From: "Mark M. Hoffman" <mhoffman@lightlink.com>
To: Linus Torvalds <torvalds@osdl.org>,
Andrew Morton <akpm@linux-foundation.org>
Cc: LKML <linux-kernel@vger.kernel.org>,
lm-sensors <lm-sensors@lm-sensors.org>
Subject: [GIT PATCH] hwmon patches against 2.6.22
Date: Thu, 19 Jul 2007 14:42:41 -0400 [thread overview]
Message-ID: <20070719184241.GF3406@jupiter.solarsys.private> (raw)
Hi Linus:
Updates to the hwmon subsystem are ready...
Please pull from:
git://lm-sensors.org/kernel/mhoffman/hwmon-2.6.git release
You'll get several new drivers, conversion of several existing drivers to
use the platform device model, and various bugfixes and enhancements.
The last commit removes i2c-isa. Jean Delvare asked me to pass this on to you
due to the fact that all the prerequisites are in this tree anyway.
All of these patches have spent some time in -mm, as well.
Thanks & regards,
Documentation/feature-removal-schedule.txt | 9 -
Documentation/hwmon/abituguru | 31 +-
Documentation/hwmon/abituguru3 | 65 +
Documentation/hwmon/dme1737 | 257 +++
Documentation/hwmon/f71805f | 35 +-
Documentation/hwmon/it87 | 9 +-
Documentation/hwmon/lm90 | 36 +-
Documentation/hwmon/lm93 | 412 +++++
Documentation/hwmon/smsc47b397 | 7 +-
Documentation/hwmon/sysfs-interface | 15 +-
Documentation/hwmon/w83627ehf | 6 +-
MAINTAINERS | 36 +-
arch/arm/configs/badge4_defconfig | 1 -
arch/arm/configs/clps7500_defconfig | 1 -
arch/arm/configs/footbridge_defconfig | 1 -
arch/arm/configs/neponset_defconfig | 1 -
arch/arm/configs/picotux200_defconfig | 1 -
arch/arm/configs/rpc_defconfig | 1 -
arch/arm/configs/s3c2410_defconfig | 1 -
arch/m32r/m32104ut/defconfig.m32104ut | 1 -
arch/ppc/configs/ev64260_defconfig | 1 -
arch/ppc/configs/mpc8540_ads_defconfig | 1 -
arch/ppc/configs/mpc8548_cds_defconfig | 1 -
arch/ppc/configs/mpc8555_cds_defconfig | 1 -
arch/ppc/configs/mpc8560_ads_defconfig | 1 -
arch/ppc/configs/radstone_ppc7d_defconfig | 1 -
arch/ppc/configs/stx_gp3_defconfig | 1 -
arch/ppc/configs/sycamore_defconfig | 1 -
drivers/hwmon/Kconfig | 82 +-
drivers/hwmon/Makefile | 3 +
drivers/hwmon/abituguru.c | 45 +-
drivers/hwmon/abituguru3.c | 1140 ++++++++++++
drivers/hwmon/coretemp.c | 2 +-
drivers/hwmon/dme1737.c | 2080 ++++++++++++++++++++++
drivers/hwmon/ds1621.c | 161 +-
drivers/hwmon/f71805f.c | 178 ++-
drivers/hwmon/it87.c | 497 +++---
drivers/hwmon/lm63.c | 4 +-
drivers/hwmon/lm83.c | 12 +-
drivers/hwmon/lm90.c | 78 +-
drivers/hwmon/lm93.c | 2655 ++++++++++++++++++++++++++++
drivers/hwmon/pc87360.c | 232 ++-
drivers/hwmon/pc87427.c | 2 +-
drivers/hwmon/sis5595.c | 510 +++---
drivers/hwmon/smsc47b397.c | 7 +-
drivers/hwmon/smsc47m1.c | 12 +-
drivers/hwmon/smsc47m192.c | 37 +-
drivers/hwmon/via686a.c | 538 +++---
drivers/hwmon/vt8231.c | 318 ++--
drivers/hwmon/w83627ehf.c | 615 ++++---
drivers/hwmon/w83627hf.c | 153 ++-
drivers/i2c/busses/Kconfig | 3 -
drivers/i2c/busses/Makefile | 1 -
drivers/i2c/busses/i2c-isa.c | 192 --
