From: Jeff Garzik <jeff@garzik.org>
To: linux-ide@vger.kernel.org
Cc: LKML <linux-kernel@vger.kernel.org>
Subject: [PATCH] libata: Clean up driver udma_mask initializers
Date: Mon, 9 Jul 2007 14:50:58 -0400 [thread overview]
Message-ID: <20070709185058.GA22037@havoc.gtf.org> (raw)
commit 469248abf00dfa813356b372ffe153b85f27f4bf
Author: Jeff Garzik <jeff@garzik.org>
Date: Sun Jul 8 01:13:16 2007 -0400
[libata] Clean up driver udma_mask initializers
* Use ATA_UDMA*
* Remove FIXME notations that once served to remind us to verify
that these were indeed the correct UDMA masks. They are.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
469248abf00dfa813356b372ffe153b85f27f4bf
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index b14e7ef..f66e2a5 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -330,14 +330,14 @@ static const struct ata_port_info ahci_port_info[] = {
{
.flags = AHCI_FLAG_COMMON,
.pio_mask = 0x1f, /* pio0-4 */
- .udma_mask = 0x7f, /* udma0-6 ; FIXME */
+ .udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
},
/* board_ahci_pi */
{
.flags = AHCI_FLAG_COMMON | AHCI_FLAG_HONOR_PI,
.pio_mask = 0x1f, /* pio0-4 */
- .udma_mask = 0x7f, /* udma0-6 ; FIXME */
+ .udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
},
/* board_ahci_vt8251 */
@@ -345,14 +345,14 @@ static const struct ata_port_info ahci_port_info[] = {
.flags = AHCI_FLAG_COMMON | ATA_FLAG_HRST_TO_RESUME |
AHCI_FLAG_NO_NCQ,
.pio_mask = 0x1f, /* pio0-4 */
- .udma_mask = 0x7f, /* udma0-6 ; FIXME */
+ .udma_mask = ATA_UDMA6,
.port_ops = &ahci_vt8251_ops,
},
/* board_ahci_ign_iferr */
{
.flags = AHCI_FLAG_COMMON | AHCI_FLAG_IGN_IRQ_IF_ERR,
.pio_mask = 0x1f, /* pio0-4 */
- .udma_mask = 0x7f, /* udma0-6 ; FIXME */
+ .udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
},
/* board_ahci_sb600 */
@@ -361,7 +361,7 @@ static const struct ata_port_info ahci_port_info[] = {
AHCI_FLAG_IGN_SERR_INTERNAL |
AHCI_FLAG_32BIT_ONLY,
.pio_mask = 0x1f, /* pio0-4 */
- .udma_mask = 0x7f, /* udma0-6 ; FIXME */
+ .udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
},
};
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 78bdfd0..2ad5872 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -250,7 +250,7 @@ static const struct ata_port_info pdc_port_info[] = {
PDC_FLAG_SATA_PATA,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
- .udma_mask = 0x7f, /* udma0-6 ; FIXME */
+ .udma_mask = ATA_UDMA6,
.port_ops = &pdc_old_sata_ops,
},
@@ -259,7 +259,7 @@ static const struct ata_port_info pdc_port_info[] = {
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
- .udma_mask = 0x7f, /* udma0-6 ; FIXME */
+ .udma_mask = ATA_UDMA6,
.port_ops = &pdc_pata_ops,
},
@@ -269,7 +269,7 @@ static const struct ata_port_info pdc_port_info[] = {
PDC_FLAG_4_PORTS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
- .udma_mask = 0x7f, /* udma0-6 ; FIXME */
+ .udma_mask = ATA_UDMA6,
.port_ops = &pdc_old_sata_ops,
},
@@ -279,7 +279,7 @@ static const struct ata_port_info pdc_port_info[] = {
PDC_FLAG_4_PORTS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
- .udma_mask = 0x7f, /* udma0-6 ; FIXME */
+ .udma_mask = ATA_UDMA6,
.port_ops = &pdc_pata_ops,
},
@@ -289,7 +289,7 @@ static const struct ata_port_info pdc_port_info[] = {
PDC_FLAG_GEN_II | PDC_FLAG_SATA_PATA,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
- .udma_mask = 0x7f, /* udma0-6 ; FIXME */
+ .udma_mask = ATA_UDMA6,
.port_ops = &pdc_sata_ops,
},
@@ -299,7 +299,7 @@ static const struct ata_port_info pdc_port_info[] = {
PDC_FLAG_GEN_II,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
- .udma_mask = 0x7f, /* udma0-6 ; FIXME */
+ .udma_mask = ATA_UDMA6,
.port_ops = &pdc_pata_ops,
},
@@ -309,7 +309,7 @@ static const struct ata_port_info pdc_port_info[] = {
PDC_FLAG_GEN_II | PDC_FLAG_4_PORTS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
- .udma_mask = 0x7f, /* udma0-6 ; FIXME */
+ .udma_mask = ATA_UDMA6,
.port_ops = &pdc_sata_ops,
},
};
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index 3d83ee2..5193bd8 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -279,7 +279,7 @@ static const struct ata_port_info pdc_port_info[] = {
ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
- .udma_mask = 0x7f, /* udma0-6 ; FIXME */
+ .udma_mask = ATA_UDMA6,
.port_ops = &pdc_20621_ops,
},
reply other threads:[~2007-07-09 18:51 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070709185058.GA22037@havoc.gtf.org \
--to=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®