From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932829AbXGLMJh (ORCPT ); Thu, 12 Jul 2007 08:09:37 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932620AbXGLMIo (ORCPT ); Thu, 12 Jul 2007 08:08:44 -0400 Received: from rex.snapgear.com ([203.143.235.140]:38178 "EHLO snapgear.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1764685AbXGLMIl (ORCPT ); Thu, 12 Jul 2007 08:08:41 -0400 Date: Thu, 12 Jul 2007 22:07:50 +1000 From: Greg Ungerer Message-Id: <200707121207.l6CC7oLh026562@goober> To: torvalds@linux-foundation.org Subject: [M68KNOMMU]: remove cruft from setup code Cc: gerg@uclinux.org, linux-kernel@vger.kernel.org Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Clean up the m68knommu/kernel/setup.c. It is just full of old junk. . removed unused includes . removed unused conditional code (with unused defines) . removed unused code . removed unused function prototypes and variables . remove old/wrong comments . retabed code that was inconsistently formated . correct copyrights Signed-off-by: Greg Ungerer --- diff -Naur linux-2.6.22/arch/m68knommu/kernel/setup.c linux-2.6.22-uc0/arch/m68knommu/kernel/setup.c --- linux-2.6.22/arch/m68knommu/kernel/setup.c 2007-07-12 15:23:02.000000000 +1000 +++ linux-2.6.22-uc0/arch/m68knommu/kernel/setup.c 2007-07-12 15:27:00.000000000 +1000 @@ -1,8 +1,8 @@ /* * linux/arch/m68knommu/kernel/setup.c * - * Copyright (C) 1999-2004 Greg Ungerer (gerg@snapgear.com) - * Copyright (C) 1998,1999 D. Jeff Dionne + * Copyright (C) 1999-2007 Greg Ungerer (gerg@snapgear.com) + * Copyright (C) 1998,1999 D. Jeff Dionne * Copyleft ()) 2000 James D. Schettine {james@telos-systems.com} * Copyright (C) 1998 Kenneth Albanowski * Copyright (C) 1995 Hamish Macdonald @@ -20,17 +20,13 @@ #include #include #include -#include #include #include #include -#include #include #include -#include #include #include -#include #include #include @@ -46,34 +42,14 @@ char __initdata command_line[COMMAND_LINE_SIZE]; -/* setup some dummy routines */ -static void dummy_waitbut(void) -{ -} - -void (*mach_sched_init) (irq_handler_t handler); -void (*mach_tick)( void ); -/* machine dependent keyboard functions */ -int (*mach_keyb_init) (void); -int (*mach_kbdrate) (struct kbd_repeat *); -void (*mach_kbd_leds) (unsigned int); -/* machine dependent irq functions */ -void (*mach_init_IRQ) (void); -irq_handler_t mach_default_handler; -int (*mach_get_irq_list) (struct seq_file *, void *); -void (*mach_process_int) (int irq, struct pt_regs *fp); -void (*mach_trap_init) (void); /* machine dependent timer functions */ -unsigned long (*mach_gettimeoffset) (void); -void (*mach_gettod) (int*, int*, int*, int*, int*, int*); -int (*mach_hwclk) (int, struct rtc_time*); -int (*mach_set_clock_mmss) (unsigned long); -void (*mach_mksound)( unsigned int count, unsigned int ticks ); -void (*mach_reset)( void ); -void (*waitbut)(void) = dummy_waitbut; -void (*mach_debug_init)(void); -void (*mach_halt)( void ); -void (*mach_power_off)( void ); +void (*mach_gettod)(int*, int*, int*, int*, int*, int*); +int (*mach_set_clock_mmss)(unsigned