From: Alan Cox <alan@lxorguk.ukuu.org.uk>
To: John Sigler <linux.kernel@free.fr>
Cc: linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
Date: Fri, 31 Aug 2007 12:49:58 +0100 [thread overview]
Message-ID: <20070831124958.6f2104ec@the-village.bc.nu> (raw)
In-Reply-To: <46D7CFD7.9030404@free.fr>
> When a DMA operation is enabled, CS0- and CS1- shall not be asserted and
> transfers shall be 16-bits wide.
>
> I took the above to mean the device was designed to support DMA.
> Where did I err?
The bus is specified for DMA, not the device.
>
> > The data sheet says the media can only do 4.1MB/second which is
> > consistent with only needing PIO2 (actually it's far slower than PIO2)
>
> Is such a slow speed typical of DOMs sold today?
>
> Or do DOMs sold today support DMA bus mastering, much higher interface
> rates, and much higher sustained throughput?
Most CF is pretty slow but the newer CF cards do DMA and are getting far
better.
And yes I'd expect your real time app to deal for 3 or 4mS
(Mind you you'll get 1mS normal operating worst cases off even a fast DMA
IDE disk)
next prev parent reply other threads:[~2007-08-31 11:42 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-29 16:29 John Sigler
2007-08-29 16:46 ` Alan Cox
2007-08-30 8:17 ` John Sigler
[not found] ` <46D69E03.9080403@vc.cvut.cz>
2007-08-30 12:30 ` John Sigler
2007-08-30 15:10 ` John Sigler
2007-08-30 23:31 ` Alan Cox
2007-08-31 8:22 ` John Sigler
2007-08-31 9:04 ` PROBLEM: kernel 2.6.22.6 pata_pdc202xx_old.c limiting to UDMA/33 instead of UDMA/100 (UPDATED 2.6.22.6) n
2007-08-31 11:49 ` Alan Cox [this message]
[not found] ` <200708310904.l7V94YE4015312@mi0.bluebottle.com>
2007-09-01 14:58 ` Sergei Shtylyov
[not found] ` <311601c90708301534g47b2bca7t77debde058781572@mail.gmail.com>
2007-08-31 8:41 ` hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } John Sigler
2007-09-01 15:48 ` Sergei Shtylyov
2007-08-30 14:05 ` Alan Cox
2007-08-31 20:22 ` Sergei Shtylyov
2007-09-01 15:38 ` Sergei Shtylyov
2007-09-03 13:17 ` John Sigler
2007-09-03 13:40 ` Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070831124958.6f2104ec@the-village.bc.nu \
--to=alan@lxorguk.ukuu.org.uk \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux.kernel@free.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®