Re: Problem with saa7134 driver (tuner doesn't tune specific stations)

[Andrew Morton <akpm@linux-foundation.org>]

(cc v4l list)

On Tue, 24 Jul 2007 13:29:31 +0300 "Khelben Blackstaff" <eye.of.the.8eholder@gmail.com> wrote:

> Hello.
> 
> I have a "Terratec Cinergy HT PCI" tuner which works perfectly with
> 2.6.21 kernel.
> With 2.6.22 kernel it doesn't tune specific stations while it tunes
> others fine.
> I browsed the lkml from 13/05 (date the 2.6.22-rc1 was released) but
> haven't found
> anything similar nor in google. I have also tried 2.6.23-rc1 to see if
> its fixed.
> 
> lspci output:
> 01:0a.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135
> Video Broadcast Decoder (rev d1)
> lspci -n output:
> 01:0a.0 0480: 1131:7133 (rev d1)
> 
> dmesg output (same for 2.6.21/22/23-rc1):
> saa7130/34: v4l2 driver version 0.2.14 loaded
> ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 21 (level, low) -> IRQ 21
> saa7133[0]: found at 0000:01:0a.0, rev: 209, irq: 21, latency: 64,
> mmio: 0xcdcff800
> saa7133[0]: subsystem: 153b:1175, board: Terratec Cinergy HT PCI
> [card=108,autodetected]
> saa7133[0]: board init: gpio is 0
> saa7133[0]: i2c eeprom 00: 3b 15 75 11 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
> saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff 00 01 50 32 79 01 3c ca 50
> saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 00 06 ff 00 94 02 51 96 2b
> saa7133[0]: i2c eeprom 30: a7 58 7a 1f 03 8e 84 5e da 7a 04 b3 05 87 b2 3c
> saa7133[0]: i2c eeprom 40: ff 21 00 c0 96 10 03 32 15 10 fd 79 44 9f c2 8f
> saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> tuner 0-004b: chip found @ 0x96 (saa7133[0])
> tuner 0-004b: setting tuner address to 60
> tuner 0-004b: type set to tda8290+75a
> tuner 0-004b: setting tuner address to 60
> tuner 0-004b: type set to tda8290+75a
> saa7133[0]: registered device video0 [v4l2]
> saa7133[0]: registered device vbi0
> saa7134 ALSA driver for DMA sound loaded
> saa7133[0]/alsa: saa7133[0] at 0xcdcff800 irq 21 registered as card -1
> 
> the .config was copied from 2.6.21 -> 2.6.22 -> 2.6.23-rc1 and no
> option regarding
> the media/video was changed.
> 
> the behaviour is the same with xdtv and tvtime programs.
> 
> I have the following channels stored:
> UHF 23, 24, 25, 26, 27, 39, 43, 51, 54, 62, 65
> 
> With 2.6.21 every station works fine.
> With 2.6.22+ i get the following behavior:
> 23, 25, 26, 39, 43, 51, 54 work fine while
> 24, 27, 62, 65 have sound but no video.
> 
> The channels that don't work aren't small channels with low signal
> quality, they have
> the same quality with those that work, so i guess its not something
> about antenna quality.
> 
> Has anyone the same problem ?
> If you need any more info, please tell me.
> 
> Please CC me.
> Thank you for your time.