long); + +/* machine dependent reboot functions */ +void (*mach_reset)(void); +void (*mach_halt)(void); +void (*mach_power_off)(void); #ifdef CONFIG_M68000 @@ -134,13 +110,6 @@ #define CPU "UNKNOWN" #endif -/* (es) */ -/* note: why is this defined here? the must be a better place to put this */ -#if defined( CONFIG_TELOS) || defined( CONFIG_UCDIMM ) || defined( CONFIG_UCSIMM ) || defined(CONFIG_DRAGEN2) || (defined( CONFIG_PILOT ) && defined( CONFIG_M68328 )) -#define CAT_ROMARRAY -#endif -/* (/es) */ - extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end; extern int _ramstart, _ramend; @@ -148,15 +117,8 @@ { int bootmap_size; -#if defined(CAT_ROMARRAY) && defined(DEBUG) - extern int __data_rom_start; - extern int __data_start; - int *romarray = (int *)((int) &__data_rom_start + - (int)&_edata - (int)&__data_start); -#endif - memory_start = PAGE_ALIGN(_ramstart); - memory_end = _ramend; /* by now the stack is part of the init task */ + memory_end = _ramend; init_mm.start_code = (unsigned long) &_stext; init_mm.end_code = (unsigned long) &_etext; @@ -218,15 +185,9 @@ "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext, (int) &_sdata, (int) &_edata, (int) &_sbss, (int) &_ebss); - printk(KERN_DEBUG "KERNEL -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x " - "STACK=0x%06x-0x%06x\n", -#ifdef CAT_ROMARRAY - (int) romarray, ((int) romarray) + romarray[2], -#else + printk(KERN_DEBUG "MEMORY -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x\n ", (int) &_ebss, (int) memory_start, -#endif - (int) memory_start, (int) memory_end, - (int) memory_end, (int) _ramend); + (int) memory_start, (int) memory_end); #endif /* Keep a copy of command line */ @@ -268,32 +229,33 @@ /* * Get CPU information for use by the procfs. */ - static int show_cpuinfo(struct seq_file *m, void *v) { - char *cpu, *mmu, *fpu; - u_long clockfreq; + char *cpu, *mmu, *fpu; + u_long clockfreq; - cpu = CPU; - mmu = "none"; - fpu = "none"; + cpu = CPU; + mmu = "none"; + fpu = "none"; #ifdef CONFIG_COLDFIRE - clockfreq = (loops_per_jiffy*HZ)*3; + clockfreq = (loops_per_jiffy * HZ) * 3; #else - clockfreq = (loops_per_jiffy*HZ)*16; + clockfreq = (loops_per_jiffy * HZ) * 16; #endif - seq_printf(m, "CPU:\t\t%s\n" - "MMU:\t\t%s\n" - "FPU:\t\t%s\n" - "Clocking:\t%lu.%1luMHz\n" - "BogoMips:\t%lu.%02lu\n" - "Calibration:\t%lu loops\n", - cpu, mmu, fpu, - clockfreq/1000000,(clockfreq/100000)%10, - (loops_per_jiffy*HZ)/500000,((loops_per_jiffy*HZ)/5000)%100, - (loops_per_jiffy*HZ)); + seq_printf(m, "CPU:\t\t%s\n" + "MMU:\t\t%s\n" + "FPU:\t\t%s\n" + "Clocking:\t%lu.%1luMHz\n" + "BogoMips:\t%lu.%02lu\n" + "Calibration:\t%lu loops\n", + cpu, mmu, fpu, + clockfreq / 1000000, + (clockfreq / 100000) % 10, + (loops_per_jiffy * HZ) / 500000, + ((loops_per_jiffy * HZ) / 5000) % 100, + (loops_per_jiffy * HZ)); return 0; } @@ -320,12 +282,3 @@ .show = show_cpuinfo, }; -void arch_gettod(int *year, int *mon, int *day, int *hour, - int *min, int *sec) -{ - if (mach_gettod) - mach_gettod(year, mon, day, hour, min, sec); - else - *year = *mon = *day = *hour = *min = *sec = 0; -} -