drivers/i2c/i2c-core.c | 2 -
include/linux/i2c-isa.h | 36 -
include/linux/i2c.h | 1 -
57 files changed, 8809 insertions(+), 1721 deletions(-)
create mode 100644 Documentation/hwmon/abituguru3
create mode 100644 Documentation/hwmon/dme1737
create mode 100644 Documentation/hwmon/lm93
create mode 100644 drivers/hwmon/abituguru3.c
create mode 100644 drivers/hwmon/dme1737.c
create mode 100644 drivers/hwmon/lm93.c
delete mode 100644 drivers/i2c/busses/i2c-isa.c
delete mode 100644 include/linux/i2c-isa.h
Adrian Bunk (1):
make coretemp_device_remove() static
Carlos Olalla Martinez (1):
hwmon/w83627hf: Add PWM frequency selection support
David Hubbard (3):
hwmon/w83627ehf: Update the Kconfig entry
hwmon/w83627ehf: Convert to a platform driver
hwmon/w83627ehf: Add error messages for two error cases
Hans de Goede (4):
hwmon: fix detection of abituguru volt inputs
hwmon: Add support for newer uGuru's
hwmon: fix Abit Uguru3 driver detection on some motherboards
hwmon: refuse to load abituguru driver on non-Abit boards
Hans-Jürgen Koch (1):
hwmon: Add LM93 support
Jean Delvare (25):
hwmon/lm90: Spelling fix: explicitly
hwmon/smsc47m192: Semaphore to mutex conversion
hwmon/ds1621: Minor cleanups
hwmon/ds1621: Use dynamic sysfs callbacks
hwmon/ds1621: Create individual alarm files
hwmon/pc87360: Convert to a platform driver
hwmon: Use platform_device_add_data()
hwmon: Fault files naming convention
hwmon/via686a: Temperature interrupt configuration fix
hwmon/via686a: Convert to a platform driver
hwmon/via686a: Use dynamic sysfs callbacks
hwmon/sis5595: Convert to a platform driver
hwmon/sis5595: Use dynamic sysfs callbacks
hwmon/sis5595: Use PCI_REVISION_ID
hwmon: Fix a potential race condition on unload
hwmon/w83627ehf: Preserve speed reading when changing fan min
hwmon/smsc47b397: Don't report missing fans as spinning at 82 RPM
hwmon: Improve the pwmN_enable documentation
hwmon/w83627ehf: Fix timing issues
hwmon/w83627ehf: Add support for the VID inputs
hwmon/w83627ehf: Enable VBAT monitoring
hwmon/w83627ehf: Export the thermal sensor types
hwmon/w83627ehf: No need to initialize fan_min
hwmon/w83627ehf: Be quiet when no chip is found
i2c: Delete the i2c-isa pseudo bus driver
Juerg Haefliger (3):
hwmon: New SMSC DME1737 driver
hwmon/dme1737: Add documentation
hwmon: add SCH5317 to smsc47b397 driver
Mark M. Hoffman (1):
hwmon: New maintainer
Phil Endecott (1):
hwmon/f71805f: Add temperature-tracking fan control mode
Rainer Birkenmaier (1):
hwmon/lm90: Add support for the Maxim MAX6680/MAX6681
Roger Lucas (1):
hwmon: Convert vt8231 to a platform driver
Rudolf Marek (1):
hwmon/it87: Add IT8726F support
corentin.labbe (1):
hwmon: convert it87 to platform driver
--
Mark M. Hoffman
mhoffman@lightlink.com
reply other threads:[~2007-07-19 18:46 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070719184241.GF3406@jupiter.solarsys.private \
--to=mhoffman@lightlink.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®