From: "Dale Farnsworth" <dale@farnsworth.org>
To: Wim Van Sebroeck <wim@iguana.be>, linux-kernel@vger.kernel.org
Subject: [PATCH 06/11] mv64x60_wdt: Support for WDIOC_SETTIMEOUT ioctl
Date: Tue, 24 Jul 2007 11:15:26 -0700 [thread overview]
Message-ID: <20070724181526.GF27445@xyzzy.farnsworth.org> (raw)
In-Reply-To: <20070724180738.GA27445@xyzzy.farnsworth.org>
Add the ability to modify the watchdog timer timeout interval.
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
---
drivers/char/watchdog/mv64x60_wdt.c | 38 +++++++++++++++++++++-----
1 file changed, 31 insertions(+), 7 deletions(-)
Index: linux-2.6-powerpc-wdt/drivers/char/watchdog/mv64x60_wdt.c
===================================================================
--- linux-2.6-powerpc-wdt.orig/drivers/char/watchdog/mv64x60_wdt.c 2007-07-20 19:32:08.000000000 +0000
+++ linux-2.6-powerpc-wdt/drivers/char/watchdog/mv64x60_wdt.c 2007-07-20 19:42:01.000000000 +0000
@@ -43,6 +43,7 @@ static unsigned long wdt_flags;
static int wdt_status;
static void __iomem *mv64x60_wdt_regs;
static int mv64x60_wdt_timeout;
+static unsigned int bus_clk;
static void mv64x60_wdt_reg_write(u32 val)
{
@@ -82,6 +83,18 @@ static void mv64x60_wdt_handler_enable(v
}
}
+static void mv64x60_wdt_set_timeout(int timeout)
+{
+ /* maximum bus cycle count is 0xFFFFFFFF */
+ if (timeout > 0xFFFFFFFF / bus_clk)
+ timeout = 0xFFFFFFFF / bus_clk;
+
+ mv64x60_wdt_timeout = timeout;
+ writel((timeout * bus_clk) >> 8,
+ mv64x60_wdt_regs + MV64x60_WDT_WDC_OFFSET);
+ mv64x60_wdt_service();
+}
+
static int mv64x60_wdt_open(struct inode *inode, struct file *file)
{
if (test_and_set_bit(MV64x60_WDOG_FLAG_OPENED, &wdt_flags))
@@ -118,9 +131,11 @@ static ssize_t mv64x60_wdt_write(struct
static int mv64x60_wdt_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
+ int timeout;
void __user *argp = (void __user *)arg;
static struct watchdog_info info = {
- .options = WDIOF_KEEPALIVEPING,
+ .options = WDIOF_SETTIMEOUT |
+ WDIOF_KEEPALIVEPING,
.firmware_version = 0,
.identity = "MV64x60 watchdog",
};
@@ -150,7 +165,10 @@ static int mv64x60_wdt_ioctl(struct inod
break;
case WDIOC_SETTIMEOUT:
- return -EOPNOTSUPP;
+ if (get_user(timeout, (int __user *)argp))
+ return -EFAULT;
+ mv64x60_wdt_set_timeout(timeout);
+ /* Fall through */
case WDIOC_GETTIMEOUT:
if (put_user(mv64x60_wdt_timeout, (int __user *)argp))
@@ -182,15 +200,22 @@ static struct miscdevice mv64x60_wdt_mis
static int __devinit mv64x60_wdt_probe(struct platform_device *dev)
{
struct mv64x60_wdt_pdata *pdata = dev->dev.platform_data;
- int bus_clk = 133;
struct resource *r;
+ int timeout = 10;
- mv64x60_wdt_timeout = 10;
+ bus_clk = 133; /* in MHz */
if (pdata) {
- mv64x60_wdt_timeout = pdata->timeout;
+ timeout = pdata->timeout;
bus_clk = pdata->bus_clk;
}
+ /* Since bus_clk is truncated MHz, actual frequency could be
+ * up to 1MHz higher. Round up, since it's better to time out
+ * too late than too soon.
+ */
+ bus_clk++;
+ bus_clk *= 1000000; /* convert to Hz */
+
r = platform_get_resource(dev, IORESOURCE_MEM, 0);
if (!r)
return -ENODEV;
@@ -199,8 +224,7 @@ static int __devinit mv64x60_wdt_probe(s
if (mv64x60_wdt_regs == NULL)
return -ENOMEM;
- writel((mv64x60_wdt_timeout * (bus_clk * 1000000)) >> 8,
- mv64x60_wdt_regs + MV64x60_WDT_WDC_OFFSET);
+ mv64x60_wdt_set_timeout(timeout);
return misc_register(&mv64x60_wdt_miscdev);
}
next prev parent reply other threads:[~2007-07-24 18:15 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-24 18:07 [PATCH 01/11] mv64x60_wdt: set up platform_device in platform code Dale Farnsworth
2007-07-24 18:09 ` [PATCH 02/11] mv64x60_wdt: Get register address from platform data Dale Farnsworth
2007-07-24 18:12 ` [PATCH 03/11] mv64x60_wdt: Add arch/powerpc platform support Dale Farnsworth
2007-07-24 18:13 ` [PATCH 04/11] mv64x60_wdt: Check return value of nonseekable_open Dale Farnsworth
2007-07-24 18:14 ` [PATCH 05/11] mv64x60_wdt: Fix WDIOC_GETTIMEOUT return value Dale Farnsworth
2007-07-24 18:15 ` Dale Farnsworth [this message]
2007-07-24 18:16 ` [PATCH 07/11] mv64x60_wdt: Add WDIOC_SETOPTIONS ioctl support Dale Farnsworth
2007-07-24 18:17 ` [PATCH 08/11] mv64x60_wdt: Add a module parameter to change nowayout setting Dale Farnsworth
2007-07-24 18:18 ` [PATCH 09/11] mv64x60_wdt: Support the WDIOF_MAGICCLOSE feature Dale Farnsworth
2007-07-24 18:19 ` [PATCH 10/11] mv64x60_wdt: disable watchdog timer when driver is probed Dale Farnsworth
2007-07-24 18:20 ` [PATCH 11/11] mv64x60_wdt_cleanup_low_level_wdt_code.patch Dale Farnsworth
2007-07-24 18:31 ` [PATCH 11/11, corrected] mv64x60_wdt: Rework the timeout register manipulation Dale Farnsworth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070724181526.GF27445@xyzzy.farnsworth.org \
--to=dale@farnsworth.org \
--cc=linux-kernel@vger.kernel.org \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome