From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1762843AbXGPAU6 (ORCPT ); Sun, 15 Jul 2007 20:20:58 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1756835AbXGPAUu (ORCPT ); Sun, 15 Jul 2007 20:20:50 -0400 Received: from pxy2nd.nifty.com ([202.248.175.14]:55084 "HELO pxy2nd.nifty.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1756054AbXGPAUt (ORCPT ); Sun, 15 Jul 2007 20:20:49 -0400 X-Nifty-SrcIP: [210.170.245.86] DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=pxy2nd-default; d=mbf.nifty.com; b=ZzyNellEqSlMMgJVG5Fh4B7GcdhBuuEy055EhSZjccEbqk+yeFWbggn3WYmyCEb4JGtdXdvaQw8syMZEDmsIWg== ; Date: Mon, 16 Jul 2007 09:19:28 +0900 (JST) Message-Id: <20070716.091928.111205836.takada@mbf.nifty.com> To: alan@lxorguk.ukuu.org.uk Cc: linux-kernel@vger.kernel.org Subject: Re: i386: pata_cs5520 does not work From: TAKADA Yoshihito In-Reply-To: <20070715183924.0a6c992b@the-village.bc.nu> References: <20070716.014115.193701589.takada@mbf.nifty.com> <20070715183924.0a6c992b@the-village.bc.nu> X-Mailer: Mew version 5.1 on Emacs 22.1.50 / Mule 5.0 (SAKAKI) Mime-Version: 1.0 Content-Type: Multipart/Mixed; boundary="--Next_Part(Mon_Jul_16_09_19_28_2007_000)--" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org ----Next_Part(Mon_Jul_16_09_19_28_2007_000)-- Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit From: Alan Cox Subject: Re: i386: pata_cs5520 does not work Date: Sun, 15 Jul 2007 18:39:24 +0100 > On Mon, 16 Jul 2007 01:41:15 +0900 (JST) > TAKADA Yoshihito wrote: > > > Hi. > > I update to 2.6.22.1 from 2.6.21.5. And PC cannot mount /. > > It seems pata_cs5520 does not find IDE controller. > > (I don't have serial cable for CS5520 board now. I cannt read > > boot messages.) > > 2.6.21 is OK. > > In 2.6.22, IDE driver is OK. > > Is any information necessary? > > I'll take a look at this next week. Can you send me a dmesg of the > working case and an lspci -vvxxx Thanks. attached 2 dmesgs(2.6.21 with pata_cs5520, 2.6.22 with IDE) and output of lspci. ----Next_Part(Mon_Jul_16_09_19_28_2007_000)-- Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg-2.6.21" Linux version 2.6.21.5-ss2 (bee@mpc101) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #2 PREEMPT Wed Jun 27 11:01:48 JST 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 0000000005c80000 end: 0000000005d80000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000005d80000 (usable) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 93MB LOWMEM available. Entering add_active_range(0, 0, 23936) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 23936 early_node_map[1] active PFN ranges 0: 0 -> 23936 On node 0 totalpages: 23936 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 155 pages used for memmap Normal zone: 19685 pages, LIFO batch:3 DMI not present or invalid. Allocating PCI resources starting at 10000000 (gap: 05d80000:fa270000) Built 1 zonelists. Total pages: 23749 Kernel command line: ro root=/dev/sda2 5 Initializing CPU#0 PID hash table entries: 512 (order: 9, 2048 bytes) Detected 199.746 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 90184k/95744k available (1866k kernel code, 5104k reserved, 743k data, 140k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffffd000 - 0xfffff000 ( 8 kB) vmalloc : 0xc6800000 - 0xffffb000 ( 919 MB) lowmem : 0xc0000000 - 0xc5d80000 ( 93 MB) .init : 0xc0390000 - 0xc03b3000 ( 140 kB) .data : 0xc02d2afd - 0xc038c934 ( 743 kB) .text : 0xc0100000 - 0xc02d2afd (1866 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 403.39 BogoMIPS (lpj=672636) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 00808131 01818131 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 00808131 01818131 00000000 00000000 00000000 00000000 00000000 Working around Cyrix MediaGX virtual DMA bugs. Enable Memory-Write-back mode on Cyrix/NSC processor. Enable Memory access reorder on Cyrix/NSC processor. Enable Incrementor on Cyrix/NSC processor. CPU: After all inits, caps: 00808131 00818131 00000000 00000001 00000000 00000000 00000000 CPU: Cyrix MediaGXtm MMXtm Enhanced stepping 02 Checking 'hlt' instruction... OK. Device driver platform lacks bus and class support for being resumed. