mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Nathanael Nerode <neroden@fastmail.fm>
To: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] dgrs: remove from build, config, and maintainer list
Date: Wed, 12 Sep 2007 03:39:20 -0400	[thread overview]
Message-ID: <20070912073920.GA6608@doctormoo.dyndns.org> (raw)

From: Nathanael Nerode

Stop building and configuring driver for Digi RightSwitch, which was 
never actually sold to anyone, and remove it from MAINTAINERS.

In response to an investigation into the firmware of the "Digi Rightswitch" 
driver, Andres Salomon discovered:
>
> Dear Andres:
>
> After further research, we found that this product was killed in place
> and never reached the market.  We would like to request that this not be
> included.  

Since the product never reached market, clearly nobody is using this orphaned 
driver.

Signed-off-by: Nathanael Nerode <neroden@gcc.gnu.org>

---

This is patch 1 of 2 for removing the "Digi Rightswitch" (dgrs).

Patch 2 would be the patch to remove the actual files.  However, that would
be around 400K, which doesn't seem suitable for a mailing list -- and this 
length seems quite unnecessary, given that it would consist solely of full-file 
deletions.  I'm not quite sure what to do about this.  Please advise.

These are the files to be deleted:
./Documentation/networking/dgrs.txt
./drivers/net/dgrs.c
./drivers/net/dgrs.h
./drivers/net/dgrs_asstruct.h
./drivers/net/dgrs_bcomm.h
./drivers/net/dgrs_es4h.h
./drivers/net/dgrs_ether.h
./drivers/net/dgrs_firmware.c (this is the very large one)
./drivers/net/dgrs_i82596.h
./drivers/net/dgrs_plx9060.h

diff -upr linux-2.6.22.6/drivers/net/Kconfig linux-2.6-deleted/drivers/net/Kconfig
--- linux-2.6.22.6/drivers/net/Kconfig	2007-08-31 02:21:01.000000000 -0400
+++ linux-2.6-deleted/drivers/net/Kconfig	2007-09-12 03:28:11.000000000 -0400
@@ -1447,21 +1447,6 @@ config TC35815
 	depends on NET_PCI && PCI && MIPS
 	select MII
 
-config DGRS
-	tristate "Digi Intl. RightSwitch SE-X support"
-	depends on NET_PCI && (PCI || EISA)
-	---help---
-	  This is support for the Digi International RightSwitch series of
-	  PCI/EISA Ethernet switch cards. These include the SE-4 and the SE-6
-	  models.  If you have a network card of this type, say Y and read the
-	  Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.  More specific
-	  information is contained in <file:Documentation/networking/dgrs.txt>.
-
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module
-	  will be called dgrs.
-
 config EEPRO100
 	tristate "EtherExpressPro/100 support (eepro100, original Becker driver)"
 	depends on NET_PCI && PCI
diff -upr linux-2.6.22.6/drivers/net/Makefile linux-2.6-deleted/drivers/net/Makefile
--- linux-2.6.22.6/drivers/net/Makefile	2007-08-31 02:21:01.000000000 -0400
+++ linux-2.6-deleted/drivers/net/Makefile	2007-09-12 03:28:31.000000000 -0400
@@ -38,7 +38,6 @@ obj-$(CONFIG_CASSINI) += cassini.o
 obj-$(CONFIG_MACE) += mace.o
 obj-$(CONFIG_BMAC) += bmac.o
 
-obj-$(CONFIG_DGRS) += dgrs.o
 obj-$(CONFIG_VORTEX) += 3c59x.o
 obj-$(CONFIG_TYPHOON) += typhoon.o
 obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o
diff -upr linux-2.6.22.6/MAINTAINERS linux-2.6-deleted/MAINTAINERS
--- linux-2.6.22.6/MAINTAINERS	2007-08-31 02:21:01.000000000 -0400
+++ linux-2.6-deleted/MAINTAINERS	2007-09-12 03:27:26.000000000 -0400
@@ -1234,12 +1234,6 @@ L:	Eng.Linux@digi.com
 W:	http://www.digi.com
 S:	Orphaned
 
-DIGI RIGHTSWITCH NETWORK DRIVER
-P:	Rick Richardson
-L:	netdev@vger.kernel.org
-W:	http://www.digi.com
-S:	Orphaned
-
 DIRECTORY NOTIFICATION
 P:	Stephen Rothwell
 M:	sfr@canb.auug.org.au

-- 
Nathanael Nerode  <neroden@fastmail.fm>

[Insert famous quote here]

                 reply	other threads:[~2007-09-12  7:39 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070912073920.GA6608@doctormoo.dyndns.org \
    --to=neroden@fastmail.fm \
    --cc=linux-kernel@vger.kernel.org \
    --cc=neroden@gcc.gnu.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®