Re: [lm-sensors] hwmon/f75375s.c: buggy if()

["Mark M. Hoffman" <mhoffman@lightlink.com>]

Hi:

* Riku Voipio <riku.voipio@iki.fi> [2007-10-26 14:14:23 +0300]:
> On Fri, Oct 26, 2007 at 10:36:47AM +0200, Jean Delvare wrote:
> > Patch looks correct, however it doesn't apply on top of Mark's tree. I
> > was able to get it to apply by reverting "(f75375s) fix pwm mode
> > setting" first, but then the build fails. Presumably the other f75375s
> > patches interact badly. Can you please respin this patch on top of
> > Mark's tree (i.e. on top the the 4 other f75375s patches you sent since
> > the -rc1 merge)? Thanks.
> 
> The surrounding code had wandered to another function, so it's suprising
> it applied at all. Here's respin.
> 
> -- 
> "rm -rf" only sounds scary if you don't have backups

> >From 4de69e3ab5b5833cddb503f0dcb2a3ccc2d5b328 Mon Sep 17 00:00:00 2001
> From: Riku Voipio <riku.voipio@movial.fi>
> Date: Fri, 26 Oct 2007 13:53:50 +0300
> Subject: [PATCH] hwmon (f75375s) fix buggy if() properly
> 
>  Fix value check in set_pwm_mode(). Instead of checking for
>  chip variant there, make pwmX_mode sysfs nodes only writable
>  on f75375 variant.
> 
> Signed-off-by: Riku Voipio <riku.voipio@movial.fi>
> ---
>  drivers/hwmon/f75375s.c |   19 ++++++++++++++++---
>  1 files changed, 16 insertions(+), 3 deletions(-)
> 

Applied to hwmon-2.6.git/testing, thanks.

-- 
Mark M. Hoffman
mhoffman@lightlink.com