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb9a0, last bus=0 PCI: Using configuration type 1 Setting up standard PCI resources SCSI subsystem initialized libata version 2.20 loaded. usbcore: registered new interface driver usbfs USB driver usbfs lacks resume support. usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Device driver pci0000:00 lacks bus and class support for being resumed. PCI: Using IRQ router default [1078/0001] at 0000:00:00.0 Time: tsc clocksource has been installed. PCI: Bus 1, cardbus bridge: 0000:00:01.0 IO window: 00001000-000010ff IO window: 00001400-000014ff PREFETCH window: 10000000-13ffffff MEM window: 14000000-17ffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered checking if image is initramfs... it is apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) audit: initializing netlink socket (disabled) audit(1184538063.539:1): initialized io scheduler noop registered io scheduler deadline registered (default) Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Clocksource tsc unstable (delta = -137554893 ns) Time: pit clocksource has been installed. serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A Device driver isa lacks bus and class support for being resumed. RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Device driver lo lacks bus and class support for being resumed. PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered ata1: PATA max PIO4 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00015000 irq 14 scsi0 : pata_cs5520 Device driver host0 lacks bus and class support for being resumed. ata1.00: ATA-5: IC25N030ATCS04-0, CA3OA71A, max UDMA/100 ata1.00: 58605120 sectors, multi 16: LBA ata1.00: configured for PIO4 Device driver target0:0:0 lacks bus and class support for being resumed. scsi 0:0:0:0: Direct-Access ATA IC25N030ATCS04-0 CA3O PQ: 0 ANSI: 5 SCSI device sda: 58605120 512-byte hdwr sectors (30006 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 58605120 512-byte hdwr sectors (30006 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda Yenta: CardBus bridge found at 0000:00:01.0 [0000:0000] Yenta: ISA IRQ mask 0x0eb8, PCI irq 15 Socket status: 30000820 Device driver pcmcia_socket0 lacks bus and class support for being resumed. ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:13.0: irq 15, io mem 0xe0000000 Device driver usbdev1.1_ep00 lacks bus and class support for being resumed. usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Device driver usbdev1.1_ep81 lacks bus and class support for being resumed. Initializing USB Mass Storage driver... usb 1-1: new full speed USB device using ohci_hcd and address 2 Device driver usbdev1.2_ep00 lacks bus and class support for being resumed. usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected pccard: CardBus card inserted into slot 0 Device driver usbdev1.2_ep81 lacks bus and class support for being resumed. usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver hiddev USB driver hiddev lacks resume support. usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode Suspend v2.2.10 Suspend2 Userspace Storage Manager support registered. Suspend2 Basic User Interface support registered. Suspend2 Compressor support registered. Suspend2 Block I/O support registered. Suspend2 Swap Allocator support registered. No storage allocator is currently active. Rechecking whether we can use one. Suspend2: SwapAllocator: Signature found. Suspend2: Resuming enabled. Suspend2: Normal swapspace found. Synaptics Touchpad, model: 1, fw: 4.6, id: 0xb5aa1, caps: 0x804710/0x0 input: SynPS/2 Synaptics TouchPad as /class/input/input1 ReiserFS: sda2: found reiserfs format "3.6" with standard journal ReiserFS: sda2: using ordered data mode ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda2: checking transaction log (sda2) ReiserFS: sda2: Using r5 hash to sort names 8139too Fast Ethernet driver 0.9.28 PCI: Enabling device 0000:01:00.0 (0000 -> 0003) PCI: