From: Grant Likely <grant.likely@secretlab.ca>
To: linux-kernel@vger.kernel.org, linuxppc-dev@ozlabs.org,
paulus@samba.org, axboe@kernel.dk
Subject: [PATCH v2 4/6] Sysace: minor rework and cleanup changes
Date: Sun, 30 Sep 2007 16:57:21 -0600 [thread overview]
Message-ID: <20070930225720.2476.45305.stgit@trillian.cg.shawcable.net> (raw)
In-Reply-To: <20070930225112.2476.49914.stgit@trillian.cg.shawcable.net>
From: Grant Likely <grant.likely@secretlab.ca>
Miscellanious rework to the sysace driver; Not critical, but makes the
subsequent addition of the of_platform bus binding a wee bit cleaner
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
drivers/block/xsysace.c | 12 +++++++++---
1 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index 555939b..10bb4e5 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -158,6 +158,9 @@ MODULE_LICENSE("GPL");
#define ACE_FIFO_SIZE (32)
#define ACE_BUF_PER_SECTOR (ACE_SECTOR_SIZE / ACE_FIFO_SIZE)
+#define ACE_BUS_WIDTH_8 0
+#define ACE_BUS_WIDTH_16 1
+
struct ace_reg_ops;
struct ace_device {
@@ -931,9 +934,11 @@ static int __devinit ace_setup(struct ace_device *ace)
{
u16 version;
u16 val;
-
int rc;
+ dev_dbg(ace->dev, "ace_setup(ace=0x%p)\n", ace);
+ dev_dbg(ace->dev, "physaddr=0x%lx irq=%i\n", ace->physaddr, ace->irq);
+
spin_lock_init(&ace->lock);
init_completion(&ace->id_completion);
@@ -982,7 +987,7 @@ static int __devinit ace_setup(struct ace_device *ace)
snprintf(ace->gd->disk_name, 32, "xs%c", ace->id + 'a');
/* set bus width */
- if (ace->bus_width == 1) {
+ if (ace->bus_width == ACE_BUS_WIDTH_16) {
/* 0x0101 should work regardless of endianess */
ace_out_le16(ace, ACE_BUSMODE, 0x0101);
@@ -1117,7 +1122,7 @@ static void __devexit ace_free(struct device *dev)
static int __devinit ace_probe(struct platform_device *dev)
{
unsigned long physaddr = 0;
- int bus_width = 1; /* FIXME: should not be hard coded */
+ int bus_width = ACE_BUS_WIDTH_16; /* FIXME: should not be hard coded */
int id = dev->id;
int irq = NO_IRQ;
int i;
@@ -1166,6 +1171,7 @@ static int __init ace_init(void)
goto err_blk;
}
+ pr_debug("xsysace: registering platform binding\n");
if ((rc = platform_driver_register(&ace_platform_driver)) != 0)
goto err_plat;
next prev parent reply other threads:[~2007-09-30 22:58 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-30 22:56 [PATCH v2 0/6] SystemACE: rework and of_platform bus binding patches Grant Likely
2007-09-30 22:57 ` [PATCH v2 1/6] Add Xilinx SystemACE entry to maintainers Grant Likely
2007-09-30 22:57 ` [PATCH v2 2/6] Sysace: Use the established platform bus api Grant Likely
2007-09-30 23:05 ` Christoph Hellwig
2007-09-30 23:33 ` Grant Likely
2007-10-01 11:59 ` Jens Axboe
2007-10-01 13:17 ` Grant Likely
2007-10-02 5:58 ` Benjamin Herrenschmidt
2007-10-02 6:35 ` Jens Axboe
2007-10-02 13:52 ` Grant Likely
2007-09-30 22:57 ` [PATCH v2 3/6] Sysace: Move structure allocation from bus binding into common code Grant Likely
2007-09-30 22:57 ` Grant Likely [this message]
2007-09-30 22:57 ` [PATCH v2 5/6] Sysace: Move IRQ handler registration to occur after FSM is initialized Grant Likely
2007-10-02 5:55 ` Benjamin Herrenschmidt
2007-10-02 13:57 ` Grant Likely
2007-09-30 22:57 ` [PATCH v2 6/6] Sysace: Add of_platform_bus binding Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070930225720.2476.45305.stgit@trillian.cg.shawcable.net \
--to=grant.likely@secretlab.ca \
--cc=axboe@kernel.dk \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome