From: Nick Pasich <NewsLetters@NickAndBarb.net>
To: Adam Kropelin <akropel1@rochester.rr.com>
Cc: Nick Pasich <NewsLetters@NickAndBarb.net>,
Andrew Morton <akpm@linux-foundation.org>,
linux-usb-devel@lists.sourceforge.net,
Greg Kroah-Hartman <greg@kroah.com>,
Al Borchers <alborchers@steinerpoint.com>,
linux-kernel@vger.kernel.org, Peter Berger <pberger@brimson.com>
Subject: Re: [linux-usb-devel] Edgeport UPS Monitoring Problems
Date: Sun, 29 Jul 2007 07:36:02 -0700 [thread overview]
Message-ID: <20070729143602.GA14118@69.17.112.251> (raw)
In-Reply-To: <008001c7d1e9$6a8625b0$03c8a8c0@kroptech.com>
Adam,
Yep..... That did it....
Thank You Very Much for your Super Quick Fix......
---( Nick )---
On Sun, Jul 29, 2007 at 10:04:44AM -0400, Adam Kropelin wrote:
> From: "Nick Pasich" <NewsLetters@NickAndBarb.net>
> >Here's the dmesg output ......
> >
> >[...]
> >Jul 29 05:20:07 NICK2 kernel: drivers/usb/serial/io_edgeport.c: LCR -
> >write to send_cmd_write_uart_register register 0x03
> >Jul 29 05:20:07 NICK2 kernel: drivers/usb/serial/io_edgeport.c:
> >SendCmdWriteUartReg - Not writing to MCR Register
> >Jul 29 05:20:07 NICK2 kernel: drivers/usb/serial/io_edgeport.c: MCR -
> >write to send_cmd_write_uart_register register 0x0b
> >Jul 29 05:20:07 NICK2 kernel: drivers/usb/serial/io_edgeport.c:
> >SendCmdWriteUartReg - Not writing to MCR Register
> >Jul 29 05:20:07 NICK2 kernel: drivers/usb/serial/io_edgeport.c:
> >change_port_settings - baud rate = 9600
> >Jul 29 05:20:07 NICK2 kernel: drivers/usb/serial/io_edgeport.c:
> >SendCmdWriteBaudRate - NOT Setting baud rate for port = 0, baud = 9600
>
> Yup, there's what I expected. Not setting the baud rate and not writing
> status registers is unlikely to produce working results. This 9600 must
> be the default setting being applied.
>
> >Jul 29 05:20:07 NICK2 kernel: drivers/usb/serial/io_edgeport.c:
> >SendCmdWriteUartReg - Not writing to MCR Register
> >Jul 29 05:20:07 NICK2 kernel: drivers/usb/serial/io_edgeport.c: MCR -
> >write to send_cmd_write_uart_register register 0x0b
> >Jul 29 05:20:07 NICK2 kernel: drivers/usb/serial/io_edgeport.c:
> >SendCmdWriteUartReg - Not writing to MCR Register
> >Jul 29 05:20:07 NICK2 kernel: drivers/usb/serial/io_edgeport.c:
> >change_port_settings - baud rate = 2400
> >Jul 29 05:20:07 NICK2 kernel: drivers/usb/serial/io_edgeport.c:
> >SendCmdWriteBaudRate - NOT Setting baud rate for port = 0, baud = 2400
>
> Here's apcupsd trying to set 2400 baud.
>
> Please try the attached patch (against 2.6.22.1). This will allow
> writing to the baud rate and MCR/LCR registers on non-EPIC adapters. I
> suspect the previous code was a copy-paste error.
>
> --Adam
--
--------
WebSite: http://NickAndBarb.net
--------
prev parent reply other threads:[~2007-07-29 14:37 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-27 20:37 Nick Pasich
2007-07-27 22:22 ` Andrew Morton
2007-07-28 23:10 ` [linux-usb-devel] " Adam Kropelin
2007-07-29 12:48 ` Nick Pasich
2007-07-29 14:04 ` Adam Kropelin
2007-07-29 14:36 ` Nick Pasich [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070729143602.GA14118@69.17.112.251 \
--to=newsletters@nickandbarb.net \
--cc=akpm@linux-foundation.org \
--cc=akropel1@rochester.rr.com \
--cc=alborchers@steinerpoint.com \
--cc=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb-devel@lists.sourceforge.net \
--cc=pberger@brimson.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®