Setting latency timer of device 0000:01:00.0 to 64 Device driver eth0 lacks bus and class support for being resumed. eth0: RealTek RTL8139 at 0x1000, 00:90:99:48:a0:30, IRQ 15 eth0: Identified 8139 chip type 'RTL-8139C' cs: IO port probe 0x100-0x3af: excluding 0x1f0-0x1f7 0x378-0x37f 0x398-0x39f cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3ff 0x480-0x48f 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. sd 0:0:0:0: Attached scsi generic sg0 type 0 Adding 265032k swap on /dev/sda1. Priority:-1 extents:1 across:265032k ----Next_Part(Mon_Jul_16_09_19_28_2007_000)-- Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg-2.6.22" Linux version 2.6.22.1-ss2 (bee@celeron) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-13)) #7 PREEMPT Mon Jul 16 01:29:15 JST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000005d80000 (usable) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 93MB LOWMEM available. Entering add_active_range(0, 0, 23936) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 23936 early_node_map[1] active PFN ranges 0: 0 -> 23936 On node 0 totalpages: 23936 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 155 pages used for memmap Normal zone: 19685 pages, LIFO batch:3 DMI not present or invalid. Allocating PCI resources starting at 10000000 (gap: 05d80000:fa270000) Built 1 zonelists. Total pages: 23749 Kernel command line: ro root=/dev/hda2 resume2=swap:/dev/hda1 5 Initializing CPU#0 PID hash table entries: 512 (order: 9, 2048 bytes) Detected 199.745 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 89932k/95744k available (2033k kernel code, 5360k reserved, 804k data, 144k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffffd000 - 0xfffff000 ( 8 kB) vmalloc : 0xc6800000 - 0xffffb000 ( 919 MB) lowmem : 0xc0000000 - 0xc5d80000 ( 93 MB) .init : 0xc03c8000 - 0xc03ec000 ( 144 kB) .data : 0xc02fc7bd - 0xc03c5ba4 ( 804 kB) .text : 0xc0100000 - 0xc02fc7bd (2033 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Calibrating delay using timer specific routine.. 401.39 BogoMIPS (lpj=2006979) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 00808131 01818131 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 00808131 01818131 00000000 00000000 00000000 00000000 00000000 Working around Cyrix MediaGX virtual DMA bugs. Enable Memory-Write-back mode on Cyrix/NSC processor. Enable Memory access reorder on Cyrix/NSC processor. Enable Incrementor on Cyrix/NSC processor. CPU: After all inits, caps: 00808131 00818131 00000000 00000001 00000000 00000000 00000000 Compat vDSO mapped to ffffe000. CPU: Cyrix MediaGXtm MMXtm Enhanced stepping 02 Checking 'hlt' instruction... OK. Device driver platform lacks bus and class support for being resumed. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb9a0, last bus=0 PCI: Using configuration type 1 Setting up standard PCI resources SCSI subsystem initialized libata version 2.21 loaded. usbcore: registered new interface driver usbfs USB driver usbfs lacks resume support. usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Device driver pci0000:00 lacks bus and class support for being resumed. PCI: Using IRQ router default [1078/0001] at 0000:00:00.0 Time: tsc clocksource has been installed. PCI: Bus 1, cardbus bridge: 0000:00:01.0 IO window: 00001000-000010ff IO window: 00001400-000014ff PREFETCH window: 10000000-13ffffff MEM window: 14000000-17ffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered checking if image is initramfs... it is apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) audit: initializing netlink socket (disabled) audit(1184537602.310:1): initialized io scheduler noop registered io scheduler deadline registered (default) Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A Device driver isa lacks bus and class support for being resumed. RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: module loaded Device driver lo lacks bus and class support for being resumed. PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Cyrix 5520: IDE controller at PCI slot 0000:00:12.0 ide0: BM-DMA