From: Mikko Rapeli <mikko.rapeli@iki.fi>
To: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: early boot lockup with 2.6.23-rc1
Date: Fri, 10 Aug 2007 22:50:10 +0300 [thread overview]
Message-ID: <20070810195010.GB2298@nalle> (raw)
In-Reply-To: <46BCBD57.3030406@zytor.com>
On Fri, Aug 10, 2007 at 12:32:39PM -0700, H. Peter Anvin wrote:
> Could you please describe your hardware configuration, in particular:
In http://marc.info/?l=linux-kernel&m=118661306932149&w=2 but here
again:
> - what BIOS are you using;
*-firmware
description: BIOS
vendor: Award Software, Inc.
physical id: 0
version: #401A0-0106xl (06/16/97)
size: 64KB
capacity: 64KB
capabilities: isa pci pnp apm upgrade shadowing escd cdboot
bootselec socketedrom edd int13floppynec int13floppy360
int13floppy1200 int13floppy720 \
int13floppy2880 int5printscreen int9keyboard int14serial int17p
int10video
> - what disks, floppies, CD-ROMs, USB drives, etc are in your system;
*-ide
description: IDE interface
product: 82371AB/EB/MB PIIX4 IDE
vendor: Intel Corporation
physical id: 1.1
bus info: pci@00:01.1
version: 01
width: 32 bits
clock: 33MHz
capabilities: ide bus_master
configuration: driver=PIIX_IDE latency=32
resources: ioport:e000-e00f
*-ide:0
description: IDE Channel 0
physical id: 0
bus info: ide@0
logical name: ide0
clock: 33MHz
*-disk
description: ATA Disk
product: IBM-DJNA-351520
vendor: IBM
physical id: 0
bus info: ide@0.0
logical name: /dev/hda
version: J56OA30K
serial: G80GLT9A589
size: 2016MB
capacity: 2016MB
capabilities: ata dma lba iordy smart security pm
partitioned
partitioned:dos
configuration: mode=udma2 smart=on
*-volume:0
description: Linux swap / Solaris partition
physical id: 1
bus info: ide@0.0,1
logical name: /dev/hda1
capacity: 486MB
capabilities: primary nofs
*-volume:1
description: Linux filesystem partition
physical id: 2
bus info: ide@0.0,2
logical name: /dev/hda2
capacity: 964MB
capabilities: primary bootable
*-volume:2
description: Linux filesystem partition
physical id: 3
bus info: ide@0.0,3
logical name: /dev/hda3
capacity: 564MB
capabilities: primary
*-ide:1
description: IDE Channel 1
physical id: 1
bus info: ide@1
logical name: ide1
clock: 33MHz
*-disk
description: ATA Disk
product: ST340823A
vendor: Seagate
physical id: 1
bus info: ide@1.1
logical name: /dev/hdd
version: 3.07
serial: 7EF1EYYG
size: 37GB
capacity: 37GB
capabilities: ata dma lba iordy smart security pm
partitioned
partitioned:dos
configuration: mode=udma2 smart=on
*-volume:0
description: Linux LVM Physical Volume partition
physical id: 1
bus info: ide@1.1,1
logical name: /dev/hdd1
serial: YwheMf-s0pv-97XS-sAOB-oGSk-WcHA-ZEo8Ag
size: 9601MB
capacity: 9601MB
capabilities: primary multi lvm2
*-volume:1
description: Linux LVM Physical Volume partition
physical id: 2
bus info: ide@1.1,2
logical name: /dev/hdd2
serial: TEN6QM-MVlA-LDlO-Moiu-O7mU-VTfZ-pinLz6
size: 15GB
capacity: 15GB
capabilities: primary multi lvm2
*-volume:2
description: Linux LVM Physical Volume partition
physical id: 3
bus info: ide@1.1,3
logical name: /dev/hdd3
serial: b9Xviu-XSOP-9lz4-4gcY-tE9W-fqxA-k2amBh
size: 12GB
capacity: 12GB
capabilities: primary multi lvm2
> - are any of them RAIDed;
No.
> - what device and bootloader are you using for boot.
The first disk, IBM-DJNA-351520, and grub 0.97-27 from Debian:
title Debian GNU/Linux, kernel 2.6.23-rc2
root (hd0,1)
kernel /boot/vmlinuz-2.6.23-rc2 root=/dev/hda2 ro
initrd /boot/initrd.img-2.6.23-rc2
savedefault
next prev parent reply other threads:[~2007-08-10 19:50 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-08 22:31 Mikko Rapeli
2007-08-09 0:02 ` Andrew Morton
2007-08-09 4:57 ` Mikko Rapeli
2007-08-09 5:09 ` Andrew Morton
2007-08-09 5:24 ` Mikko Rapeli
2007-08-09 7:25 ` H. Peter Anvin
2007-08-09 7:53 ` Mikko Rapeli
2007-08-09 18:23 ` Mikko Rapeli
2007-08-09 19:43 ` Mikko Rapeli
2007-08-09 22:26 ` H. Peter Anvin
2007-08-10 16:33 ` Mikko Rapeli
2007-08-10 16:45 ` H. Peter Anvin
2007-08-10 19:20 ` Mikko Rapeli
2007-08-10 19:32 ` H. Peter Anvin
2007-08-10 19:50 ` Mikko Rapeli [this message]
2007-08-10 22:38 ` Mikko Rapeli
2007-08-10 22:50 ` H. Peter Anvin
2007-08-11 4:42 ` Mikko Rapeli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070810195010.GB2298@nalle \
--to=mikko.rapeli@iki.fi \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®