wed, 4 Jul 2007 13:31:47 +0200 [thread overview]
Message-ID: <200707041332.00769.marc.dietrich@ap.physik.uni-giessen.de> (raw)
In-Reply-To: <20070704102129.44945ea8@the-village.bc.nu>
Hi Alan,
Am Wednesday 04 July 2007 11:21 schrieben Sie:
> > I'd love to try to poke holes in the libata PATA support, but sadly
> > it doesn't look like any of my systems built-in ATA chipsets are
> > supported yet. Has anyone started a rewrite of the PPC/PowerMac IDE
> > driver? The current one is in "drivers/ide/ppc/pmac.c", and supports
> > these chipsets:
I'm using pata-cmd64x for a few month now on my G3 powermac. So far no
problems except it only runs in UDMA/25 mode instead of UDMA/33 as the ide
driver does. And of course - no cdrom or zip because they are connected to
the Heathrow controller...
scsi0 : pata_cmd64x
scsi1 : pata_cmd64x
ata1: PATA max UDMA/25 cmd 0xfd63d090 ctl 0xfd63d082 bmdma 0xfd63d050 irq 0
ata2: PATA max UDMA/25 cmd 0xfd63d070 ctl 0xfd63d062 bmdma 0xfd63d058 irq 0
ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
ata1.00: ATA-7: SAMSUNG SP1654N, BV100-50, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48
pata_cmd64x: active 3 recovery 1 setup 1.
ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
ata1.00: configured for UDMA/25
scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP1654N BV10 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7
sd 0:0:0:0: [sda] Attached SCSI disk
> I'm not aware of anyone having done any PPC ports yet, although a couple
> of people have asked and said they would look at it. Currently our
> coverage is incomplete for some embedded and obscure platforms, of which
> the macintrash is probably the least 'obscure'.
>
> Alan
Marc
--
"It is a noble cause that we defend and not particular interests."
Lord Arthur Ponsonby, "Falsehood in Wartime: Propaganda Lies of the First
World War", 1928
next prev parent reply other threads:[~2007-07-04 11:47 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-03 17:51 Alan Cox
2007-07-04 3:04 ` Kyle Moffett
2007-07-04 9:21 ` Alan Cox
2007-07-04 11:31 ` Marc Dietrich [this message]
2007-07-04 12:10 ` Alan Cox
2007-07-04 14:18 ` Marc Dietrich
[not found] ` <20070705183355.187e96bc@the-village.bc.nu>
2007-07-06 8:58 ` Marc Dietrich
2007-07-04 13:00 ` Andi Kleen
2007-07-04 12:17 ` Alan Cox
2007-07-04 13:02 ` Andi Kleen
2007-07-04 13:18 ` Alan Cox
2007-07-04 13:29 ` Andi Kleen
2007-07-04 14:23 ` Alan Cox
2007-07-04 12:19 ` Alan Cox
2007-07-05 23:25 ` Jeff Garzik
2007-07-05 22:27 ` Rod Whitby
2007-07-06 9:48 ` Libata PATA status (pata_artop) Michael-Luke Jones
2007-07-04 9:17 Libata PATA status Mikael Pettersson
2007-07-05 8:18 Chris Rankin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200707041332.00769.marc.dietrich@ap.physik.uni-giessen.de \
--to=marc.dietrich@ap.physik.uni-giessen.de \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®