at 0x5000-0x5007, BIOS settings: hda:pio, hdb:DMA ide1: BM-DMA at 0x5008-0x500f, BIOS settings: hdc:pio, hdd:DMA Probing IDE interface ide0... hda: IC25N030ATCS04-0, ATA DISK drive Device driver ide0 lacks bus and class support for being resumed. Clocksource tsc unstable (delta = -110575101 ns) Time: pit clocksource has been installed. PIO clocking = 4 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... PCI driver Cyrix_IDE lacks driver specific resume support. PCI driver PCI_IDE lacks driver specific resume support. Probing IDE interface ide1... hda: max request size: 128KiB hda: 58605120 sectors (30005 MB) w/1768KiB Cache, CHS=58140/16/63 hda: cache flushes not supported hda: hda1 hda2 hda3 Yenta: CardBus bridge found at 0000:00:01.0 [0000:0000] Yenta: ISA IRQ mask 0x0eb8, PCI irq 15 Socket status: 30000820 Device driver pcmcia_socket0 lacks bus and class support for being resumed. ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:13.0: irq 15, io mem 0xe0000000 Device driver usbdev1.1_ep00 lacks bus and class support for being resumed. usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Device driver usbdev1.1_ep81 lacks bus and class support for being resumed. Initializing USB Mass Storage driver... usb 1-1: new full speed USB device using ohci_hcd and address 2 Device driver usbdev1.2_ep00 lacks bus and class support for being resumed. usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected pccard: CardBus card inserted into slot 0 Device driver usbdev1.2_ep81 lacks bus and class support for being resumed. usbcore: registered new interface driver usb-storage USB Mass Storage support registered. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 usbcore: registered new interface driver hiddev USB driver hiddev lacks resume support. usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode Suspend v2.2.10 Suspend2 Userspace Storage Manager support registered. Suspend2 Basic User Interface support registered. Suspend2 Compressor support registered. Suspend2 Block I/O support registered. Suspend2 Swap Allocator support registered. No storage allocator is currently active. Rechecking whether we can use one. Suspend2: SwapAllocator: Signature found. Suspend2: Resuming enabled. Suspend2: Normal swapspace found. Synaptics Touchpad, model: 1, fw: 4.6, id: 0xb5aa1, caps: 0x804710/0x0 input: SynPS/2 Synaptics TouchPad as /class/input/input1 ReiserFS: hda2: found reiserfs format "3.6" with standard journal ReiserFS: hda2: using ordered data mode ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda2: checking transaction log (hda2) ReiserFS: hda2: Using r5 hash to sort names 8139too Fast Ethernet driver 0.9.28 PCI: Enabling device 0000:01:00.0 (0000 -> 0003) PCI: Setting latency timer of device 0000:01:00.0 to 64 Device driver eth0 lacks bus and class support for being resumed. eth0: RealTek RTL8139 at 0x1000, 00:90:99:48:a0:30, IRQ 15 eth0: Identified 8139 chip type 'RTL-8139C' cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f 0x398-0x39f cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. Adding 265032k swap on /dev/hda1. Priority:-1 extents:1 across:265032k PIO clocking = 4 ----Next_Part(Mon_Jul_16_09_19_28_2007_000)-- Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename=lspci-vvxxx 00:00.0 Host bridge: Cyrix Corporation PCI Master Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Reset- 16bInt- PostWrite+ 16-bit legacy interface ports at 0001 00: 80 11 75 04 07 00 10 02 00 00 07 06 00 a8 02 00 10: 00 00 00 18 dc 00 00 02 00 01 04 b0 00 00 00 10 20: 00 f0 ff 13 00 00 00 14 00 f0 ff 17 00 10 00 00 30: fc 10 00 00 00 14 00 00 fc 14 00 00 0f 01 00 05 40: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:12.0 ISA bridge: Cyrix Corporation 5520 [Cognac] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- 00: 59 12 17 a1 07 00 90 02 10 00 00 02 00 40 00 00 10: 01 10 00 00 00 00 00 14 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 02 01 00 00 59 12 17 a1 30: 00 00 00 00 50 00 00 00 00 00 00 00 0f 01 20 40 ----Next_Part(Mon_Jul_16_09_19_28_2007_000)----